On Wed, Apr 15, 2020 at 12:14:22PM +0200, Ahmad Fatoum wrote:
> Commit 8b2104d740 ("driver: Call of_clk_set_defaults for each probed device")
> made barebox act on the assigned-clock-parents property everywhere, not
> only for clock provider nodes. This breaks at least the serial console on
> the i.MX7 SabreSD board; only garbage is output if the patch is not
> reverted. As stopgap measure, override these properties for all enabled
> uart nodes in the barebox i.MX7 device tree. This reverts the behavior
> to what it was like before the offending commit.
>
> This is of course no real solution, as obviously Linux was fine dealing
> with these properties before. But this hack should at least fix the
> serial console for the boards that were broken in v2020.03.0.
>
> When a proper fix follows, this patch can be reverted.
>
> Cc: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
> Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> Cc: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
> Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
> ---
> Hello Sascha,
>
> please apply to master, so the boards broken in v2020.03.0
> aren't broken in v2020.04.0 as well.
Applied, thanks
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
