On Mon, Apr 27, 2020 at 09:13:49AM +0200, Ahmad Fatoum wrote: > `mw 0x20d8040 0x08000030; mw 0x20d8044 0x10000000; reset` issued on an > i.MX6Q forces boot from the ecspi1. This is because the BootROM reads > the boot mode out of SRC_GPR9 instead of SRC_SBMR1 whenever SRC_GPR10 > has its 28th bit set. Is this documented somewhere? The reference Manual marks SRC_GPR9 and SRC_GPR10 as | This register is used by the ROM code and should not be used | by application software. And why do you depend on this behaviour? Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
