Hi Clement, On Sat, Apr 04, 2020 at 10:29:04PM +0200, Clement Leger wrote: > Kalray kv3 core is embedded in Kalray Coolidge SoC. This core which is the > third of the KV family has the following features: > - 32/64 bits execution mode > - 6-issue VLIW architecture > - 64 x 64bits general purpose registers > - SIMD instructions > - little-endian > > This port is a 64 bits one and allows to boot up to a barebox prompt on a k200 > board. kv3 support for clocksource and watchdog is also part of this port. > > In order to build a usable toolchain, build scripts are provided at the > following address: https://github.com/kalray/build-scripts. I merged the series with the comments I made to the timer driver. I am currently on my way trying the toolchain build scripts. If this succeeds I can add the coolidge support to my defconfig builds. It would be nice if you could add a few words to Documentation/boards/coolidge.rst to let the user know what this is all about. Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
