On Thu, Apr 02, 2020 at 03:03:41PM +0800, you xiaojie wrote: > the debugging message. > > allan@allan-home:/media/allan/c6293bbf-6fa1-49ca-9b01-24855a810e0e/barebox- > test/barebox$ ./scripts/kwboot -b ./images/barebox-huanshuo-hs50a.img -n 15 -B > 115200 -t /dev/ttyUSB0 > Sending boot message. Please reboot the target... > Got expected NAKs > Sending boot image... > 86 % [......................................................................] > 89 % [......................................................................] > 91 % [......................................................................] > 93 % [......................................................................] > 96 % [......................................................................] > 98 % [.............................................] > [Type Ctrl-\ + c to quit] > uncompress.c: memory at 0x00000000, size 0x20000000 > uncompress.c: enabling MMU, ttb @ 0x1ffe4000 > uncompress.c: uncompressing barebox binary at 0x010053e0 (size 0x00057dfe) to > 0x1fe00000 (uncompressed size: 0x000a4ee0) > uncompress.c: jumping to uncompressed image at 0x1fe00000 > start.c: memory at 0x00000000, size 0x20000000 > start.c: found DTB in boarddata, copying to 0x1fdfcc40 > start.c: initializing malloc pool at 0x0fefe620 (size 0x0fefe620) > start.c: starting barebox... > initcall-> globalvar_init+0x0/0x48 This looks all perfectly fine until here. I have no idea what goes wrong here. You need a binary.0 file for this board, right? Are you sure that works? Did you extract it from some working U-Boot? It might also be a toolchain related issue. Which toolchain are you using? Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
