While some support is still missing (USB, LCD), we already have some prerequisites in place like USB PHY and PWM (for backlight). We also have gained one new board and some other new drivers since the last time the defconfig was touched, so enable them all, as well as some possibly useful commands. Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> --- Documentation/boards/stm32mp.rst | 1 + arch/arm/configs/stm32mp_defconfig | 28 +++++++++++++++++++++++----- 2 files changed, 24 insertions(+), 5 deletions(-) diff --git a/Documentation/boards/stm32mp.rst b/Documentation/boards/stm32mp.rst index de793ab3c96e..607c59fd0757 100644 --- a/Documentation/boards/stm32mp.rst +++ b/Documentation/boards/stm32mp.rst @@ -30,6 +30,7 @@ The resulting images will be placed under ``images/``: :: barebox-stm32mp157c-dk2.img + barebox-stm32mp157c-lxa-mc1.img Flashing barebox diff --git a/arch/arm/configs/stm32mp_defconfig b/arch/arm/configs/stm32mp_defconfig index f69f9f966a2d..4b902e174113 100644 --- a/arch/arm/configs/stm32mp_defconfig +++ b/arch/arm/configs/stm32mp_defconfig @@ -1,5 +1,6 @@ CONFIG_ARCH_STM32MP=y CONFIG_MACH_STM32MP157C_DK2=y +CONFIG_MACH_LXA_MC1=y CONFIG_THUMB2_BAREBOX=y CONFIG_ARM_BOARD_APPEND_ATAG=y CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y @@ -27,13 +28,14 @@ CONFIG_PARTITION_DISK_EFI=y # CONFIG_PARTITION_DISK_EFI_GPT_COMPARE is not set CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y CONFIG_RESET_SOURCE=y -CONFIG_MACHINE_ID=y CONFIG_CMD_DMESG=y CONFIG_LONGHELP=y CONFIG_CMD_IOMEM=y CONFIG_CMD_IMD=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_ARM_MMUINFO=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_MMC=y # CONFIG_CMD_BOOTU is not set CONFIG_CMD_GO=y CONFIG_CMD_RESET=y @@ -73,8 +75,10 @@ CONFIG_CMD_DETECT=y CONFIG_CMD_FLASH=y CONFIG_CMD_GPIO=y CONFIG_CMD_LED=y +CONFIG_CMD_POWEROFF=y CONFIG_CMD_WD=y CONFIG_CMD_BAREBOX_UPDATE=y +CONFIG_CMD_OF_DIFF=y CONFIG_CMD_OF_NODE=y CONFIG_CMD_OF_PROPERTY=y CONFIG_CMD_OFTREE=y @@ -84,8 +88,6 @@ CONFIG_NET_NETCONSOLE=y CONFIG_OFDEVICE=y CONFIG_OF_BAREBOX_DRIVERS=y CONFIG_DRIVER_SERIAL_STM32=y -CONFIG_DRIVER_NET_DESIGNWARE=y -CONFIG_DRIVER_NET_DESIGNWARE_GENERIC=y CONFIG_DRIVER_NET_DESIGNWARE_EQOS=y CONFIG_DRIVER_NET_DESIGNWARE_STM32=y CONFIG_AT803X_PHY=y @@ -94,23 +96,40 @@ CONFIG_REALTEK_PHY=y # CONFIG_SPI is not set CONFIG_I2C=y CONFIG_I2C_STM32=y +CONFIG_VIDEO=y +CONFIG_DRIVER_VIDEO_BACKLIGHT=y +CONFIG_DRIVER_VIDEO_SIMPLE_PANEL=y CONFIG_MCI=y CONFIG_MCI_STARTUP=y +CONFIG_MCI_MMC_BOOT_PARTITIONS=y CONFIG_MCI_STM32_SDMMC2=y CONFIG_MFD_STPMIC1=y +CONFIG_MFD_STM32_TIMERS=y CONFIG_LED=y CONFIG_LED_GPIO=y +CONFIG_LED_PWM=y CONFIG_LED_GPIO_OF=y +CONFIG_EEPROM_AT24=y +CONFIG_KEYBOARD_GPIO=y +CONFIG_INPUT_SPECIALKEYS=y CONFIG_WATCHDOG=y CONFIG_WATCHDOG_POLLER=y CONFIG_STM32_IWDG_WATCHDOG=y CONFIG_STPMIC1_WATCHDOG=y -CONFIG_NVMEM=y +CONFIG_PWM=y +CONFIG_PWM_STM32=y +CONFIG_HWRNG=y +CONFIG_HWRNG_STM32=y CONFIG_STM32_BSEC=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED=y +CONFIG_REGULATOR_STM32_PWR=y CONFIG_REGULATOR_STPMIC1=y +CONFIG_REMOTEPROC=y +CONFIG_STM32_REMOTEPROC=y CONFIG_RESET_STM32=y +CONFIG_GENERIC_PHY=y +CONFIG_PHY_STM32_USBPHYC=y CONFIG_FS_EXT4=y CONFIG_FS_TFTP=y CONFIG_FS_NFS=y @@ -119,4 +138,3 @@ CONFIG_FS_FAT_WRITE=y CONFIG_FS_FAT_LFN=y CONFIG_ZLIB=y CONFIG_CRC8=y -CONFIG_DIGEST_SHA1_ARM=y -- 2.26.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
