U-Boot V2 Development (Barebox)

• Thread Index

• Re: [PATCH] regulator: fixed: take regulator-boot-on into account
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ubsan: use a big if block in Kconfig
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] commands/test: Bail out on incomplete command line options
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] include: spi: add SPDX GPL-2.0-only license tags for files without licensing information
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] images: Use separate LDFLAGS for PBL
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/6] include: spi: add SPDX GPL-2.0-or-later license tags where applicable
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/6] include: add SPDX LGPL-2.1-or-later license tags where applicable
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] include: add SPDX GPL-2.0-only license tags for files without licensing information
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] include: add SPDX GPL-2.0-or-later license tags where applicable
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] include: add SPDX GPL-2.0-only license tags where applicable
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] RISC-V: unbreak built-in dtb
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 5/6] include: spi: add SPDX GPL-2.0-or-later license tags where applicable
  • From: Roland Hieber <rohieb@xxxxxxxxxxx>
• [PATCH v2 6/6] include: spi: add SPDX GPL-2.0-only license tags for files without licensing information
  • From: Roland Hieber <rohieb@xxxxxxxxxxx>
• [PATCH v2 2/6] include: add SPDX GPL-2.0-or-later license tags where applicable
  • From: Roland Hieber <rohieb@xxxxxxxxxxx>
• [PATCH v2 0/6] SPDX license tags and (L)GPL boilerplate cleanup
  • From: Roland Hieber <rohieb@xxxxxxxxxxx>
• [PATCH v2 3/6] include: add SPDX GPL-2.0-only license tags for files without licensing information
  • From: Roland Hieber <rohieb@xxxxxxxxxxx>
• [PATCH v2 1/6] include: add SPDX GPL-2.0-only license tags where applicable
  • From: Roland Hieber <rohieb@xxxxxxxxxxx>
• [PATCH v2 4/6] include: add SPDX LGPL-2.1-or-later license tags where applicable
  • From: Roland Hieber <rohieb@xxxxxxxxxxx>
• [PATCH v2 1/3] regulator: pfuze: remove unsued define
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] regulator: pfuze: add support to other architectures
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] ARM: phyCORE-i.MX8M SOM: add pmic initialisation for power good
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 2/5] mci: stm32_sdmmc2: don't reset before retrying failed operations
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/4] mci: stm32_sdmmc2: timeout and bus-width bug fixes
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/5] mci: stm32_sdmmc2: compare ios ->bus_width with correct constants
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/5] mci: core: don't test 4-bit-buswidth support if MMC host lacks capability
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/5] mci: stm32_sdmmc2: use correct card power cycle sequence
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/5] mci: stm32_sdmmc2: fix typo in debug string
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: maeling list issue
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• maeling list issue
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] regulator: pfuze: add support to other architectures
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v4] MIPS: don't overlay relocation data with BSS
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] regulator: pfuze: add support to other architectures
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: Small tweak to get ACPI watchdog working (iTCO)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Small tweak to get ACPI watchdog working (iTCO)
  • From: Cameron Ferguson <cameron.bare86@xxxxxxxxx>
• Re: Small tweak to get ACPI watchdog working (iTCO)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Small tweak to get ACPI watchdog working (iTCO)
  • From: Cameron Ferguson <cameron.bare86@xxxxxxxxx>
• Re: Small tweak to get ACPI watchdog working (iTCO)
  • From: Cameron Ferguson <cameron.bare86@xxxxxxxxx>
• [PATCH] regulator: fixed: take regulator-boot-on into account
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] ubsan: use a big if block in Kconfig
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Small tweak to get ACPI watchdog working (iTCO)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v3] MIPS: remove .bss to __rel_start overlay
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: Small tweak to get ACPI watchdog working (iTCO)
  • From: Cameron Ferguson <cameron.bare86@xxxxxxxxx>
• Re: [PATCH v2] Documentation/sandbox: Add hint how to end a sandboxed barebox
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v3] MIPS: remove .bss to __rel_start overlay
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: relocate_code: fix relocation area size
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: relocate_code: fix relocation area size
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH] MIPS: relocate_code: fix relocation area size
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2] MIPS: remove .bss to __rel_start overlay
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] MIPS: relocate_code: fix relocation area size
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: Small tweak to get ACPI watchdog working (iTCO)
  • From: Cameron Ferguson <cameron.bare86@xxxxxxxxx>
• [PATCH v2] Documentation/sandbox: Add hint how to end a sandboxed barebox
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation/sandbox: Add hint how to end a sandboxed barebox
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation/sandbox: Add hint how to end a sandboxed barebox
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] Documentation/sandbox: Add hint how to end a sandboxed barebox
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH 3/3] commands/test: Implement -b and -c to test for character and block devices
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/3] commands/test: Improve option parsing to handle "]" less special
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/3] commands/test: Bail out on incomplete command line options
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 0/3] commands/test: some improvements
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: Barebox 2020.01.0 and Device Tree from Linux Kernel 5.4
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Small tweak to get ACPI watchdog working (iTCO)
  • From: Cameron Ferguson <cameron.bare86@xxxxxxxxx>
• Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: MIPS: relocation issue
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: MIPS: relocation issue
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• RE: MIPS: relocation issue
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH] fixup! ARM: add optee early loading function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [SPAM:54%] Re: [PATCH] barebox_banner: switch to pr_notice
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] fixup! ARM: add optee early loading function
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [SPAM:54%] Re: [PATCH] barebox_banner: switch to pr_notice
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: MIPS: relocation issue
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] barebox_banner: switch to pr_notice
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v1] MIPS: remove .bss to __rel_start overlay
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/5] OP-TEE early loading
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/5] optee: move optee_verify_header() to common
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] imd: replace magicvalue with sizeof(struct)
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] ARM: phyCORE-i.MX8M SOM: add pmic initialisation for power good
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] regulator: pfuze: add support to other architectures
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 9/9] usb: dwc2: Add gadget driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/7] usb: dwc2: Add host controller driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• MIPS: relocation issue
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v3 1/5] optee: move optee_verify_header() to common
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 5/5] user: add documentation for OP-TEE loading
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 3/5] ARM: add optee early loading function
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 0/5] OP-TEE early loading
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 2/5] ARM: import setjmp implementation from U-Boot
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 4/5] ARM: mach-imx: test PL310 write access
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 1/5] optee: move optee_verify_header() to common
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] bootm: Register as bootentry provider
  • From: Christian Eggers <ceggers@xxxxxx>
• Re: [PATCH v2 1/7] usb: dwc2: Add host controller driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [RFC PATCH 9/9] usb: dwc2: Add gadget driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH 1/4] regulator: pfuze: remove unsued define
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 2/4] regulator: pfuze: add support to other architectures
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 3/4] regulator: pfuze: add include regmap.h so struct regmap is known
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: phyCORE-i.MX8M SOM: add pmic initialisation for power good
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v4 2/3] imd: add support for checksum generation/verification
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v4 3/3] commands: bbu: add support for imd checksum
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v4 1/3] imd: replace magicvalue with sizeof(struct)
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 9/9] usb: dwc2: Add gadget driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] images: Use separate LDFLAGS for PBL
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH 0/2] gpiolib: minor optimization
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] common: make CONFIG_BAREBOX_UPDATE visible
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] gadget: f_fastboot: Fix memory leak
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] eeprom: at25: Allow page sizes greater than 16 bit
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx6: properly check for IPU presence
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] bootm: Register as bootentry provider
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] gpiolib: introduce helper functions working on gpio_info structs
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 0/2] gpiolib: minor optimization
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 1/2] gpiolib: reorder functions
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [RFC PATCH] bootm: Register as bootentry provider
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: Configuring for secure boot / Using bootchooser
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] state: remove param member from struct state_string
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] bootchooser: Change name of kernel parameter
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH] bootchooser: Change name of kernel parameter
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] bootchooser: Change name of kernel parameter
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH] barebox_banner: switch to pr_notice
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH] common: make CONFIG_BAREBOX_UPDATE visible
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH] gadget: f_fastboot: Fix memory leak
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH] eeprom: at25: Allow page sizes greater than 16 bit
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH] ARM: imx6: properly check for IPU presence
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: Barebox 2020.01.0 and Device Tree from Linux Kernel 5.4
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Barebox 2020.01.0 and Device Tree from Linux Kernel 5.4
  • From: gianluca <gianlucarenzi@xxxxxxxx>
• Re: [PATCH v2 1/7] usb: dwc2: Add host controller driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: udc: don't warn on unused gadget
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: udc: don't warn on unused gadget
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] usb: udc: don't warn on unused gadget
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• [PATCH 5/5] parameter: Return NULL instead of ENOSYS if CONFIG_PARAMETER is disabled
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 4/5] globalvar: Allow NULL pointers to be returned by dev_add_param()
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 3/5] state: remove param member from state_uint32, state_enum32, state_mac
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 2/5] mci: remove param_probe member from struct mci
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 1/5] state: remove param member from struct state_string
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH 1/3] watchdog: Select CONFIG_PARAMETER
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: Configuring for secure boot / Using bootchooser
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH 1/3] watchdog: Select CONFIG_PARAMETER
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: "Robert Berger@xxxxxxxxxx" <robert.berger.yocto.user@xxxxxxxxx>
• [RFC PATCH 7/9] usb: dwc2: Add getter for gadget fifo hwparams
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 9/9] usb: dwc2: Add gadget driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 8/9] usb: dwc2: gadget: Configure fifo size
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 6/9] usb: dwc2: Add structure for gadget driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 5/9] usb: dwc2: Add function to flush a tx fifo
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 4/9] usb: dwc2: Add otg state
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 3/9] usb: Update uses of usb_endpoint_maxp
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 2/9] BACKPORT: usb: ch9: make usb_endpoint_maxp() return only packet size
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 1/9] BACKPORT: usb: Add helper to extract bits 12:11 of wMaxPacketize
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 0/9] usb: Add dwc2 gadget driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2 1/7] usb: dwc2: Add host controller driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2 3/7] usb: dwc2: host: Rework roothub interface
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2 7/7] usb: dwc2: host: Rewrite dwc2_hc_init
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2 5/7] usb: dwc2: host: Dynamic fifo size support from Linux
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2 6/7] usb: dwc2: host: Fix toggle reset
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2 0/7] usb: dwc2 host driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2 2/7] usb: dwc2: host: Read dr_mode from device tree
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2 4/7] usb: dwc2: host: Handle dma mapping errors
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH 1/3] watchdog: Select CONFIG_PARAMETER
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH v3 2/3] imd: add support for checksum generation/verification
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: Fix error path
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: Select CONFIG_PARAMETER
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] param: Make enum param_tristate always visible
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• [PATCH] Partly revert "globalvar: fix crash if CONFIG_NVVAR is not set"
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [RFC PATCH 0/7] usb: dwc2 host driver
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• [PATCH 3/3] globalvar: Select CONFIG_PARAMETER
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 2/3] usb: otg: Select CONFIG_PARAMETER
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 1/3] watchdog: Select CONFIG_PARAMETER
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: Configuring for secure boot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] watchdog: Fix error path
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: Configuring for secure boot
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] param: Make enum param_tristate always visible
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH v2 2/5] ARM: import setjmp implementation from U-Boot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] ARM: mach-imx: test PL310 write access
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Configuring for secure boot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Configuring for secure boot
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH 5/5] watchdog: k1c: Add k1c watchdog support
  • From: Clément Leger <cleger@xxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] watchdog: k1c: Add k1c watchdog support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Issue CPU instructions to start watchdog?
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 2/3] imd: add support for checksum generation/verification
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v3 3/3] commands: bbu: add support for imd checksum
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v3 1/3] imd: replace magicvalue with sizeof(struct)
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH] PCI: layerscape: Allow to share stream_ids per host controller
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Issue CPU instructions to start watchdog?
  • From: Frederick Gotham <cauldwell.thomas@xxxxxxxxx>
• [PATCH v2 5/5] user: add documentation for OP-TEE loading
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 3/5] ARM: add optee early loading function
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 4/5] ARM: mach-imx: test PL310 write access
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 2/5] ARM: import setjmp implementation from U-Boot
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 1/5] optee: move optee_verify_header() to common
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH] pinctrl-single: Handle "pinctrl-single, function-mask" dt property
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: add optee early loading function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] pinctrl: imx-v3: Support for imx6ull-iomuxc-snvs
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] nvmem: ocotp: Support for i.MX6ULL/ULZ
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: designware: eqos: don't funnel all MDIO writes to register 0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/4] user: add documentation for OP-TEE loading
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 1/4] optee: move optee_verify_header() to common
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 2/4] ARM: add optee early loading function
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: mach-imx: OPTEE PBL configures PL210
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH] net: designware: eqos: don't funnel all MDIO writes to register 0
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] pinctrl: imx-v3: Support for imx6ull-iomuxc-snvs
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH] nvmem: ocotp: Support for i.MX6ULL/ULZ
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH] lds: Fix alignment of initcall table
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: Cannot get 'wd' to appear
  • From: Frederick Gotham <cauldwell.thomas@xxxxxxxxx>
• Re: Cannot get 'wd' to appear
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Cannot get 'wd' to appear
  • From: Frederick Gotham <cauldwell.thomas@xxxxxxxxx>
• Re: [PATCH] lds: Fix alignment of initcall table
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH] lds: Fix alignment of initcall table
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [RFC PATCH 0/7] usb: dwc2 host driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• Re: [PATCH] Revert "clocksource: ARMv8 timer can only be built on ARMv8"
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
  • From: Clément Leger <cleger@xxxxxxxxx>
• Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
  • From: Clément Leger <cleger@xxxxxxxxx>
• [PATCH] fs: jffs2: add initial support for reading jffs2
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
  • From: Clément Leger <cleger@xxxxxxxxx>
• Re: [PATCH 0/5] Add support for Kalray k1c core
  • From: Clément Leger <cleger@xxxxxxxxx>
• Re: [PATCH 0/5] Add support for Kalray k1c core
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] Add support for Kalray k1c core
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] Add support for Kalray k1c core
  • From: Clément Leger <cleger@xxxxxxxxx>
• Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] Add support for Kalray k1c core
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] Add support for Kalray k1c core
  • From: Clément Leger <cleger@xxxxxxxxx>
• Re: [PATCH] MIPS: actually use CONFIG_MIPS_RELOCATION_TABLE_SIZE
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Revert "clocksource: ARMv8 timer can only be built on ARMv8"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] imx25: drop global over-current setting for USB
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: qemu-virt64: convert to assembly entry
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] Add support for Kalray k1c core
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/7] usb: dwc2 host driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Enrico Joerns <ejo@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Enrico Joerns <ejo@xxxxxxxxxxxxxx>
• [PATCH] MIPS: actually use CONFIG_MIPS_RELOCATION_TABLE_SIZE
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] Revert "clocksource: ARMv8 timer can only be built on ARMv8"
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/5] k1c: Add processor definitions
  • From: Clement Leger <cleger@xxxxxxxxx>
• [PATCH 5/5] watchdog: k1c: Add k1c watchdog support
  • From: Clement Leger <cleger@xxxxxxxxx>
• [PATCH 3/5] k1c: Add support for device tree
  • From: Clement Leger <cleger@xxxxxxxxx>
• [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
  • From: Clement Leger <cleger@xxxxxxxxx>
• [PATCH 4/5] clocksource: k1c: Add k1c clocksource support
  • From: Clement Leger <cleger@xxxxxxxxx>
• [PATCH 0/5] Add support for Kalray k1c core
  • From: Clement Leger <cleger@xxxxxxxxx>
• [PATCH] imx25: drop global over-current setting for USB
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: qemu arm vexpress / virt32 support
  • From: Wesley Chow <wes@xxxxxxxxxx>
• Re: [RFC 2/5] WIP: MIPS: implement dma mapping functions
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: qemu arm virt64 hangs
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH] ARM: qemu-virt64: convert to assembly entry
  • From: Lucas Stach <dev@xxxxxxxxxx>
• Re: qemu arm vexpress / virt32 support
  • From: Lucas Stach <dev@xxxxxxxxxx>
• qemu arm vexpress / virt32 support
  • From: Wesley Chow <wes@xxxxxxxxxx>
• qemu arm virt64 hangs
  • From: Wesley Chow <wes@xxxxxxxxxx>
• Re: [RFC PATCH 0/7] usb: dwc2 host driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH] pinctrl-single: Handle "pinctrl-single, function-mask" dt property
  • From: Clement Leger <cleger@xxxxxxxxx>
• Re: [RFC PATCH 0/7] usb: dwc2 host driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• barebox-2020.01.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [RFC PATCH 7/7] usb: dwc2: Read dr_mode from device tree
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 1/7] usb: dwc2: Add host controller driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 6/7] usb: dwc2: Rewrite dwc2_hc_init
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 4/7] usb: dwc2: Rework roothub interface
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 3/7] usb: dwc2: Dynamic fifo size support from Linux
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 2/7] usb: dwc2: host: Handle dma mapping errors
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 5/7] HACK: usb: dwc2: Fix toggle reset
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 0/7] usb: dwc2 host driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH] MIPS: dts: rename tplink-mr3020.dts -> ar9331_tl_mr3020.dts
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] usb: ehci: Do not use memset on dma coherent memory
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] serial: cadence: move register definitions into header file
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: zynq: zed: partially revert zynq_cpu_lowlevel_init() chnages
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] PCI: layerscape: rename variable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] PCI: layerscape: Fixup iommu-map properties
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: zynq: zedboard: add PBL console support
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 2/3] serial: cadence: add lowlevel init and putc functions
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 1/3] serial: cadence: move register definitions into header file
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH] ARM: zynq: zed: partially revert zynq_cpu_lowlevel_init() chnages
  • From: Lucas Stach <dev@xxxxxxxxxx>
• Re: [RFC 3/5] net: e1000: make it work on MIPS
  • From: Lucas Stach <dev@xxxxxxxxxx>
• Re: barebox for iMX8MMini crashes while usb_rescan for USB type A
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC 2/5] WIP: MIPS: implement dma mapping functions
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• barebox for iMX8MMini crashes while usb_rescan for USB type A
  • From: "Albert, Elmar" <EAlbert@xxxxxxxxxxxxxx>
• Re: [RFC 3/5] net: e1000: make it work on MIPS
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [RFC 4/5] net: rtl8169: make it work on big-endian system
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [RFC 1/5] WIP: MIPS: configure ebase according CONFIG_MMU
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH 0/5] ARM: Layerscape: Add Fixups for Linux IOMMU support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/5] ARM: Layerscape: replace overcomplicated macros
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/5] ARM: Layerscape: setup icids for the IOMMU
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/5] include/soc/fsl: Make struct ccsr_qman v3 specific
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/5] include/soc/fsl: remove unused function prototypes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/5] net: fsl-fman: Do not put hardware in reset before Linux start
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] images: gitignore more files
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [RFC 5/5] MIPS: qemu-malta_defconfig: enable e1000 network driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 4/5] net: rtl8169: make it work on big-endian system
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 2/5] WIP: MIPS: implement dma mapping functions
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 3/5] net: e1000: make it work on MIPS
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 0/5] WIP: MIPS: implement dma mapping functions
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 1/5] WIP: MIPS: configure ebase according CONFIG_MMU
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] MIPS: dts: rename tplink-mr3020.dts -> ar9331_tl_mr3020.dts
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH] include/linux/amba/bus.h: drop unused declarations
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] esdhc-pbl: allow to skip starting i.MX8 image
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3] habv4: imx change signing area from full to the executed image
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: zynq: add Zynq specific lowlevel CPU init function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 3/5] mci: add first-stage at91-sdhci driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/5] fs: fat: extend for in-PBL support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] include/linux/amba/bus.h: drop unused declarations
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: Watchdog Timer with x86 processor
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Watchdog Timer with x86 processor
  • From: Frederick Gotham <cauldwell.thomas@xxxxxxxxx>
• [PATCH 1/3] esdhc-pbl: allow to skip starting i.MX8 image
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/3] esdhc-pbl: remove now unused imx8_esdhc_load_piggy
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: nxp-imx8mq-evk: fix second stage booting
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: bcm2835 mbox: use pr_* to print messages
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/4] gpio: Add raspberrypi exp gpio driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/4] ARM: bcm2835 mbox: Remove response valid check
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: rpi_defconfig: Enable raspberry GPIO exp driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Why the internal kernel header?
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Why the internal kernel header?
  • From: Frederick Gotham <cauldwell.thomas@xxxxxxxxx>
• [PATCH v3] habv4: imx change signing area from full to the executed image
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH 1/2] ARM: zynq: add Zynq specific lowlevel CPU init function
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 2/2] ARM: zynq: zed: use zynq_cpu_lowlevel_init()
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [RFC PATCH 3/5] mci: add first-stage at91-sdhci driver
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [RFC PATCH 2/5] fs: fat: extend for in-PBL support
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [RFC PATCH 4/5] ARM: at91: add helpers for MCI barebox chain-loading
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [RFC PATCH 1/5] pbl: add block I/O API
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [RFC PATCH 0/5] fs: fat: extend for in-PBL support
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [RFC PATCH 5/5] [WIP] ARM: at91: sama5d27-som1: add first stage entry point
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH v2] habv4: imx change signing area from full to the executed image
  • From: Maik Otto <m.otto@xxxxxxxxx>
• Re: Watchdog Timer with x86 processor
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Watchdog Timer with x86 processor
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Watchdog Timer with x86 processor
  • From: Frederick Gotham <cauldwell.thomas@xxxxxxxxx>
• Re: [PATCH] ARM: nitrogen6: add lowlevel UART initialization
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: nitrogen6: add lowlevel UART initialization
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: loongson: rename CPU_LOONGSON1 to CPU_GS232
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] habv4: imx change signing area from full to the executed image
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: nitrogen6: add lowlevel UART initialization
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: nitrogen6: add lowlevel UART initialization
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH] lds: align RO_DATA_SECTION members
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: STM32MP1 SoC support in latest Barebox
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2] habv4: imx change signing area from full to the executed image
  • From: Marcin Niestrój <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM64: entry: save/restore potentially clobbered registers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 09/10] usb: Add dwc2 host driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM64: entry: save/restore potentially clobbered registers
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM64: entry: save/restore potentially clobbered registers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2] habv4: imx change signing area from full to the executed image
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! ARM: zii-imx8mq-dev: add DT fixups
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: nxp-imx8mq-evk: switch to SPDX license header
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] ARM64 early cache fixes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] lds: align RO_DATA_SECTION members
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] clk: zynq: add QSPI reference clock
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: aarch64: Add support for passing initrd to Linux
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX: Fix PBL size test
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 03/10] device: Introduce dma_offset
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 07/10] rpi: Enable USB Power domain during startup
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 05/10] usb: Add usbroothubdes.h
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 08/10] usb: Forward error code from usb_set_configuration
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 04/10] of: Read dma_offset from device tree
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 00/10] Add Raspberry Pi USB support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 02/10] of: Add of_bus_n_xxx_cells()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 10/10] ARM: rpi_defconfig: Enable networking support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 06/10] regulator: add function to get regulator by its name
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 01/10] usb: Make timeout unit clear
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: nxp-imx8mq-evk: clean up nxp_imx8mq_evk_start
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: nxp-imx8mq-evk: fix bootflow comment
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/4] ARM: nxp-imx8mq-evk: switch the PBL memcpy parameters to common variables
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/4] ARM: nxp-imx8mq-evk: switch to SPDX license header
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] fixup! ARM: zii-imx8mq-dev: add DT fixups
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] driver: add function to look up device by DT node
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] driver: add function to look up device by DT node
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH] driver: add function to look up device by DT node
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: cache_64: invalidate icache in arm_early_mmu_cache_flush
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: cache_64: invalidate dcache in arm_early_mmu_cache_invalidate
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/3] ARM64: entry: save/restore potentially clobbered registers
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 0/3] ARM64 early cache fixes
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v2] lds: align RO_DATA_SECTION members
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• USB type-A in imx8mm
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• [PATCH] ARM: rpi: Do not warn when firmware doesn't pass a dtb
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: zynq: add QSPI DT node
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 2/4] spi: add Zynq QSPI controller driver
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 4/4] ARM: zynq: zed: add QSPI flash support
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 1/4] clk: zynq: add QSPI reference clock
  • From: Lucas Stach <dev@xxxxxxxxxx>
• Re: [PATCH 2/3] ARM: zii-imx8mq-dev: add DT fixups
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] ARM: aarch64: Add support for passing initrd to Linux
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 2/3] ARM: zii-imx8mq-dev: add DT fixups
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: zii-imx8mq-dev: add DT fixups
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 2/3] ARM: zii-imx8mq-dev: add DT fixups
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: zii-imx8mq-dev: add DT fixups
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2] habv4: imx change signing area from full to the executed image
  • From: Maik Otto <m.otto@xxxxxxxxx>
• Re: [PATCH] ARM: rdu1: add default environment
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] RDU2: add support to boot from SD card autonomosly
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: rdu-common: restart machine after fixing i210 device ID
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: zii-imx8mq-dev: make eMMC update target the default
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: rdu1: add default environment
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: rdu2: fixup touchscreen alias
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: rdu2: don't reduce i2c frequency for eGalax touch
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/3] RDU2: add support to boot from SD card autonomosly
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] ARM: rdu-common: restart machine after fixing i210 device ID
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: zii-imx8mq-dev: fixup touchscreen and ethernet switch alias
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/3] ARM: zii-imx8mq-dev: make eMMC update target the default
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: zii-imx8mq-dev: add DT fixups
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: imx-usb-loader on imx8mq/mm
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• [PATCH 2/4] cdev: Add discard_range hook
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/4] add discard_range to improve write speed on block devices
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/4] block: Implement discard_range
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/4] fs: Introduce discard_range()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/4] copy_file: call discard_range on destination file
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [BUG] imx6qdl: degraded eMMC write performance
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: omap: support for WAGO PFC200v3 750-821x
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: omap: support for WAGO PFC200v3 750-821x
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] commands: led: print actual error code when led_set fails
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] led: pca955x: remove ineffectual assignment
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] commands: miitool: handle powerdown-flag
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] habv4: add the possibility to changing the signing area from Kconfig
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: imx-usb-loader on imx8mq/mm
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: imx-usb-loader on imx8mq/mm
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• [PATCH] commands: led: print actual error code when led_set fails
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] led: pca955x: remove ineffectual assignment
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: imx-usb-loader on imx8mq/mm
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• imx-usb-loader on imx8mq/mm
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/7] ARM: dts: imx6: pcaaxl3: Order nodes alphabetically
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: omap: reword MACH_WAGO_PFC_AM35XX kconfig help text
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: omap: support for WAGO PFC200v3 750-821x
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH v3 6/7] ARM: dts: imx6: phycard: Use gpio binding constants
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v3 7/7] ARM: dts: imx6: phytec: Increase NAND barebox partition size
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v3 5/7] ARM: dts: imx6: phycard: Switch to new partitions binding
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v3 4/7] ARM: dts: imx6: phycard: Make eeprom configurable
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v3 3/7] ARM: dts: imx6: pcaaxl3: Make use of the simpler name phycard
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v3 1/7] ARM: dts: imx6: pcaaxl3: Order nodes alphabetically
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v3 2/7] ARM: dts: imx6: pcaaxl3: Update license and model description
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH] commands: miitool: handle powerdown-flag
  • From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
• Re: [PATCH] habv4: add the possibility to changing the signing area from Kconfig
  • From: Maik Otto <m.otto@xxxxxxxxx>
• Re: [PATCH 1/4] ARM: zynq: zedboard: split out PS7 init
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] mci: imx-esdhc: fix termination of statement
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] Allow usage of default environment without environment file storage
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] of: demote most debug output to loglevel 8 (vdebug)
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] commands: digest: don't be to restrictive with the length of verification files
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] led: unify led trigger tables
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] firmware: zynqmp-fpga: drop example bin format header
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: spi-nor: Add support for en25qh64
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] images: i.MX: rearrange image rules in preparation for boilerplate removal
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] habv4: add the possibility to changing the signing area from Kconfig
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] habv4: add the possibility to changing the signing area from Kconfig
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH 3/4] filetype: add Zynq image type
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 1/4] ARM: zynq: zedboard: split out PS7 init
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 2/4] ARM: zynq: zedboard: allow lowlevel init to be called as second stage
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 4/4] ARM: zynq: add Zynq image bootm handler
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH] of: demote most debug output to loglevel 8 (vdebug)
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [BUG] imx6qdl: degraded eMMC write performance
  • From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
• [PATCH] commands: digest: don't be to restrictive with the length of verification files
  • From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
• [PATCH 3/4] led: check for 'barebox, default-trigger' when 'linux, default-trigger' is not found
  • From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
• [PATCH 1/4] led: unify led trigger tables
  • From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
• [PATCH 4/4] led: parse panic-indicator from device-tree
  • From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
• [PATCH 2/4] led: add documentation for net-tx and net-rx triggers
  • From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
• Re: [BUG] imx6qdl: degraded eMMC write performance
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [BUG] imx6qdl: degraded eMMC write performance
  • From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
• Re: [PATCH] habv4: add the possibility to changing the signing area from Kconfig
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [BUG] imx6qdl: degraded eMMC write performance
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] habv4: add the possibility to changing the signing area from Kconfig
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH 1/1] mci: imx-esdhc: fix termination of statement
  • From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
• [BUG] imx6qdl: degraded eMMC write performance
  • From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
• Re: [PATCH v2 5/8] ARM: dts: imx6: phycard: Use partname for environment device-path
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• [PATCH v2] firmware: zynqmp-fpga: drop example bin format header
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• Re: [PATCH] firmware: zynmp-fpga: drop example bin format header
  • From: Thomas Hämmerle <Thomas.Haemmerle@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/8] ARM: dts: imx6: phycard: Use partname for environment device-path
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/8] ARM: dts: imx6: phycard: Use partname for environment device-path
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• Re: [PATCH v2 5/8] ARM: dts: imx6: phycard: Use partname for environment device-path
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/8] ARM: dts: imx6: phycard: Use partname for environment device-path
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• Re: [PATCH v2 5/8] ARM: dts: imx6: phycard: Use partname for environment device-path
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] mtd: spi-nor: Add support for en25qh64
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] images: i.MX: rearrange image rules in preparation for boilerplate removal
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] ARM: i.MX: introduce imx_image_rule variable for code deduplication
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] ARM: i.MX: rebuild .imximg if DCD table in .imxcfg changes
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] firmware: zynmp-fpga: drop example bin format header
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: i.MX: introduce imx_image_rule variable for code deduplication
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: i.MX: introduce imx_image_rule variable for code deduplication
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2 8/8] ARM: dts: imx6: phytec: Increase NAND barebox partition size
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 6/8] ARM: dts: imx6: phycard: Switch to new partitions binding
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 5/8] ARM: dts: imx6: phycard: Use partname for environment device-path
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 7/8] ARM: dts: imx6: phycard: Use gpio binding constants
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 3/8] ARM: dts: imx6: pcaaxl3: Make use of the simpler name phycard
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 1/8] ARM: dts: imx6: pcaaxl3: Order nodes alphabetically
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 4/8] ARM: dts: imx6: phycard: Make eeprom configurable
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 2/8] ARM: dts: imx6: pcaaxl3: Update license and model description
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• Re: [PATCH v2 2/4] image-metadata: add flags field to imd_header
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• v2019.12.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2] Allow usage of default environment without environment file storage
  • From: Albert Schwarzkopf <a.schwarzkopf@xxxxxxxxx>
• Re: [PATCH 2/7] ARM: dts: imx6: pcaaxl3: Update license and model description
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 3/4] imd: add support for checksum generation/verification
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] commands: bbu: add support for imd checksum
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v2 2/4] image-metadata: add flags field to imd_header
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v2 1/4] imd: replace magicvalue with sizeof(struct)
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] bus: efi: add basic ACPI bus infrastructure
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 8/9] pci: add EFI PCI root bridge IO protocol driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/7] ARM: dts: imx6: pcaaxl3: Update license and model description
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH] Revert "mci: core: make mci_register -EPROBE_DEFER sensitive"
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] lds: align RO_DATA_SECTION members
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] Revert "mci: core: make mci_register -EPROBE_DEFER sensitive"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] clk: i.MX6ul: Disable GPMI_IO clk before reparenting
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: spi-nor: fix wrong value for CR_QUAD_EN_SPAN
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] images: i.MX: rearrange image rules in preparation for boilerplate removal
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] lds: align RO_DATA_SECTION members
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 7/7] ARM: dts: imx6: phytec: Increase NAND barebox partition size
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 6/7] ARM: dts: imx6: phycard: Switch to new partitions binding
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 5/7] ARM: dts: imx6: phycard: Use partname for environment device-path
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 4/7] ARM: dts: imx6: phycard: Make eeprom configurable
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 2/7] ARM: dts: imx6: pcaaxl3: Update license and model description
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 1/7] ARM: dts: imx6: pcaaxl3: Order nodes alphabetically
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 3/7] ARM: dts: imx6: pcaaxl3: Make use of the simpler name phycard
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• Re: Writing to ubifs
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] lds: align RO_DATA_SECTION members
  • From: Lucas Stach <dev@xxxxxxxxxx>
• Writing to ubifs
  • From: Patrick Schneider <patrick.schneider@xxxxxxxxxxx>
• Re: [PATCH] README: add section about contributing to barebox
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: use #!/usr/bin/env binary instead of #!/usr/bin/binary
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: boards: phytec-som-imx6: Replace spi by spi-nor in bootsource script
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: imx6qdl: phycore: Remove emmc vmmc-supply
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v3 4/4] docs: use #!/usr/bin/env python shebang instead of #!/usr/bin/python
  • From: Florian Klink <flokli@xxxxxxxxx>
• [PATCH v3 3/4] docs: use #!/usr/bin/env bash shebang instead of #!/bin/bash
  • From: Florian Klink <flokli@xxxxxxxxx>
• [PATCH v3 2/4] dts/scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
  • From: Florian Klink <flokli@xxxxxxxxx>
• use #!/usr/bin/env binary instead of #!/usr/bin/binary
  • From: Florian Klink <flokli@xxxxxxxxx>
• [PATCH v3 1/4] scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
  • From: Florian Klink <flokli@xxxxxxxxx>
• [PATCH] README: add section about contributing to barebox
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH v2 3/4] docs: use #!/usr/bin/env bash shebang instead of #!/bin/bash
  • From: Florian Klink <flokli@xxxxxxxxx>
• [PATCH v2 4/4] docs: use #!/usr/bin/env python shebang instead of #!/usr/bin/python
  • From: Florian Klink <flokli@xxxxxxxxx>
• [PATCH v2 2/4] dts/scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
  • From: Florian Klink <flokli@xxxxxxxxx>
• [PATCH v2 1/4] scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
  • From: Florian Klink <flokli@xxxxxxxxx>
• Re: [PATCH] ARM: dts: imx6qdl: phycore: Remove emmc vmmc-supply
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: imx6qdl: phycore: Remove emmc vmmc-supply
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• Re: [PATCH] ARM: dts: imx6qdl: phycore: Remove emmc vmmc-supply
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] remoteproc: add .stop device parameter for stopping remote processor
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: imx6qdl: phycore: Remove emmc vmmc-supply
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: designware: eqos: remove done TODO
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] images: i.MX: rearrange image rules in preparation for boilerplate removal
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: i.MX: rebuild .imximg if DCD table in .imxcfg changes
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: i.MX: introduce imx_image_rule variable for code deduplication
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] bus: efi: add basic ACPI bus infrastructure
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] bus: efi: add basic ACPI bus infrastructure
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 0/2] bus: efi: add basic ACPI bus infrastructure
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 2/2] misc: add ACPI test driver
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH 3/3] remoteproc: add .stop device parameter for stopping remote processor
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] net: designware: eqos: remove done TODO
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 9/9] serial: add support for PCI NS16550 UARTs
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 8/9] pci: add EFI PCI root bridge IO protocol driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 7/9] efi: turn set of defines into enumerations
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/9] PCI: add driver_data member to struct pci_device_id
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 6/9] PCI: copy over some Linux PCI helpers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/9] efi: add and use new efi_device_has_guid helper
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/9] efi: fix off-by-one in mem_malloc_init(..., end)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/9] driver: add missing parentheses around macro argument
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/9] efi: add PCI controller driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/9] x86: efi: lds: don't discard any relocation sections
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 00/12] Share i.MX ESDHC PBL and PIO code
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 01/39] ARM: imx: add image type choice
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: VFxxx: Display UID information on boot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] HABv4: remove useless error message
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] HABv4: remove useless error message
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: boards: phytec-som-imx6: Replace spi by spi-nor in bootsource script
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• Re: [PATCH 1/2] HABv4: remove useless error message
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] ARM: dts: imx6qdl: phycore: Remove emmc vmmc-supply
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• Re: [PATCH 1/3] scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH 2/2] commands: bbu: add support for imd checksum
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 1/2] imd: add support for checksum generation/verification
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
  • From: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
  • From: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
• [PATCH 12/12] mci: imx-esdhc: Share code for esdhc_send_cmd()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 10/12] mci: imx-esdhc: Share code for esdhc_(setup|do)_data operations
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 11/12] mci: imx-esdhc: Introduce esdhc_poll()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 09/12] mci: imx-esdhc-pbl: Use sdhci_set_cmd_xfer_mode()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 07/12] mci: imx-esdhc-pbl: Share IO accessors with regular driver
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 08/12] mci: imx-esdhc-pbl: Use sdhci_transfer_data()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 06/12] mci: imx-esdhc-pbl: Drop 'wrap_wml' flag
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 05/12] mci: imx-esdhc-pbl: Share initialization code
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 04/12] mci: imx-esdhc-pbl: Don't setup DMA registers
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 03/12] mci: imx-esdhc: Drop extra helper varaible
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 01/12] mci: imx-esdhc: Drop unnecessary type conversion
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 02/12] mci: imx-esdhc: Drop unused type definition
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 00/12] Share i.MX ESDHC PBL and PIO code
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] ARM: VFxxx: Display UID information on boot
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 1/2] HABv4: remove useless error message
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: use /usr/bin/env bash shebang instead of /bin/bash
  • From: Florian Klink <flokli@xxxxxxxxx>
• Re: [PATCH 1/2] HABv4: remove useless error message
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] HABv4: remove useless error message
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] HABv4: remove useless error message
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] HABv4: remove useless error message
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 01/39] ARM: imx: add image type choice
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/2] HABv4: fix ROM code API usage
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH 1/2] HABv4: remove useless error message
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: [PATCH 01/39] ARM: imx: add image type choice
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: fastboot: fix typo
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: macro about loongson's CPU & SoC
  • From: Du Huanpeng <duhuanpeng@xxxxxxxxxxx>
• Re: [PATCH v2] scripts: imx: report file where error occurred
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: use /usr/bin/env bash shebang instead of /bin/bash
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 00/39] randcfg build fixes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] usb: gadget: fastboot: fix typo
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH 08/39] gui: picopng: declare locally used functions as static
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 18/39] i2c: always walk down into i2c/busses Makefile
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 21/39] firmware: zynqmp-fpga: fix comparison between pointer and integer
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 27/39] ARM: ARM_SMCCC is only available on >= ARMv7
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 32/39] ubootvarfs: depend on OFTREE
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 17/39] mci: MCI_IMX_ESDHC_PBL has no dependency on MCI
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 16/39] mfd: da9063: don't try to register gpiochip when GPIOLIB isn't built
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 20/39] pstore: don't try to grab non-existent logbuf
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 33/39] ARM: davinci: virt2real: select OFTREE and OFDEVICE
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 26/39] ARM: PBL break is not available on ARMv4
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 22/39] pstore: ramoops: use correct format specifier for size_t variables
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 34/39] ARM: omap: pfc200: NAND support requires CONFIG_OMAP_GPMC
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 29/39] usb: dwc3: dual role mode needs gadget support
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 35/39] net: designware-eqos: depend on COMMON_CLK
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 28/39] ARM: layerscape: select OFTREE and OFDEVICE
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 31/39] ARM: layerscape: ppa: use sync_for_execution instead of a manual cache flush
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 39/39] pinctrl: at91pio4 depends on OFDEVICE
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 15/39] mtd: nand: don't call BBT functions if BBT support isn't built
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 03/39] ARM: move into ARM32 specific optee kernel start into lib32 dir
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 23/39] clocksource: ARMv8 timer can only be built on ARMv8
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 19/39] usb: usb251xb: depend on OFDEVICE
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 24/39] input: select POLLER
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 30/39] pinctrl: at91pio4: move to correct location in Kconfig
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 37/39] nvme: correct symbol export name for nvme_submit_sync_cmd
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 38/39] pinctrl: tegra: mark drvdata as maybe unused
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 09/39] reset_source: add stub for reset_source_set_device
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 25/39] ARM: layerscape: add missing selects for TQMLS1046A
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 05/39] lib: zstd: declare locally used functions as static
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 01/39] ARM: imx: add image type choice
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 11/39] mfd: superio: add missing semicolon after EXPORT_SYMBOL
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 02/39] ratp: add more build dependencies
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 36/39] ARM: mvebu: correct DTB rule for MARVELL_ARMADA_XP_DB
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 14/39] usb: dwc3: depend on OFDEVICE
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 10/39] spi: fix symbol export for spi_register_controller
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 04/39] ARM: implement CONFIG_PBL_BREAK for ARM64
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 13/39] ARM: mxs: bcb: declare locally used functions as static
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 12/39] ARM: psci: declare locally used functions as static
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 00/39] randcfg build fixes
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 07/39] commands: keystore: use correct type for s_len
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 06/39] common: provide stubs for ctrlc_* functions
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v2] scripts: imx: report file where error occurred
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fixup! scripts: imx: report file where error occurred
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] scripts: imx: report file where error occurred
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: Layerscape: PPA: Disable CAAM JR used by secure firmware
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] net: fsl-fman: Disable unused network interfaces
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• use /usr/bin/env bash shebang instead of /bin/bash
  • From: Florian Klink <flokli@xxxxxxxxx>
• [PATCH 3/3] docs: use #!/usr/bin/env bash shebang instead of #!/bin/bash
  • From: Florian Klink <flokli@xxxxxxxxx>
• [PATCH 2/3] dts/scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
  • From: Florian Klink <flokli@xxxxxxxxx>
• [PATCH 1/3] scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
  • From: Florian Klink <flokli@xxxxxxxxx>
• Re: [PATCH] MIPS: Makefile: minor codingstyle fix
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: macro about loongson's CPU & SoC
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] pstore: fix build by re-resolving botched merge conflict
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] of/gpio: Support gpio-line-names property
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] of/gpio: Support gpio-line-names property
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] of/gpio: Support gpio-line-names property
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM64: Switch to 4 level page tables
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] of/gpio: Support gpio-line-names property
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/6] ARM Layerscape: ls1046ardb: Fix SPI NOR flash compatibles
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: Layerscape: TQMLS1046a: Fix partition name
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 6/6] ARM Layerscape: ls1046ardb: read nxid eeprom
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/6] Layerscape ls1046ardb update
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/6] ARM Layerscape: ls1046ardb: Add barebox update handler
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>