Hi Enrico, thank you very much for your help. I'm using barebox_2019.01.0-phy4-r7.0 now. In thud I used barebox_2017.12.0 The image is built using my own ims layer which depends on core-image-minimal LAYERDEPENDS_ims-layer = "core-image-minimal openembedded-layer phytec-layer" Its using the meta-phytec Layer and a custom layer from phytec named meta-ksp0663. Forgot to mention that rauc is used too, which moved from 1.1 to now 1.2. Just changed the LAYERSERIES_COMPAT to "zeus" here to check whether yocto zeus works. Is there some info what to change in the devicetree and so on when moving to warrior/zeus? In thud this worked. Thank you Regards hu > -----Original Message----- > From: Enrico Joerns <ejo@xxxxxxxxxxxxxx> > Sent: Wednesday, 15 January 2020 14:03 > To: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>; yocto@xxxxxxxxxxxxxxxxxxxxxx > Cc: barebox@xxxxxxxxxxxxxxxxxxx > Subject: Re: [yocto] #yocto bootchooser: Cannot get state 'state' > > Hi, > > this is mainly a barebox-related question, thus I'd suggest asking it on the barebox ML. > > [cc-ing barebox mailing list] > > On Wed, 2020-01-15 at 04:10 -0800, hu.schlieben@xxxxxxxxxxxxxx wrote: > > Hi, > > > > booting the new yocto zeus system manually by "boot mmc" works fine > > but default bootchooser fails with: > > > > bootchooser: Cannot get state 'state' > > Nothing bootable found on 'bootchooser' > > Nothing bootable found > > Looks like the state node is missing in your device tree. > Which version of barebox do you use? > And from which layer / recipe? > > > Building the "same" image in yocto thud works fine. The boot variables > > are: > > > > * BOOT_system0_.default: 3 > > * BOOT_system1_.default: 3 > > * allow_color: 0 > > * autoboot_timeout: 3 > > * boot.default: bootchooser > > boot.watchdog_timeout: 0 > > bootchooser.default_attempts: 3 > > bootchooser.default_priority: 1 > > bootchooser.disable_on_zero_attempts: 0 > > bootchooser.reset_attempts: (list: "power-on", "all-zero") > > bootchooser.reset_priorities: > > bootchooser.retry: 0 > > * bootchooser.state_prefix: state.bootstate > > * bootchooser.system0.boot: mmc > > * bootchooser.system0.default_attempts: 3 > > * bootchooser.system0.default_priority: 20 > > * bootchooser.system1.boot: mmc1 > > * bootchooser.system1.default_attempts: 3 > > * bootchooser.system1.default_priority: 21 > > * bootchooser.targets: system0 system1 > > bootm.appendroot: 0 > > ... > > > > Regards, Enrico _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
