On 1/15/20 2:26 PM, Hans-Ulrich Schlieben wrote: > Hi Enrico, > > thank you very much for your help. > I'm using barebox_2019.01.0-phy4-r7.0 now. In thud I used barebox_2017.12.0 > The image is built using my own ims layer which depends on core-image-minimal > LAYERDEPENDS_ims-layer = "core-image-minimal openembedded-layer phytec-layer" > Its using the meta-phytec Layer and a custom layer from phytec named meta-ksp0663. > Forgot to mention that rauc is used too, which moved from 1.1 to now 1.2. > Just changed the LAYERSERIES_COMPAT to "zeus" here to check whether yocto zeus works. > > Is there some info what to change in the devicetree and so on when moving to warrior/zeus? > In thud this worked. Are there any other error messages? Can you copy the device tree snippet you use for defining state? What does running the state command say? (now again, but with CC-list intact) > > Thank you > Regards > > hu > >> -----Original Message----- >> From: Enrico Joerns <ejo@xxxxxxxxxxxxxx> >> Sent: Wednesday, 15 January 2020 14:03 >> To: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>; yocto@xxxxxxxxxxxxxxxxxxxxxx >> Cc: barebox@xxxxxxxxxxxxxxxxxxx >> Subject: Re: [yocto] #yocto bootchooser: Cannot get state 'state' >> >> Hi, >> >> this is mainly a barebox-related question, thus I'd suggest asking it on the barebox ML. >> >> [cc-ing barebox mailing list] >> >> On Wed, 2020-01-15 at 04:10 -0800, hu.schlieben@xxxxxxxxxxxxxx wrote: >>> Hi, >>> >>> booting the new yocto zeus system manually by "boot mmc" works fine >>> but default bootchooser fails with: >>> >>> bootchooser: Cannot get state 'state' >>> Nothing bootable found on 'bootchooser' >>> Nothing bootable found >> >> Looks like the state node is missing in your device tree. >> Which version of barebox do you use? >> And from which layer / recipe? >> >>> Building the "same" image in yocto thud works fine. The boot variables >>> are: >>> >>> * BOOT_system0_.default: 3 >>> * BOOT_system1_.default: 3 >>> * allow_color: 0 >>> * autoboot_timeout: 3 >>> * boot.default: bootchooser >>> boot.watchdog_timeout: 0 >>> bootchooser.default_attempts: 3 >>> bootchooser.default_priority: 1 >>> bootchooser.disable_on_zero_attempts: 0 >>> bootchooser.reset_attempts: (list: "power-on", "all-zero") >>> bootchooser.reset_priorities: >>> bootchooser.retry: 0 >>> * bootchooser.state_prefix: state.bootstate >>> * bootchooser.system0.boot: mmc >>> * bootchooser.system0.default_attempts: 3 >>> * bootchooser.system0.default_priority: 20 >>> * bootchooser.system1.boot: mmc1 >>> * bootchooser.system1.default_attempts: 3 >>> * bootchooser.system1.default_priority: 21 >>> * bootchooser.targets: system0 system1 >>> bootm.appendroot: 0 >>> ... >>> >> >> Regards, Enrico > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Steuerwalder Str. 21 | https://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
