Hi, this is mainly a barebox-related question, thus I'd suggest asking it on the barebox ML. [cc-ing barebox mailing list] On Wed, 2020-01-15 at 04:10 -0800, hu.schlieben@xxxxxxxxxxxxxx wrote: > Hi, > > booting the new yocto zeus system manually by "boot mmc" works fine > but default bootchooser fails with: > > bootchooser: Cannot get state 'state' > Nothing bootable found on 'bootchooser' > Nothing bootable found Looks like the state node is missing in your device tree. Which version of barebox do you use? And from which layer / recipe? > Building the "same" image in yocto thud works fine. The boot > variables are: > > * BOOT_system0_.default: 3 > * BOOT_system1_.default: 3 > * allow_color: 0 > * autoboot_timeout: 3 > * boot.default: bootchooser > boot.watchdog_timeout: 0 > bootchooser.default_attempts: 3 > bootchooser.default_priority: 1 > bootchooser.disable_on_zero_attempts: 0 > bootchooser.reset_attempts: (list: "power-on", "all-zero") > bootchooser.reset_priorities: > bootchooser.retry: 0 > * bootchooser.state_prefix: state.bootstate > * bootchooser.system0.boot: mmc > * bootchooser.system0.default_attempts: 3 > * bootchooser.system0.default_priority: 20 > * bootchooser.system1.boot: mmc1 > * bootchooser.system1.default_attempts: 3 > * bootchooser.system1.default_priority: 21 > * bootchooser.targets: system0 system1 > bootm.appendroot: 0 > ... > Regards, Enrico _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
