Hi Oleksij,
Below you will find the patch, which adds the `whereami` command. The command
prints several addresses belonging to code, data, bss, heap and stack areas.
I've run it on qemu/malta with relocations enabled and disabled as per Antony's
mail. Output comparison shows that only the stack is relocated. Looks like
relocation doesn't work as expected. Also note that the stack was relocated
from the uncached KSEG1 to the cached KSEG0 segment, which is inconsistent at
least.
Relocation enabled:
barebox@qemu malta:/ whereami
code @ a0829bcc (a0829bc0)
data @ a085f3c0
bss @ a0861ae0
heap @ a0428c38
stack @ 8fb8fd50
barebox@qemu malta:/ version
barebox 2020.01.0-00104-gfe12ba2776 #3 Tue Jan 28 13:34:06 MSK 2020
Relocation disabled:
barebox@qemu malta:/ whereami
code @ a0829bcc (a0829bc0)
data @ a085f1e0
bss @ a0861900
heap @ a0428c38
stack @ a03ffd50
Regards,
Peter
---
commands/Kconfig | 5 +++++
commands/Makefile | 1 +
commands/whereami.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 51 insertions(+)
create mode 100644 commands/whereami.c
diff --git a/commands/Kconfig b/commands/Kconfig
index add0d26ee9..a660e09db4 100644
--- a/commands/Kconfig
+++ b/commands/Kconfig
@@ -2217,6 +2217,11 @@ config CMD_UBSAN
This is a test command for the undefined behavior sanitizer.
It triggers various undefined behavior, and detect it.
+config CMD_WHEREAMI
+ tristate "whereami"
+ depends on MIPS
+ default y
+
# end Miscellaneous commands
endmenu
diff --git a/commands/Makefile b/commands/Makefile
index 8e8c449bc1..dfa3d6e447 100644
--- a/commands/Makefile
+++ b/commands/Makefile
@@ -128,6 +128,7 @@ obj-$(CONFIG_CMD_NAND_BITFLIP) += nand-bitflip.o
obj-$(CONFIG_CMD_SEED) += seed.o
obj-$(CONFIG_CMD_IP_ROUTE_GET) += ip-route-get.o
obj-$(CONFIG_CMD_UBSAN) += ubsan.o
+obj-$(CONFIG_CMD_WHEREAMI) += whereami.o
UBSAN_SANITIZE_ubsan.o := y
diff --git a/commands/whereami.c b/commands/whereami.c
new file mode 100644
index 0000000000..3edb070fe8
--- /dev/null
+++ b/commands/whereami.c
@@ -0,0 +1,45 @@
+#include <common.h>
+#include <command.h>
+#include <complete.h>
+
+static volatile int data = 1;
+static volatile int bss;
+
+static void* code();
+static noinline void* code()
+{
+ void *ret;
+ __asm__ __volatile__(
+ ".set push\n"
+ ".set noreorder\n"
+ ".set noat\n"
+ " move $1, $31\n"
+ " bal 255f\n"
+ " nop\n"
+ "255: move %0, $31\n"
+ " move $31, $1\n"
+ ".set pop\n"
+ :"=r" (ret)
+ );
+ return ret;
+}
+
+static int do_whereami(int argc, char *argv[])
+{
+ volatile int stack;
+ int *heapp = malloc(sizeof(int));
+
+ printf("code @ %p (%p)\n", code(), &code);
+ printf("data @ %p\n", &data);
+ printf("bss @ %p\n", &bss);
+ printf("heap @ %p\n", heapp);
+ printf("stack @ %p\n", &stack);
+ return 0;
+}
+
+BAREBOX_CMD_START(whereami)
+ .cmd = do_whereami,
+ BAREBOX_CMD_DESC("print addresses from code, stack, heap and data sections")
+ BAREBOX_CMD_GROUP(CMD_GRP_INFO)
+ BAREBOX_CMD_COMPLETE(empty_complete)
+BAREBOX_CMD_END
--
2.24.0
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
