Hi All,
I just released barebox-2020.02.0. Nicest thing to note this time is
that we finally have USB support on the Raspberry Pi boards and with
it networking support, hurray ;)
See below for the usual flow of patches that went into this release.
Haev Fun!
Sascha
----------------------------------------------------------------
Ahmad Fatoum (16):
ARM: i.MX: introduce imx_image_rule variable for code deduplication
ARM: i.MX: rebuild .imximg if DCD table in .imxcfg changes
led: pca955x: remove ineffectual assignment
commands: led: print actual error code when led_set fails
ARM: cache_64: invalidate dcache in arm_early_mmu_cache_invalidate
ARM: cache_64: invalidate icache in arm_early_mmu_cache_flush
Revert "clocksource: ARMv8 timer can only be built on ARMv8"
net: designware: eqos: don't funnel all MDIO writes to register 0
mci: stm32_sdmmc2: use correct card power cycle sequence
mci: stm32_sdmmc2: don't reset before retrying failed operations
mci: core: don't test 4-bit-buswidth support if MMC host lacks capability
mci: stm32_sdmmc2: compare ios ->bus_width with correct constants
mci: stm32_sdmmc2: fix typo in debug string
acpi: include missing header in <acpi.h>
hw_random: add support for STM32 RNG
serial: ns16550_pci: fix possible read of uninitialized variable
Albert Schwarzkopf (1):
Allow usage of default environment without environment file storage
Andrey Smirnov (1):
ARM: aarch64: Add support for passing initrd to Linux
Antony Pavlov (4):
include/linux/amba/bus.h: drop unused declarations
MIPS: dts: rename tplink-mr3020.dts -> ar9331_tl_mr3020.dts
MIPS: actually use CONFIG_MIPS_RELOCATION_TABLE_SIZE
RISC-V: unbreak built-in dtb
Christian Eggers (1):
doc: bootchooser: Fix barebox-state example
Du Huanpeng (1):
MIPS: loongson: rename CPU_LOONGSON1 to CPU_GS232
Hubert Feurstein (7):
led: unify led trigger tables
led: add documentation for net-tx and net-rx triggers
led: check for 'barebox, default-trigger' when 'linux, default-trigger' is not found
led: parse panic-indicator from device-tree
commands: digest: don't be to restrictive with the length of verification files
mci: imx-esdhc: fix termination of statement
commands: miitool: handle powerdown-flag
Lucas Stach (31):
ARM: zynq: zedboard: split out PS7 init
ARM: zynq: zedboard: allow lowlevel init to be called as second stage
filetype: add Zynq image type
ARM: zynq: add Zynq image bootm handler
ARM: zii-imx8mq-dev: make eMMC update target the default
clk: zynq: add QSPI reference clock
spi: add Zynq QSPI controller driver
ARM: zynq: add QSPI DT node
ARM: zynq: zed: add QSPI flash support
ARM64: entry: save/restore potentially clobbered registers
ARM: zii-imx8mq-dev: add DT fixups
ARM: zii-imx8mq-dev: fixup touchscreen and ethernet switch alias
ARM: rdu-common: restart machine after fixing i210 device ID
ARM: rdu2: don't reduce i2c frequency for eGalax touch
ARM: rdu2: fixup touchscreen alias
ARM: rdu1: add default environment
ARM: nxp-imx8mq-evk: switch to SPDX license header
ARM: nxp-imx8mq-evk: switch the PBL memcpy parameters to common variables
ARM: nxp-imx8mq-evk: clean up nxp_imx8mq_evk_start
ARM: nxp-imx8mq-evk: fix bootflow comment
ARM: zynq: add Zynq specific lowlevel CPU init function
ARM: zynq: zed: use zynq_cpu_lowlevel_init()
esdhc-pbl: allow to skip starting i.MX8 image
ARM: nxp-imx8mq-evk: fix second stage booting
esdhc-pbl: remove now unused imx8_esdhc_load_piggy
ARM: zynq: zed: partially revert zynq_cpu_lowlevel_init() chnages
serial: cadence: move register definitions into header file
serial: cadence: add lowlevel init and putc functions
ARM: zynq: zedboard: add PBL console support
ARM: qemu-virt64: convert to assembly entry
ARM: imx6: properly check for IPU presence
Maik Otto (1):
habv4: imx change signing area from full to the executed image
Michael Tretter (1):
firmware: zynqmp-fpga: drop example bin format header
Oleksij Rempel (1):
MIPS: don't overlay relocation data with BSS
Roland Hieber (1):
of: demote most debug output to loglevel 8 (vdebug)
Ruslan V. Sushko (1):
RDU2: add support to boot from SD card autonomously
Sascha Hauer (39):
dts: update to v5.4
dts: update to v5.5-rc1
dts: update to v5.5-rc2
ARM: rpi: Do not warn when firmware doesn't pass a dtb
usb: Make timeout unit clear
of: Add of_bus_n_xxx_cells()
device: Introduce dma_offset
of: Read dma_offset from device tree
usb: Add usbroothubdes.h
regulator: add function to get regulator by its name
rpi: Enable USB Power domain during startup
usb: Forward error code from usb_set_configuration
usb: Add dwc2 host driver
dts: update to v5.5-rc3
ARM: bcm2835 mbox: Remove response valid check
gpio: Add raspberrypi exp gpio driver
ARM: bcm2835 mbox: use pr_* to print messages
ARM: rpi_defconfig: Enable raspberry GPIO exp driver
ARM: rpi mailbox: Use non interruptible timeout
ARM: rpi_defconfig: Enable more features
images: gitignore more files
ARM: Layerscape: replace overcomplicated macros
include/soc/fsl: remove unused function prototypes
include/soc/fsl: Make struct ccsr_qman v3 specific
net: fsl-fman: Do not put hardware in reset before Linux start
ARM: Layerscape: setup icids for the IOMMU
PCI: layerscape: rename variable
PCI: layerscape: Fixup iommu-map properties
dts: update to v5.5-rc5
dts: update to v5.5-rc6
Merge branch 'for-next/arm'
Merge branch 'for-next/dts'
Merge branch 'for-next/imx'
Merge branch 'for-next/layerscape'
Merge branch 'for-next/led'
Merge branch 'for-next/misc'
Merge branch 'for-next/rpi'
Merge branch 'for-next/zynq'
Release v2020.02.0
Stefan Riedmueller (7):
ARM: dts: imx6: pcaaxl3: Order nodes alphabetically
ARM: dts: imx6: pcaaxl3: Update license and model description
ARM: dts: imx6: pcaaxl3: Make use of the simpler name phycard
ARM: dts: imx6: phycard: Make eeprom configurable
ARM: dts: imx6: phycard: Switch to new partitions binding
ARM: dts: imx6: phycard: Use gpio binding constants
ARM: dts: imx6: phytec: Increase NAND barebox partition size
Ulrich Ölmann (1):
mtd: spi-nor: Add support for en25qh64
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
