Add a OP-TEE early loading function which expects a pointer to a valid
tee binary and the device tree. OP-TEE will then be started and barebox
will continue to run in normal mode.
The function start_optee_early should be used in a boards lowlevel.c
file. Ensure that barebox has been relocated and a proper c environment
has been setup beforehand. Depending on the OP-TEE configuration, the
fdt will be modified. If the internal barebox device tree is passed,
OP-TEE will overwrite barebox PBL memory during this modification. Copy
the fdt to a save memory location beforehand to avoid a corruption of
barebox PBL memory.
This also moves the OP-TEE Kconfig symbols into a separate menu.
Signed-off-by: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
---
arch/arm/lib32/Makefile | 2 ++
arch/arm/lib32/optee-early.c | 38 ++++++++++++++++++++
common/Kconfig | 54 ++++++++++++++++++-----------
common/Makefile | 1 +
include/asm-generic/memory_layout.h | 4 +--
include/tee/optee.h | 6 ++++
6 files changed, 82 insertions(+), 23 deletions(-)
create mode 100644 arch/arm/lib32/optee-early.c
diff --git a/arch/arm/lib32/Makefile b/arch/arm/lib32/Makefile
index cfcf3bc8f1..597bc07905 100644
--- a/arch/arm/lib32/Makefile
+++ b/arch/arm/lib32/Makefile
@@ -30,3 +30,5 @@ pbl-y += ashldi3.o
pbl-y += div0.o
obj-pbl-y += setjmp.o
+
+pbl-$(CONFIG_PBL_OPTEE) += optee-early.o
diff --git a/arch/arm/lib32/optee-early.c b/arch/arm/lib32/optee-early.c
new file mode 100644
index 0000000000..197325b8a0
--- /dev/null
+++ b/arch/arm/lib32/optee-early.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * optee-early.c - start OP-TEE during PBL
+ *
+ * Copyright (c) 2019 Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>, Pengutronix
+ *
+ */
+#include <asm/cache.h>
+#include <asm/setjmp.h>
+#include <tee/optee.h>
+#include <debug_ll.h>
+
+static jmp_buf tee_buf;
+
+int start_optee_early(void *fdt, void *tee)
+{
+ void (*tee_start)(void *r0, void *r1, void *r2);
+ struct optee_header *hdr;
+ int ret;
+
+ hdr = tee;
+ ret = optee_verify_header(hdr);
+ if (ret < 0)
+ return ret;
+
+ memcpy((void *)hdr->init_load_addr_lo, tee + sizeof(*hdr), hdr->init_size);
+ tee_start = (void *) hdr->init_load_addr_lo;
+
+ /* We use setjmp/longjmp here because OP-TEE clobbers most registers */
+ ret = setjmp(tee_buf);
+ if (ret == 0) {
+ sync_caches_for_execution();
+ tee_start(0, 0, fdt);
+ longjmp(tee_buf, 1);
+ }
+
+ return 0;
+}
diff --git a/common/Kconfig b/common/Kconfig
index 60237d3056..25587d1927 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -643,27 +643,6 @@ config BOOTM_FORCE_SIGNED_IMAGES
are refused to boot. Effectively this means only FIT images can be booted
since they are the only supported image type that support signing.
-config BOOTM_OPTEE
- bool
- prompt "support booting OP-TEE"
- depends on BOOTM && ARM
- help
- OP-TEE is a trusted execution environment (TEE). With this option
- enabled barebox supports starting optee_os as part of the bootm command.
- Instead of the kernel bootm starts the optee_os binary which then starts
- the kernel in nonsecure mode. Pass the optee_os binary with the -t option
- or in the global.bootm.tee variable.
-
-config BOOTM_OPTEE_SIZE
- hex
- default 0x02000000
- prompt "OP-TEE Memory Size"
- depends on BOOTM_OPTEE
- help
- Size to reserve in main memory for OP-TEE.
- Can be smaller than the actual size used by OP-TEE, this is used to prevent
- barebox from allocating memory in this area.
-
config BLSPEC
depends on FLEXIBLE_BOOTARGS
depends on !SHELL_NONE
@@ -1000,6 +979,39 @@ config MACHINE_ID
Note: if no hashable information is available no machine id will be passed
to the kernel.
+menu "OP-TEE loading"
+
+config OPTEE_SIZE
+ hex
+ default 0x02000000
+ prompt "OP-TEE Memory Size"
+ depends on BOOTM_OPTEE || PBL_OPTEE
+ help
+ Size to reserve in main memory for OP-TEE.
+ Can be smaller than the actual size used by OP-TEE, this is used to prevent
+ barebox from allocating memory in this area.
+
+config BOOTM_OPTEE
+ bool
+ prompt "support booting OP-TEE"
+ depends on BOOTM && ARM
+ help
+ OP-TEE is a trusted execution environment (TEE). With this option
+ enabled barebox supports starting optee_os as part of the bootm command.
+ Instead of the kernel bootm starts the optee_os binary which then starts
+ the kernel in nonsecure mode. Pass the optee_os binary with the -t option
+ or in the global.bootm.tee variable.
+
+config PBL_OPTEE
+ bool "Enable OP-TEE early start"
+ depends on ARM
+ depends on !THUMB2_BAREBOX
+ help
+ Allows starting OP-TEE during lowlevel initialization of the PBL.
+ Requires explicit support in the boards lowlevel file.
+
+endmenu
+
endmenu
menu "Debugging"
diff --git a/common/Makefile b/common/Makefile
index fbdd74a9fd..8312e88572 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_BAREBOX_UPDATE_IMX_NAND_FCB) += imx-bbu-nand-fcb.o
obj-$(CONFIG_BOOT) += boot.o
obj-$(CONFIG_SERIAL_DEV_BUS) += serdev.o
obj-$(CONFIG_USBGADGET_START) += usbgadget.o
+pbl-$(CONFIG_PBL_OPTEE) += optee.o
obj-$(CONFIG_BOOTM_OPTEE) += optee.o
ifdef CONFIG_PASSWORD
diff --git a/include/asm-generic/memory_layout.h b/include/asm-generic/memory_layout.h
index 3f69664aa0..0d7ce3fe02 100644
--- a/include/asm-generic/memory_layout.h
+++ b/include/asm-generic/memory_layout.h
@@ -11,8 +11,8 @@
#define MALLOC_BASE CONFIG_MALLOC_BASE
#endif
-#ifdef CONFIG_BOOTM_OPTEE_SIZE
-#define OPTEE_SIZE CONFIG_BOOTM_OPTEE_SIZE
+#ifdef CONFIG_OPTEE_SIZE
+#define OPTEE_SIZE CONFIG_OPTEE_SIZE
#else
#define OPTEE_SIZE 0
#endif
diff --git a/include/tee/optee.h b/include/tee/optee.h
index 9fb27fcec0..fa124236ba 100644
--- a/include/tee/optee.h
+++ b/include/tee/optee.h
@@ -32,4 +32,10 @@ struct optee_header {
int optee_verify_header (struct optee_header *hdr);
+#ifdef __PBL__
+
+int start_optee_early(void* fdt, void* tee);
+
+#endif /* __PBL__ */
+
#endif /* _OPTEE_H */
--
2.25.0
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
