Hi All,
We have the first release in this decade ;)
>From the amount of patches it seems most of the work for this release
has gone into the SDHCI driver. A good bunch of the different implementations
for the same functionalities has been merged to a common code base.
Other than that Layerscape now has PCIe support, there are some more
Layerscape improvements as well.
As usual, see below for more details about the changes in this release.
Have Fun!
Sascha
----------------------------------------------------------------
Ahmad Fatoum (42):
ARM: i.MX6: Embedsky E9: remove inaccurate comment
ARM: i.MX6: sabresd: remove inaccurate comment
watchdog: always populate watchdog priority from device tree if possible
watchdog: implement generic support for .running device parameter
watchdog: imxwd: support .running device parameter on i.MX2+
watchdog: f71808e: support .running device parameter
ARM: dts: stm32mp: move alias to SoC device tree
ARM: stm32mp157c-dk2: add optional DEBUG_LL print to entry point
mfd: stpmic1: use register define from header
watchdog: stm32_iwdg: return -ENOSYS on attempt to disable
i2c: stm32: use device_reset_us helper instead of open-coding
Documentation: boards: stm32mp: document boot error LED
ARM: stm32mp: add helper for querying ram size
ARM: stm32mp: add basic DDR controller driver
ARM: stm32mp: add stm32mp_cpu_lowlevel_init with stack set up
ARM: stm32mp: dk2: don't hard-code memory size
nvmem: bsec: fix typo in function name (s/st32/stm32/)
ARM: psci: factor out smc command into commands/
ARM: psci: properly wire in command help
commands: psci: make locally-used function static
commands: smc: verify PSCI_POWER_ON with interprocessor handshake
commands: smc: make command usable when ARM_PSCI is undefined
mci: dove: fix dereference of nullable pointer
ARM: cpu: dtb: remove unused declaration
remoteproc: register a device for new remoteproc instances
remoteproc: add support for starting st,stm32mp1-m4
watchdog: stm32_iwdg: explicitly set .running to UNSUPPORTED
scripts: imx: report file where error occurred
net: designware: eqos: remove done TODO
param: add dev_add_param_tristate(_ro) helpers
watchdog: core: use new dev_add_param_tristate helper for .running param
images: i.MX: rearrange image rules in preparation for boilerplate removal
efi: add and use new efi_device_has_guid helper
driver: add missing parentheses around macro argument
efi: fix off-by-one in mem_malloc_init(..., end)
x86: efi: lds: don't discard any relocation sections
PCI: add driver_data member to struct pci_device_id
PCI: copy over some Linux PCI helpers
efi: turn set of defines into enumerations
serial: add support for PCI NS16550 UARTs
bus: efi: add basic ACPI bus infrastructure
misc: add ACPI test driver
Andrey Smirnov (13):
ARM: VFxxx: Display UID information on boot
mci: imx-esdhc: Drop unnecessary type conversion
mci: imx-esdhc: Drop unused type definition
mci: imx-esdhc: Drop extra helper varaible
mci: imx-esdhc-pbl: Don't setup DMA registers
mci: imx-esdhc-pbl: Share initialization code
mci: imx-esdhc-pbl: Drop 'wrap_wml' flag
mci: imx-esdhc-pbl: Share IO accessors with regular driver
mci: imx-esdhc-pbl: Use sdhci_transfer_data()
mci: imx-esdhc-pbl: Use sdhci_set_cmd_xfer_mode()
mci: imx-esdhc: Share code for esdhc_(setup|do)_data operations
mci: imx-esdhc: Introduce esdhc_poll()
mci: imx-esdhc: Share code for esdhc_send_cmd()
Antony Pavlov (1):
i2c: gpio: use of_get_named_gpio() instead of of_get_named_gpio_flags()
Clement Leger (1):
mtd: spi-nor: Add support for is25lp01g
Du Huanpeng (1):
MIPS: Makefile: minor codingstyle fix
Florian Klink (4):
scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
dts/scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
docs: use #!/usr/bin/env bash shebang instead of #!/bin/bash
docs: use #!/usr/bin/env python shebang instead of #!/usr/bin/python
Lucas Stach (58):
ARM: zynq: zedboard: enable MACB driver in defconfig
ARM: zynq: add trivial image build mechanism
ARM: zynq: use getopt in zynq_mkimage
ARM: zynq: move header generation to zynq_mkimage
ARM: zynq: add size check in zynq_mkimage
ARM: zynq: zedboard: provide DTB
net: macb: handle more clocks
net: macb: add Zynq compatible
ARM: zynq: move clock controller driver to drivers/clk
clk: zynq: use base address of clock controller
clk: zynq: improve PLL enable handling
clk: zynq: fix up address from DT
clk: zynq: partially sync with Linux
ARM: zynq: switch to DT based probing
clk: zynq: remove clkdevs
ARM: zynq: switch to multi-image build
bootsource: add JTAG bootsource
ARM: zynq: add bootsource detection
ARM: start: check for machine type last
ratp: add more build dependencies
ARM: move into ARM32 specific optee kernel start into lib32 dir
ARM: implement CONFIG_PBL_BREAK for ARM64
lib: zstd: declare locally used functions as static
common: provide stubs for ctrlc_* functions
commands: keystore: use correct type for s_len
gui: picopng: declare locally used functions as static
reset_source: add stub for reset_source_set_device
spi: fix symbol export for spi_register_controller
mfd: superio: add missing semicolon after EXPORT_SYMBOL
ARM: psci: declare locally used functions as static
ARM: mxs: bcb: declare locally used functions as static
usb: dwc3: depend on OFDEVICE
mtd: nand: don't call BBT functions if BBT support isn't built
mfd: da9063: don't try to register gpiochip when GPIOLIB isn't built
mci: MCI_IMX_ESDHC_PBL has no dependency on MCI
i2c: always walk down into i2c/busses Makefile
usb: usb251xb: depend on OFDEVICE
pstore: don't try to grab non-existent logbuf
firmware: zynqmp-fpga: fix comparison between pointer and integer
pstore: ramoops: use correct format specifier for size_t variables
clocksource: ARMv8 timer can only be built on ARMv8
input: select POLLER
ARM: layerscape: add missing selects for TQMLS1046A
ARM: PBL break is not available on ARMv4
ARM: ARM_SMCCC is only available on >= ARMv7
ARM: layerscape: select OFTREE and OFDEVICE
usb: dwc3: dual role mode needs gadget support
pinctrl: at91pio4: move to correct location in Kconfig
ARM: layerscape: ppa: use sync_for_execution instead of a manual cache flush
ubootvarfs: depend on OFTREE
ARM: davinci: virt2real: select OFTREE and OFDEVICE
ARM: omap: pfc200: NAND support requires CONFIG_OMAP_GPMC
net: designware-eqos: depend on COMMON_CLK
ARM: mvebu: correct DTB rule for MARVELL_ARMADA_XP_DB
nvme: correct symbol export name for nvme_submit_sync_cmd
pinctrl: tegra: mark drvdata as maybe unused
pinctrl: at91pio4 depends on OFDEVICE
lds: align RO_DATA_SECTION members
Maik Otto (5):
i.mx6: signed boot: add habv4-imx6-gencsf.h to the flash header of the PHYTEC boards
imx6: added fit image signature to the devicetree for PHYTEC boards
Kconfig: add selection for creation of signed/encrypted HABV4 images
Makefile.imx: add build_imx_habv4img for creation of signed/encrypted images
Makefile.imx: change image creation to build_imx_habv4img for i.MX6
Michael Tretter (2):
ARM: zynqmp: defconfig: fix FIRMWARE_ZYNQMP_FPGA
ARM: zynqmp: defconfig: reenable DRIVER_NET_MACB
Oleksij Rempel (1):
MIPS: ath79: art: fix typo in SPDX-License-Identifier
Roland Hieber (2):
usb: gadget: fastboot: fix typo
README: add section about contributing to barebox
Sascha Hauer (77):
ARM: Compile with -fPIE
dts: update to v5.4-rc7
net: fsl-fman: reset device before leaving
net: fsl-fman: Store index for txbd
net: fsl-fman: move status read into loop
net: fsl-fman: Store index for rxbd
net: fsl-fman: simplify setting next offset
net: fsl-fman: do not leave not transmitted DMA buffers mapped
mci: Add sdhci helper
mci: sdhci: Add missing command type defines
mci: imx-esdhc: use sdhci helpers
mci: bcm2835: use sdhci helpers
mci: tegra: use sdhci helpers
mci: dove: use sdhci helpers
mci: imx-esdhc: Use 16bit register definitions
mci: mci-bcm2835: Use 16bit register definitions
mci: tegra: Use 16bit register definitions
mci: imx-esdhc-pbl: Use 16bit register definitions
mci: sdhci: remove 32bit register defines
mci: sdhci: remove duplicate transfer mode register defines
mci: sdhci: remove duplicate register defines for interrupt bits
mci: sdhci: remove duplicate register defines for prsstat bits
mci: dove: Use sdhci_set_cmd_xfer_mode()
mci: imx-esdhc: Use sdhci_set_cmd_xfer_mode()
mci: bcm2835: Use sdhci_set_cmd_xfer_mode()
mci: tegra: Use sdhci_set_cmd_xfer_mode()
mci: imx-esdhci: Use generic PIO transfer function
mci: mci-bcm2835: Use generic PIO transfer function
usb: dwc3: remove unnecessary warning
usb: Add function to register otg dev
usb: dwc3: register otg device
usb: i.MX: Use usb_register_otg_device()
usb: musb: use usb_register_otg_device()
of: Add of_property_read_string_array()
gpio: Introduce GPIO names
of/gpio: Support gpio-line-names property
ARM: Layerscape: TQMLS1046a: Add gpio-line-names
PCI: dwc: Don't hard-code DBI/ATU offset
PCI: dwc: Make use of IS_ALIGNED()
PCI: dwc: Add dw_pcie_disable_atu()
PCI: dwc: Make use of BIT() in constant definitions
PCI: dwc: Enable iATU unroll for endpoint too
PCI: dwc: Fix ATU identification for designware version >= 4.80
PCI: dwc: imx6: Share PHY debug register definitions
PCI: dwc: Cleanup DBI,ATU read and write APIs
PCI: dwc: rename readl/writel_dbi ops to read/write_dbi
PCI: dwc: Sync register definitions with Linux-5.4
PCI: dwc: Return directly when num-lanes is not found
PCI: Add layerscape PCIe driver
ARM Layerscape: ls1046ardb: Fix SD partitions
ARM Layerscape: ls1046ardb: Add barebox update handler
ARM Layerscape: ls1046ardb: Fix SPI NOR flash compatibles
ARM Layerscape: ls1046ardb: Enable PCIe support
ARM Layerscape: ls1046ardb: Fix EEPROM nodes
ARM64: Switch to 4 level page tables
ARM Layerscape: ls1046ardb: read nxid eeprom
ARM: Layerscape: TQMLS1046a: Fix partition name
net: fsl-fman: Disable unused network interfaces
ARM: Layerscape: PPA: Disable CAAM JR used by secure firmware
Merge branch 'for-next/arm'
Merge branch 'for-next/dts'
Merge branch 'for-next/fsl-fman'
Merge branch 'for-next/gpio'
Merge branch 'for-next/imx'
Merge branch 'for-next/layerscape'
Merge branch 'for-next/misc'
Merge branch 'for-next/pci'
Merge branch 'for-next/randfixes'
Merge branch 'for-next/sdhci'
Merge branch 'for-next/shebang'
Merge branch 'for-next/stm32'
Merge branch 'for-next/usb'
Merge branch 'for-next/watchdog'
Merge branch 'for-next/zynq'
ARM: i.MX: Fix PBL size test
usb: ehci: Do not use memset on dma coherent memory
Release v2020.01.0
Stefan Riedmueller (3):
ARM: dts: imx6: phycore: Make use of upstream devicetree
ARM: dts: imx6: phycore: Update License, copyright and model description
ARM: boards: phytec-som-imx6: Replace spi by spi-nor in bootsource script
Thomas Haemmerle (1):
mci: add Arasan SDHCI controller driver
Documentation/boards/stm32mp.rst | 10 +
Documentation/gen_commands.py | 2 +-
Documentation/user/usb.rst | 2 +-
MAKEALL | 2 +-
Makefile | 4 +-
README | 15 +
arch/arm/Kconfig | 6 +
arch/arm/Makefile | 3 +
arch/arm/boards/avnet-zedboard/Makefile | 1 -
arch/arm/boards/avnet-zedboard/board.c | 24 -
arch/arm/boards/avnet-zedboard/flash_header.c | 62 -
arch/arm/boards/avnet-zedboard/lowlevel.c | 10 +-
arch/arm/boards/avnet-zedboard/zedboard.zynqcfg | 24 +
arch/arm/boards/embedsky-e9/board.c | 5 -
arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 4 +-
arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c | 4 +-
arch/arm/boards/freescale-mx6-sabresd/board.c | 5 -
arch/arm/boards/ls1046ardb/board.c | 122 +
arch/arm/boards/nvidia-beaver/Makefile | 4 +-
arch/arm/boards/nvidia-jetson-tk1/Makefile | 4 +-
.../defaultenv-physom-imx6-phycore/init/bootsource | 2 +-
.../defaultenv-physom-imx6/init/bootsource | 2 +-
.../flash-header-phytec-pcaaxl3-1gib-1bank.imxcfg | 1 +
.../flash-header-phytec-pcaaxl3-1gib.imxcfg | 1 +
.../flash-header-phytec-pcaaxl3-2gib.imxcfg | 1 +
.../flash-header-phytec-pcl063-256mb.imxcfg | 1 +
.../flash-header-phytec-pcl063-512mb.imxcfg | 1 +
.../flash-header-phytec-pcm058-1gib.imxcfg | 1 +
.../flash-header-phytec-pcm058-2gib.imxcfg | 1 +
.../flash-header-phytec-pcm058dl-1gib-32bit.imxcfg | 1 +
.../flash-header-phytec-pcm058dl-1gib.imxcfg | 1 +
.../flash-header-phytec-pcm058dl-256mb.imxcfg | 2 +
.../flash-header-phytec-pcm058qp-1gib.imxcfg | 1 +
.../flash-header-phytec-pfla02-1gib-1bank.imxcfg | 1 +
.../flash-header-phytec-pfla02-1gib.imxcfg | 1 +
.../flash-header-phytec-pfla02-2gib.imxcfg | 1 +
.../flash-header-phytec-pfla02-4gib.imxcfg | 1 +
.../flash-header-phytec-pfla02-512mb-1bank.imxcfg | 1 +
.../flash-header-phytec-pfla02dl-1gib-1bank.imxcfg | 1 +
.../flash-header-phytec-pfla02dl-1gib.imxcfg | 1 +
.../flash-header-phytec-pfla02s-128mb-1bank.imxcfg | 1 +
.../flash-header-phytec-pfla02s-256mb-1bank.imxcfg | 1 +
.../flash-header-phytec-pfla02s-512mb-1bank.imxcfg | 1 +
arch/arm/boards/stm32mp157c-dk2/board.c | 11 -
arch/arm/boards/stm32mp157c-dk2/lowlevel.c | 17 +-
arch/arm/boards/toradex-colibri-t20/Makefile | 6 +-
arch/arm/boards/toshiba-ac100/Makefile | 4 +-
arch/arm/boards/wago-pfc-am35xx/board-mlo.c | 4 +-
arch/arm/boards/zii-imx51-rdu1/Makefile | 1 -
arch/arm/boards/zii-imx7d-dev/Makefile | 1 -
arch/arm/boards/zii-vf610-dev/Makefile | 1 -
.../configs/{zedboard_defconfig => zynq_defconfig} | 4 +-
arch/arm/configs/zynqmp_defconfig | 4 +-
arch/arm/cpu/Makefile | 3 +-
arch/arm/cpu/common.c | 4 +
arch/arm/cpu/dtb.c | 2 -
arch/arm/cpu/mmu-early_64.c | 6 +-
arch/arm/cpu/mmu_64.c | 7 +-
arch/arm/cpu/mmu_64.h | 9 +-
arch/arm/cpu/psci.c | 104 -
arch/arm/cpu/start.c | 22 +-
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/fsl-ls1046a-rdb.dts | 46 +-
arch/arm/dts/fsl-tqmls1046a-mbls10xxa.dts | 50 +-
arch/arm/dts/imx6dl-phytec-pbab01.dts | 4 +-
arch/arm/dts/imx6dl-phytec-phyboard-subra.dts | 3 +
arch/arm/dts/imx6dl-phytec-phycore-som-emmc.dts | 37 +-
arch/arm/dts/imx6dl-phytec-phycore-som-lc-emmc.dts | 24 +-
arch/arm/dts/imx6dl-phytec-phycore-som-lc-nand.dts | 18 +-
arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts | 34 +-
arch/arm/dts/imx6q-phytec-pbaa03.dts | 3 +
arch/arm/dts/imx6q-phytec-pbab01.dts | 3 +
arch/arm/dts/imx6q-phytec-phyboard-alcor.dts | 3 +
arch/arm/dts/imx6q-phytec-phyboard-subra.dts | 3 +
arch/arm/dts/imx6q-phytec-phycore-som-emmc.dts | 40 +-
arch/arm/dts/imx6q-phytec-phycore-som-nand.dts | 40 +-
arch/arm/dts/imx6qdl-phytec-mira.dtsi | 44 +
arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi | 297 +-
arch/arm/dts/imx6qp-phytec-phycore-som-nand.dts | 38 +-
arch/arm/dts/imx6s-phytec-pbab01.dts | 4 +-
arch/arm/dts/imx6ul-phytec-phycore-som-nand.dts | 4 +-
arch/arm/dts/imx6ull-phytec-phycore-som-emmc.dts | 4 +-
.../arm/dts/imx6ull-phytec-phycore-som-lc-nand.dts | 4 +-
arch/arm/dts/imx6ull-phytec-phycore-som-nand.dts | 4 +-
arch/arm/dts/stm32mp157a-dk1.dtsi | 4 -
arch/arm/dts/stm32mp157c.dtsi | 8 +
arch/arm/dts/zynq-zed.dts | 7 +
arch/arm/include/asm/barebox-arm-head.h | 4 +
arch/arm/include/asm/pgtable64.h | 5 +-
arch/arm/lib32/Makefile | 1 +
arch/arm/{cpu => lib32}/start-kernel-optee.S | 0
arch/arm/mach-at91/Kconfig | 1 +
arch/arm/mach-davinci/Kconfig | 2 +
arch/arm/mach-imx/Kconfig | 22 +
arch/arm/mach-imx/include/mach/vf610.h | 2 +
arch/arm/mach-imx/vf610.c | 8 +
arch/arm/mach-layerscape/Kconfig | 3 +
arch/arm/mach-layerscape/ppa.c | 23 +-
arch/arm/mach-mxs/bcb.c | 2 +-
arch/arm/mach-omap/Makefile | 2 -
arch/arm/mach-stm32mp/Makefile | 1 +
arch/arm/mach-stm32mp/ddrctrl.c | 155 +
arch/arm/mach-stm32mp/include/mach/ddr_regs.h | 368 ++
arch/arm/mach-stm32mp/include/mach/entry.h | 19 +
arch/arm/mach-stm32mp/include/mach/stm32.h | 2 +
arch/arm/mach-tegra/Makefile | 12 +-
arch/arm/mach-zynq/Kconfig | 21 +-
arch/arm/mach-zynq/Makefile | 2 +-
arch/arm/mach-zynq/devices.c | 13 -
arch/arm/mach-zynq/include/mach/barebox.lds.h | 8 -
arch/arm/mach-zynq/include/mach/devices.h | 20 -
.../arm/mach-zynq/include/mach/zynq-flash-header.h | 39 +-
.../mach-zynq/include/mach/zynq7000-header-regs.h | 49 +
arch/arm/mach-zynq/include/mach/zynq7000-regs.h | 1 +
arch/arm/mach-zynq/zynq.c | 30 +-
arch/mips/Makefile | 4 +-
arch/mips/mach-ath79/art.c | 2 +-
arch/x86/mach-efi/elf_x86_64_efi.lds.S | 7 +-
commands/Kconfig | 15 +
commands/Makefile | 1 +
commands/gpio.c | 4 +-
commands/keystore.c | 2 +-
commands/smc.c | 162 +
common/Kconfig | 2 +-
common/bootsource.c | 1 +
common/console_simple.c | 11 -
common/efi/efi.c | 2 +-
common/ratp/Kconfig | 1 +
drivers/Makefile | 4 +-
drivers/block/efi-block-io.c | 11 +-
drivers/bus/Kconfig | 8 +
drivers/bus/Makefile | 1 +
drivers/bus/acpi.c | 255 +
drivers/clk/Makefile | 1 +
drivers/clk/zynq/Makefile | 1 +
.../clk-zynq7000.c => drivers/clk/zynq/clkc.c | 149 +-
drivers/clocksource/Kconfig | 2 +-
drivers/efi/efi-device.c | 11 +-
drivers/firmware/zynqmp-fpga.c | 2 +-
drivers/gpio/gpiolib.c | 47 +-
drivers/i2c/Makefile | 3 +-
drivers/i2c/busses/i2c-gpio.c | 4 +-
drivers/i2c/busses/i2c-stm32.c | 11 +-
drivers/input/Kconfig | 1 +
drivers/mci/Kconfig | 20 +-
drivers/mci/Makefile | 6 +-
drivers/mci/arasan-sdhci.c | 423 ++
drivers/mci/dove-sdhci.c | 159 +-
drivers/mci/imx-esdhc-common.c | 275 +
drivers/mci/imx-esdhc-pbl.c | 333 +-
drivers/mci/imx-esdhc.c | 441 +-
drivers/mci/imx-esdhc.h | 108 +-
drivers/mci/mci-bcm2835.c | 227 +-
drivers/mci/sdhci.c | 140 +
drivers/mci/sdhci.h | 127 +-
drivers/mci/tegra-sdmmc.c | 159 +-
drivers/mfd/da9053.c | 1 -
drivers/mfd/da9063.c | 17 +-
drivers/mfd/stpmic1.c | 3 +-
drivers/mfd/superio.c | 4 +-
drivers/misc/Kconfig | 7 +
drivers/misc/Makefile | 1 +
drivers/misc/acpi-test.c | 61 +
drivers/mtd/nand/nand_base.c | 4 +-
drivers/mtd/spi-nor/spi-nor.c | 2 +
drivers/net/Kconfig | 3 +-
drivers/net/designware_stm32.c | 1 -
drivers/net/fsl-fman.c | 128 +-
drivers/net/macb.c | 25 +-
drivers/nvme/host/core.c | 2 +-
drivers/nvmem/bsec.c | 4 +-
drivers/of/base.c | 122 +-
drivers/pci/Kconfig | 7 +
drivers/pci/Makefile | 1 +
drivers/pci/bus.c | 26 +
drivers/pci/pci-imx6.c | 11 +-
drivers/pci/pci-layerscape.c | 484 ++
drivers/pci/pcie-designware-host.c | 16 -
drivers/pci/pcie-designware.c | 108 +-
drivers/pci/pcie-designware.h | 152 +-
drivers/pinctrl/Kconfig | 20 +-
drivers/pinctrl/pinctrl-tegra30.c | 4 +-
drivers/remoteproc/Kconfig | 10 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/remoteproc_core.c | 29 +-
drivers/remoteproc/stm32_rproc.c | 199 +
drivers/serial/Kconfig | 8 +
drivers/serial/Makefile | 1 +
drivers/serial/serial_ns16550_pci.c | 5311 ++++++++++++++++++++
drivers/spi/spi.c | 2 +-
drivers/usb/dwc3/Kconfig | 3 +
drivers/usb/dwc3/core.c | 23 +-
drivers/usb/dwc3/core.h | 1 -
drivers/usb/gadget/f_fastboot.c | 2 +-
drivers/usb/host/ehci-hcd.c | 15 +-
drivers/usb/imx/Kconfig | 1 +
drivers/usb/imx/chipidea-imx.c | 85 +-
drivers/usb/misc/Kconfig | 1 +
drivers/usb/musb/Kconfig | 1 +
drivers/usb/musb/musb_dsps.c | 44 +-
drivers/usb/otg/Kconfig | 4 +
drivers/usb/otg/Makefile | 2 +-
drivers/usb/otg/otgdev.c | 69 +
drivers/watchdog/f71808e_wdt.c | 7 +-
drivers/watchdog/imxwd.c | 14 +
drivers/watchdog/stm32_iwdg.c | 3 +-
drivers/watchdog/stpmic1_wdt.c | 28 +-
drivers/watchdog/wd_core.c | 48 +-
dts/scripts/cronjob | 2 +-
dts/scripts/index-filter.sh | 2 +-
dts/scripts/merge-new-release.sh | 2 +-
dts/src/arm/imx6-logicpd-baseboard.dtsi | 4 +
dts/src/arm/imx6qdl-sabreauto.dtsi | 8 +
dts/src/arm/stm32mp157c-ev1.dts | 13 +-
dts/src/arm/stm32mp157c.dtsi | 4 +-
dts/src/arm/sun8i-a83t-tbs-a711.dts | 1 +
dts/src/arm64/freescale/fsl-ls1028a-qds.dts | 2 +-
dts/src/arm64/freescale/imx8mm.dtsi | 6 +-
dts/src/arm64/freescale/imx8mn.dtsi | 6 +-
dts/src/arm64/freescale/imx8mq-zii-ultra.dtsi | 2 +-
fs/pstore/platform.c | 3 +
fs/pstore/ram.c | 8 +-
images/Makefile | 3 +-
images/Makefile.imx | 591 +--
images/Makefile.zynq | 23 +
include/acpi.h | 73 +
include/asm-generic/barebox.lds.h | 14 +-
include/bootsource.h | 1 +
include/common.h | 5 +
include/console.h | 5 +
include/driver.h | 4 +-
include/efi.h | 42 +-
include/efi/efi-device.h | 12 +
include/gpio.h | 6 +
include/linux/mod_devicetable.h | 1 +
include/linux/pci.h | 34 +
include/linux/remoteproc.h | 1 -
include/of.h | 83 +-
include/param.h | 24 +
include/reset_source.h | 5 +
include/soc/fsl/fsl_fman.h | 3 +
include/usb/chipidea-imx.h | 8 +-
include/usb/usb.h | 3 +
include/watchdog.h | 27 +-
lib/Kconfig | 5 +
lib/gui/picopng.c | 60 +-
lib/parameter.c | 22 +
lib/zstd/decompress.c | 10 +-
scripts/Makefile | 1 +
scripts/canon-a1100-image | 4 +-
scripts/check_size | 2 +-
scripts/dfuboot.sh | 2 +-
scripts/extract_symbol_offset | 2 +-
scripts/gen-dtb-s | 2 +-
scripts/genenv | 2 +-
scripts/imx/imx.c | 23 +-
scripts/socfpga_get_sequencer | 2 +-
scripts/socfpga_import_preloader | 2 +-
scripts/socfpga_xml_to_config.sh | 2 +-
scripts/zynq_mkimage.c | 274 +-
260 files changed, 10839 insertions(+), 2970 deletions(-)
delete mode 100644 arch/arm/boards/avnet-zedboard/flash_header.c
create mode 100644 arch/arm/boards/avnet-zedboard/zedboard.zynqcfg
rename arch/arm/configs/{zedboard_defconfig => zynq_defconfig} (92%)
create mode 100644 arch/arm/dts/imx6qdl-phytec-mira.dtsi
create mode 100644 arch/arm/dts/zynq-zed.dts
rename arch/arm/{cpu => lib32}/start-kernel-optee.S (100%)
create mode 100644 arch/arm/mach-stm32mp/ddrctrl.c
create mode 100644 arch/arm/mach-stm32mp/include/mach/ddr_regs.h
create mode 100644 arch/arm/mach-stm32mp/include/mach/entry.h
delete mode 100644 arch/arm/mach-zynq/devices.c
delete mode 100644 arch/arm/mach-zynq/include/mach/barebox.lds.h
delete mode 100644 arch/arm/mach-zynq/include/mach/devices.h
create mode 100644 arch/arm/mach-zynq/include/mach/zynq7000-header-regs.h
create mode 100644 commands/smc.c
create mode 100644 drivers/bus/acpi.c
create mode 100644 drivers/clk/zynq/Makefile
rename arch/arm/mach-zynq/clk-zynq7000.c => drivers/clk/zynq/clkc.c (65%)
create mode 100644 drivers/mci/arasan-sdhci.c
create mode 100644 drivers/mci/imx-esdhc-common.c
create mode 100644 drivers/mci/sdhci.c
create mode 100644 drivers/misc/acpi-test.c
create mode 100644 drivers/pci/pci-layerscape.c
create mode 100644 drivers/remoteproc/stm32_rproc.c
create mode 100644 drivers/serial/serial_ns16550_pci.c
create mode 100644 drivers/usb/otg/otgdev.c
create mode 100644 images/Makefile.zynq
create mode 100644 include/acpi.h
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
