Re: [RFC 4/5] net: rtl8169: make it work on big-endian system

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Sun, Feb 09, 2020 at 09:30:13AM +0300, Antony Pavlov wrote:
> On Tue, 4 Feb 2020 15:03:53 +0100
> Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> wrote:
> 
> > Hi Antony,
> > 
> > do you wont to resent this patches as not RFC?
> 
> Hi!
> 
> I want to test PCI-related patches on ARM before resending
> (especially 'net: e1000: make it work on MIPS').
> 
> Is there any qemu configuration to test ARM barebox with PCI support?

yes. vexpress.
Here is a script to run vexpress on qemu build in distrokit:
https://git.pengutronix.de/cgit/DistroKit/tree/configs/platform-v7a/run

> -- 
> Best regards,
>   Antony Pavlov
> 
> > 
> > On 09.01.20 08:28, Antony Pavlov wrote:
> > > Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx>
> > > ---
> > >   drivers/net/rtl8169.c | 34 +++++++++++++++++-----------------
> > >   1 file changed, 17 insertions(+), 17 deletions(-)
> > > 
> > > diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
> > > index 80997dc89f..3762cb6354 100644
> > > --- a/drivers/net/rtl8169.c
> > > +++ b/drivers/net/rtl8169.c
> > > @@ -230,13 +230,13 @@ static void rtl8169_init_ring(struct rtl8169_priv *priv)
> > >   	for (i = 0; i < NUM_RX_DESC; i++) {
> > >   		if (i == (NUM_RX_DESC - 1))
> > >   			priv->rx_desc[i].status =
> > > -				BD_STAT_OWN | BD_STAT_EOR | PKT_BUF_SIZE;
> > > +				cpu_to_le32(BD_STAT_OWN | BD_STAT_EOR | PKT_BUF_SIZE);
> > >   		else
> > >   			priv->rx_desc[i].status =
> > > -				BD_STAT_OWN | PKT_BUF_SIZE;
> > > +				cpu_to_le32(BD_STAT_OWN | PKT_BUF_SIZE);
> > >   
> > >   		priv->rx_desc[i].buf_addr =
> > > -				virt_to_phys(priv->rx_buf + i * PKT_BUF_SIZE);
> > > +				cpu_to_le32(virt_to_phys(priv->rx_buf + i * PKT_BUF_SIZE));
> > >   	}
> > >   }
> > >   
> > > @@ -358,21 +358,21 @@ static int rtl8169_eth_send(struct eth_device *edev, void *packet,
> > >   
> > >   	priv->tx_desc[entry].buf_Haddr = 0;
> > >   	priv->tx_desc[entry].buf_addr =
> > > -		virt_to_phys(priv->tx_buf + entry * PKT_BUF_SIZE);
> > > +		cpu_to_le32(virt_to_phys(priv->tx_buf + entry * PKT_BUF_SIZE));
> > >   
> > >   	if (entry != (NUM_TX_DESC - 1)) {
> > >   		priv->tx_desc[entry].status =
> > > -			BD_STAT_OWN | BD_STAT_FS | BD_STAT_LS |
> > > -			((packet_length > ETH_ZLEN) ? packet_length : ETH_ZLEN);
> > > +			cpu_to_le32(BD_STAT_OWN | BD_STAT_FS | BD_STAT_LS |
> > > +			((packet_length > ETH_ZLEN) ? packet_length : ETH_ZLEN));
> > >   	} else {
> > >   		priv->tx_desc[entry].status =
> > > -			BD_STAT_OWN | BD_STAT_EOR | BD_STAT_FS | BD_STAT_LS |
> > > -			((packet_length > ETH_ZLEN) ? packet_length : ETH_ZLEN);
> > > +			cpu_to_le32(BD_STAT_OWN | BD_STAT_EOR | BD_STAT_FS | BD_STAT_LS |
> > > +			((packet_length > ETH_ZLEN) ? packet_length : ETH_ZLEN));
> > >   	}
> > >   
> > >   	RTL_W8(priv, TxPoll, 0x40);
> > >   
> > > -	while (priv->tx_desc[entry].status & BD_STAT_OWN)
> > > +	while (le32_to_cpu(priv->tx_desc[entry].status) & BD_STAT_OWN)
> > >   		;
> > >   
> > >   	dma_sync_single_for_cpu((unsigned long)priv->tx_buf + entry *
> > > @@ -391,9 +391,9 @@ static int rtl8169_eth_rx(struct eth_device *edev)
> > >   
> > >   	entry = priv->cur_rx % NUM_RX_DESC;
> > >   
> > > -	if ((priv->rx_desc[entry].status & BD_STAT_OWN) == 0) {
> > > -		if (!(priv->rx_desc[entry].status & BD_STAT_RX_RES)) {
> > > -			pkt_size = (priv->rx_desc[entry].status & 0x1fff) - 4;
> > > +	if ((le32_to_cpu(priv->rx_desc[entry].status) & BD_STAT_OWN) == 0) {
> > > +		if (!(le32_to_cpu(priv->rx_desc[entry].status) & BD_STAT_RX_RES)) {
> > > +			pkt_size = (le32_to_cpu(priv->rx_desc[entry].status) & 0x1fff) - 4;
> > >   
> > >   			dma_sync_single_for_cpu((unsigned long)priv->rx_buf
> > >   						+ entry * PKT_BUF_SIZE,
> > > @@ -407,14 +407,14 @@ static int rtl8169_eth_rx(struct eth_device *edev)
> > >   						   pkt_size, DMA_FROM_DEVICE);
> > >   
> > >   			if (entry == NUM_RX_DESC - 1)
> > > -				priv->rx_desc[entry].status = BD_STAT_OWN |
> > > -					BD_STAT_EOR | PKT_BUF_SIZE;
> > > +				priv->rx_desc[entry].status = cpu_to_le32(BD_STAT_OWN |
> > > +					BD_STAT_EOR | PKT_BUF_SIZE);
> > >   			else
> > >   				priv->rx_desc[entry].status =
> > > -					BD_STAT_OWN | PKT_BUF_SIZE;
> > > +					cpu_to_le32(BD_STAT_OWN | PKT_BUF_SIZE);
> > >   			priv->rx_desc[entry].buf_addr =
> > > -				virt_to_phys(priv->rx_buf +
> > > -				             entry * PKT_BUF_SIZE);
> > > +				cpu_to_le32(virt_to_phys(priv->rx_buf +
> > > +				             entry * PKT_BUF_SIZE));
> > >   		} else {
> > >   			dev_err(&edev->dev, "rx error\n");
> > >   		}
> > > 
> > 
> > Kind regards,
> > Oleksij Rempel
> > 
> > -- 
> > Pengutronix e.K.                           |                             |
> > Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> > Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox




[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux