>From USB 2.0 specification, section 9.4.5:
ClearFeature(ENDPOINT_HALT) request always results in
the data toggle being reinitialized to DATA0.
Signed-off-by: Jules Maselbas <jmaselbas@xxxxxxxxx>
---
drivers/usb/dwc2/host.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/usb/dwc2/host.c b/drivers/usb/dwc2/host.c
index 2cde5977b..a97c7dac5 100644
--- a/drivers/usb/dwc2/host.c
+++ b/drivers/usb/dwc2/host.c
@@ -373,7 +373,24 @@ int dwc2_submit_control_msg(struct usb_device *udev,
if (ret)
return ret;
+ if (setup->requesttype == USB_RECIP_ENDPOINT
+ && setup->request == USB_REQ_CLEAR_FEATURE) {
+ /* From USB 2.0, section 9.4.5:
+ * ClearFeature(ENDPOINT_HALT) request always results
+ * in the data toggle being reinitialized to DATA0.
+ */
+ int ep = le16_to_cpu(setup->index & 0x7f);
+ int in = le16_to_cpu(setup->index & 0x80);
+ int data0 = TSIZ_SC_MC_PID_DATA0;
+
+ if (in)
+ dwc2->in_data_toggle[devnum][ep] = data0;
+ else
+ dwc2->out_data_toggle[devnum][ep] = data0;
+ }
+
udev->act_len = act_len;
+ udev->status = 0;
return 0;
}
--
2.21.0.196.g041f5ea
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
