Hello Sascha, On 2/19/20 8:52 AM, Sascha Hauer wrote: > On Mon, Feb 17, 2020 at 03:38:17PM +0100, yegorslists@xxxxxxxxxxxxxx wrote: >> From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx> >> >> This reduces the size of MLO enough to fit into SRAM. >> >> Signed-off-by: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx> >> --- >> arch/arm/boards/vscom-baltos/lowlevel.c | 6 +++--- >> 1 file changed, 3 insertions(+), 3 deletions(-) >> >> diff --git a/arch/arm/boards/vscom-baltos/lowlevel.c b/arch/arm/boards/vscom-baltos/lowlevel.c >> index 98bbbaae1..0a220f262 100644 >> --- a/arch/arm/boards/vscom-baltos/lowlevel.c >> +++ b/arch/arm/boards/vscom-baltos/lowlevel.c >> @@ -66,7 +66,7 @@ static const struct am33xx_emif_regs ddr3_regs_256mb = { >> >> }; >> >> -extern char __dtb_am335x_baltos_minimal_start[]; >> +extern char __dtb_z_am335x_baltos_minimal_start[]; >> >> /** >> * @brief The basic entry point for board initialization. >> @@ -82,7 +82,7 @@ static noinline void baltos_sram_init(void) >> uint32_t sdram_size; >> void *fdt; >> >> - fdt = __dtb_am335x_baltos_minimal_start; >> + fdt = __dtb_z_am335x_baltos_minimal_start; >> >> /* WDT1 is already running when the bootloader gets control >> * Disable it to avoid "random" resets >> @@ -132,7 +132,7 @@ ENTRY_FUNCTION(start_am33xx_baltos_sdram, r0, r1, r2) >> */ >> __raw_writel(0x000010ff, AM33XX_PRM_RSTTIME); >> >> - fdt = __dtb_am335x_baltos_minimal_start; >> + fdt = __dtb_z_am335x_baltos_minimal_start; > > You have to select ARM_USE_COMPRESSED_DTB from the boards Kconfig entry > to make sure the uncompressing functions are available. ARM_USE_COMPRESSED_DTB is enabled transitively because ARCH_AM33XX selects it. > > Sascha > -- Pengutronix e.K. | | Steuerwalder Str. 21 | https://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox