[PATCH 1/2] mci: stm32_sdmmc2: add High-Speed (26 & 52 MHz) support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The SDMMC2 doesn't need any special setup for High-Speed modes, except
for the clock changes. Thus set the cap flags if the max clock would
allow for the higher speed mode.

Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
---
 drivers/mci/stm32_sdmmc2.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/mci/stm32_sdmmc2.c b/drivers/mci/stm32_sdmmc2.c
index 695e61d1ccd7..0c26869b0378 100644
--- a/drivers/mci/stm32_sdmmc2.c
+++ b/drivers/mci/stm32_sdmmc2.c
@@ -631,6 +631,11 @@ static int stm32_sdmmc2_probe(struct amba_device *adev,
 
 	mci_of_parse(&priv->mci);
 
+	if (mci->f_max >= 26000000)
+		mci->host_caps |= MMC_CAP_MMC_HIGHSPEED;
+	if (mci->f_max >= 52000000)
+		mci->host_caps |= MMC_CAP_MMC_HIGHSPEED_52MHZ;
+
 	return mci_register(&priv->mci);
 
 priv_free:
-- 
2.25.0


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux