Re: [PATCH 0/5] Add support for Kalray k1c core

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 15, 2020 at 11:26:45AM +0100, Clement Leger wrote:
> Kalray k1c core is embedded in Kalray Coolidge SoC. This core has the
> following features:
>  - 32/64 bits
>  - 6-issue VLIW architecture
>  - 64 x 64bits general purpose registers
>  - SIMD instructions
>  - little-endian
> 
> This port is a 64 bits one and allows to boot up to a barebox prompt on a k200
> board. k1c support for clocksource and watchdog is also part of this port.
> 
> In order to build a usable toolchain, build scripts are provided at the
> following address: https://github.com/kalray/build-scripts.
> 
> Kalray uses FOSS which is available at https://github.com/kalray
> 
> Clement Leger (5):
>   k1c: Initial Kalray Coolidge (k1c) architecture support
>   k1c: Add processor definitions
>   k1c: Add support for device tree
>   clocksource: k1c: Add k1c clocksource support
>   watchdog: k1c: Add k1c watchdog support

Uuuh, a shiny new architecture! You might also want to add some
(minimal) documentation in Documentation/boards/ to advertise it. This
way it will also appear on
https://www.barebox.org/doc/latest/boards.html :)

  - Roland

-- 
Roland Hieber, Pengutronix e.K.          | r.hieber@xxxxxxxxxxxxxx     |
Steuerwalder Str. 21                     | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686         | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux