U-Boot V2 Development (Barebox)

• Thread Index

• [PATCH 1/2] remoteproc: register a device for new remoteproc instances
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 2/2] remoteproc: add support for starting st,stm32mp1-m4
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] ARM: cpu: dtb: remove unused declaration
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] mci: dove: fix dereference of nullable pointer
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] i2c: gpio: use of_get_named_gpio() instead of of_get_named_gpio_flags()
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH 01/21] mci: Add sdhci helper
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 01/21] mci: Add sdhci helper
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: ath79: art: fix typo in SPDX-License-Identifier
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: psci: factor out smc command into commands/
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 00/21] mci: SDHCI helper functions and arasan driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 02/21] mci: sdhci: Add missing command type defines
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 06/21] mci: dove: use sdhci helpers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 20/21] mci: mci-bcm2835: Use generic PIO transfer function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 05/21] mci: tegra: use sdhci helpers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 11/21] mci: sdhci: remove 32bit register defines
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 01/21] mci: Add sdhci helper
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 07/21] mci: imx-esdhc: Use 16bit register definitions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 03/21] mci: imx-esdhc: use sdhci helpers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 17/21] mci: bcm2835: Use sdhci_set_cmd_xfer_mode()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 08/21] mci: mci-bcm2835: Use 16bit register definitions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 16/21] mci: imx-esdhc: Use sdhci_set_cmd_xfer_mode()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 18/21] mci: tegra: Use sdhci_set_cmd_xfer_mode()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 09/21] mci: tegra: Use 16bit register definitions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 12/21] mci: sdhci: remove duplicate transfer mode register defines
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 19/21] mci: imx-esdhci: Use generic PIO transfer function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 15/21] mci: dove: Use sdhci_set_cmd_xfer_mode()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 04/21] mci: bcm2835: use sdhci helpers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 21/21] mci: add Arasan SDHCI controller driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 14/21] mci: sdhci: remove duplicate register defines for prsstat bits
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 13/21] mci: sdhci: remove duplicate register defines for interrupt bits
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 10/21] mci: imx-esdhc-pbl: Use 16bit register definitions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 6/8] ARM: Add generic device tree 2nd stage support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 6/8] ARM: Add generic device tree 2nd stage support
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 6/8] ARM: Add generic device tree 2nd stage support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: zynqmp: defconfig: fix FIRMWARE_ZYNQMP_FPGA
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: zynqmp: defconfig: reenable DRIVER_NET_MACB
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• [PATCH 0/2] ARM: zynqmp: defconfig fixes
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• Re: [PATCH] mci: add Arasan SDHCI controller driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] image: add zynqimg to gitignore
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: disable all other devices when enabling the new one
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: cpsw: don't reset twice
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] MIPS: ath79: art: fix typo in SPDX-License-Identifier
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] mci: add Arasan SDHCI controller driver
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH] image: add zynqimg to gitignore
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH] net: disable all other devices when enabling the new one
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH] net: cpsw: don't reset twice
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] net: designware: eqos: stop DMA on halt
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: designware: eqos: remove done TODO
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] nvmem: bsec: fix typo in function name (s/st32/stm32/)
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] filetype: mvebu: Fix kwbimage v1 detection
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] filetype: mvebu: Fix kwbimage v1 detection
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/5] commands: smc: verify PSCI_POWER_ON with interprocessor handshake
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 5/5] commands: smc: make command usable when ARM_PSCI is undefined
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 2/5] ARM: psci: properly wire in command help
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 1/5] ARM: psci: factor out smc command into commands/
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 3/5] commands: psci: make locally-used function static
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 2/3] net: designware: eqos: enable clocks before mdio_register
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 3/3] net: designware: eqos: fix NULL pointer use in dev_printf
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 0/3] net: designware: eqos: stop DMA on halt
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 1/3] net: designware: eqos: properly stop DMA on halt
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH] MIPS: ath79: art: fix typo in SPDX-License-Identifier
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: ath79: art: fix typo in SPDX-License-Identifier
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• [PATCH] nvmem: bsec: fix typo in function name (s/st32/stm32/)
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] MIPS: ath79: art: fix typo in SPDX-License-Identifier
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH 1/6] net: fsl-fman: reset device before leaving
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] usb: dwc3: Remove wrong error messages
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] net: designware: eqos: remove done TODO
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/6] net: fsl-fman: reset device before leaving
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/6] net: fsl-fman: simplify setting next offset
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/6] net: fsl-fman: Store index for txbd
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/6] fsl-fman patches
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 6/6] net: fsl-fman: do not leave not transmitted DMA buffers mapped
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/6] net: fsl-fman: move status read into loop
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/6] net: fsl-fman: Store index for rxbd
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/6] net: fsl-fman: reset device before leaving
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 01/10] ARM: dts: stm32mp: move alias to SoC device tree
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: imx6: phycore: Make use of upstream devicetree
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] fixup! ARM: stm32mp: dk2: don't hard-code memory size
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fixup! ARM: stm32mp: add basic DDR controller driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/5] i.mx6: signed boot: add habv4-imx6-gencsf.h to the flash header of the PHYTEC boards
  • From: Maik Otto <m.otto@xxxxxxxxx>
• Re: Oselas 2018.12.0 toolchain seems to break barebox for AM335x
  • From: Andreas Geisenhainer <Andreas.Geisenhainer@xxxxxxxxxxxx>
• Re: [PATCH 1/1] net: designware: eqos: stop DMA on halt
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: start: check for machine type last
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/5] i.mx6: signed boot: add habv4-imx6-gencsf.h to the flash header of the PHYTEC boards
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: Compile with -fPIE
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Oselas 2018.12.0 toolchain seems to break barebox for AM335x
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 04/10] watchdog: stm32_iwdg: return -ENOSYS on attempt to disable
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 10/10] ARM: stm32mp: dk2: don't hard-code memory size
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 07/10] ARM: stm32mp: add helper for querying ram size
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 02/10] ARM: stm32mp157c-dk2: add optional DEBUG_LL print to entry point
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 01/10] ARM: dts: stm32mp: move alias to SoC device tree
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 05/10] i2c: stm32: use device_reset_us helper instead of open-coding
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 06/10] Documentation: boards: stm32mp: document boot error LED
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 08/10] ARM: stm32mp: add basic DDR controller driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 09/10] ARM: stm32mp: add stm32mp_cpu_lowlevel_init with stack set up
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 03/10] mfd: stpmic1: use register define from header
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Oselas 2018.12.0 toolchain seems to break barebox for AM335x
  • From: Andreas Geisenhainer <Andreas.Geisenhainer@xxxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: imx6: phycore: Make use of upstream devicetree
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 2/2] ARM: dts: imx6: phycore: Update License, copyright and model description
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• Re: barebox on VoCore2
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: state: eMMC boot0-partitions backend for Linux
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: am335x: Enable MMC2 clock
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/1] net: designware: eqos: stop DMA on halt
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 1/1] net: designware: eqos: stop DMA on halt
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• barebox on VoCore2
  • From: Mauro Condarelli <mc5686@xxxxxxxxx>
• Re: [PATCH v3 1/4] watchdog: always populate watchdog priority from device tree if possible
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 01/18] ARM: zynq: zedboard: enable MACB driver in defconfig
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2 14/18] ARM: zynq: switch to DT based probing
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2 04/18] ARM: zynq: move header generation to zynq_mkimage
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2 16/18] ARM: zynq: switch to multi-image build
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2 18/18] ARM: zynq: add bootsource detection
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2 10/18] clk: zynq: use base address of clock controller
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2 13/18] clk: zynq: partially sync with Linux
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2 17/18] bootsource: add JTAG bootsource
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2 15/18] clk: zynq: remove clkdevs
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2 12/18] clk: zynq: fix up address from DT
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2 11/18] clk: zynq: improve PLL enable handling
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2 09/18] ARM: zynq: move clock controller driver to drivers/clk
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2 07/18] net: macb: handle more clocks
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2 08/18] net: macb: add Zynq compatible
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2 06/18] ARM: zynq: zedboard: provide DTB
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2 05/18] ARM: zynq: add size check in zynq_mkimage
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2 01/18] ARM: zynq: zedboard: enable MACB driver in defconfig
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2 03/18] ARM: zynq: use getopt in zynq_mkimage
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2 02/18] ARM: zynq: add trivial image build mechanism
  • From: Lucas Stach <dev@xxxxxxxxxx>
• Re: [RFC] WIP: import gpio-poweroff driver from linux kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: i.MX6: Embedsky E9: remove inaccurate comment
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [RFC] WIP: import gpio-poweroff driver from linux kernel
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 2/2] ARM: i.MX6: sabresd: remove inaccurate comment
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: i.MX6: Embedsky E9: remove inaccurate comment
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] watchdog: implement generic support for .running device parameter
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 2/4] watchdog: implement generic support for .running device parameter
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 1/4] watchdog: always populate watchdog priority from device tree if possible
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 4/4] watchdog: f71808e: support .running device parameter
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 3/4] watchdog: imxwd: support .running device parameter on i.MX2+
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: mmu-early: On i.MX6 with HAB map ROM is mapped without XN
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 11/18] ARM: zynq: fixup SLCR ranges
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 13/18] clk: zynq: partially sync with Linux
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 17/18] bootsource: add JTAG bootsource
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 16/18] ARM: zynq: switch to multi-image build
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 04/18] ARM: zynq: move header generation to zynq_mkimage
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 14/18] ARM: zynq: switch to DT based probing
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 18/18] ARM: zynq: add bootsource detection
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 12/18] clk: zynq: improve PLL enable handling
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 15/18] clk: zynq: remove clkdevs
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 10/18] clk: zynq: use base address of clock controller
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 11/18] ARM: zynq: fixup SLCR ranges
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 08/18] net: macb: add Zynq compatible
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 09/18] ARM: zynq: move clock controller driver to drivers/clk
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 07/18] net: macb: handle more clocks
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 06/18] ARM: zynq: zedboard: provide DTB
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 03/18] ARM: zynq: use getopt in zynq_mkimage
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 05/18] ARM: zynq: add size check in zynq_mkimage
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 02/18] ARM: zynq: add trivial image build mechanism
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 01/18] ARM: zynq: zedboard: enable MACB driver in defconfig
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 00/18] Zynq multi-image conversion and improvements
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH] ARM: start: check for machine type last
  • From: Lucas Stach <dev@xxxxxxxxxx>
• v2019.11.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/6] ARM: psci: implement PSCI client driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] ARM: psci: add PSCI client driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: loongsonl: pull headers from linux kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] fixup! ARM: dts: stm32mp: report psci v0.2 at least
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 03/10] regulator: copy upstream struct regulator_desc documentation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2 4/6] ARM: psci: implement PSCI client driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 3/6] ARM: psci: wire in smc command help
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 2/6] ARM: psci: use CONFIG_ARM_PSCI_DEBUG for smc command
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 6/6] ARM: dts: stm32mp: report psci v0.2 at least
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 0/6] ARM: psci: add PSCI client driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 1/6] ARM: psci: translate PSCI error codes in smc command
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 5/6] ARM: stm32mp: select ARM_USE_COMPRESSED_DTB for the whole arch
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 02/10] commands: regulator: add support for enabling/disabling regulators
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 01/10] commands: regulator: move implementation to regulator core
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] misc: implement PSCI system reset driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 11/10] fixup! regulator: add driver for stpmic1-regulators
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 04/10] regulator: port Linux of_regulator_match
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 06/10] mfd: stpmic1: use dev_get_regmap instead of priv member
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 02/10] commands: regulator: add support for enabling/disabling regulators
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 08/10] ARM: dts: stm32mp157a-dk1: remove unnecessary sram node
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 07/10] regulator: add driver for stpmic1-regulators
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 05/10] regulator: import linear voltage range helpers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 09/10] ARM: stm32mp: enable STPMIC1 MFD and cell drivers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 10/10] Revert "ARM: dts: stm32mp157a-dk1: overwrite regulator for sdmmc node"
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 03/10] regulator: copy upstream struct regulator_desc documentation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 01/10] commands: regulator: move implementation to regulator core
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/7] misc: implement PSCI client driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 6/7] ARM: stm32mp: select ARM_USE_COMPRESSED_DTB for the whole arch
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/7] misc: implement PSCI system reset driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 7/7] ARM: dts: stm32mp: report psci v0.2 at least
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/7] psci: wire in smc command help
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/7] ARM: psci: use CONFIG_ARM_PSCI_DEBUG for smc command
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/7] misc: psci: translate PSCI error codes in smc command
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] watchdog: implement generic support for .running device parameter
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] watchdog: implement generic support for .running device parameter
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] watchdog: implement generic support for .running device parameter
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] watchdog: implement generic support for .running device parameter
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] watchdog: implement generic support for .running device parameter
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] param: drop unused parameters in helpers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] mfd: da9063: fix watchdog ping execution
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2 2/4] watchdog: implement generic support for .running device parameter
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 3/4] watchdog: imxwd: support .running device parameter on i.MX2+
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 1/4] watchdog: always populate watchdog priority from device tree if possible
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] watchdog: f71808e: support .running device parameter
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/4] watchdog: f71808e: support .running device parameter
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/4] watchdog: implement generic support for .running device parameter
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/4] watchdog: imxwd: support .running device parameter on i.MX2+
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/4] watchdog: always populate watchdog priority from device tree if possible
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] param: drop unused parameters in helpers
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH] usb: storage: Increase retries for usb_stor_transport()
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• Re: [PATCH] usb: storage: Increase retries for usb_stor_transport()
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v2] usb: storage: Increase retries for usb_stor_transport()
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• Re: [PATCH] usb: storage: Increase retries for usb_stor_transport()
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• Re: [PATCH] usb: storage: Increase retries for usb_stor_transport()
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: storage: Increase retries for usb_stor_transport()
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• [PATCH v2 2/2] mfd: da9063: fix watchdog ping execution
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] mfd: da9063: fix TWDSCALE debug message
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mfd: da9063: fix watchdog ping execution
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mfd: da9063: fix watchdog ping execution
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mfd: da9063: fix watchdog ping execution
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: storage: Increase retries for usb_stor_transport()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] of: of_path: fix return in case of EPROBE_DEFER
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] parameter: strip leading and trailing whitespaces
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] serial: cadence: fix serial_flush
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: pbl: keep __image_end section
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: force TEXT_BASE to zero only for relocatable build
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mfd: da9063: fix watchdog ping execution
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [BUG] Padding inserted by linker breaks magicvar linker array
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mfd: da9063: fix watchdog ping execution
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mfd: da9063: fix watchdog ping execution
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: zii-commmon: Fix NULL pointer dereference in do_rdu1_switch_reset()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: zii-imx8mq-dev: disable GPU and VPU power domain in DT
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fs: ubootvarfs: use correct format specifier for pointer diff
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: zii-common: setup Linux cmdline network config on RDU3
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] OF: gpio: don't warn if ignored GPIO flag matches the behavior
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: boards: stm32mp: document boot mode strap pins
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] ARM: stm32mp: finalize second stage support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] MIPS: loongsonl: pull headers from linux kernel
  • From: sendpatch@xxxxxx
• [BUG] Padding inserted by linker breaks magicvar linker array
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• state: eMMC boot0-partitions backend for Linux
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: force TEXT_BASE to zero only for relocatable build
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 1/2] ARM: pbl: keep __image_end section
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH] serial: cadence: fix serial_flush
  • From: Lucas Stach <dev@xxxxxxxxxx>
• Re: [PATCH] ARM: zii-commmon: Fix NULL pointer dereference in do_rdu1_switch_reset()
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/2] mfd: da9063: fix watchdog ping execution
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 1/2] mfd: da9063: fix TWDSCALE debug message
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] of: of_path: fix return in case of EPROBE_DEFER
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] parameter: strip leading and trailing whitespaces
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] ARM: zii-commmon: Fix NULL pointer dereference in do_rdu1_switch_reset()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/2] ARM: zii-imx8mq-dev: disable GPU and VPU power domain in DT
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/2] soc: imx: gpcv2: skip registering devices for unavailable power domains
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] fs: ubootvarfs: use correct format specifier for pointer diff
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] ARM: zii-common: setup Linux cmdline network config on RDU3
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] OF: gpio: don't warn if ignored GPIO flag matches the behavior
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] Documentation: boards: stm32mp: document boot mode strap pins
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 3/4] fs: ext4: Fix handling of sparse files
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/4] fs: ext4: remove unnecessarily clever file read
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/4] fs: ext4: return NULL instead of 0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/4] fs: ext4: Fix out of bounds memset
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/4] ext4 fixes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2 3/6] net: add Designware Ethernet QoS for STM32MP
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 4/6] net: eqos: extend Designware Ethernet QoS for Tegra 186 support
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 6/6] Documentation: boards: stm32mp: remove done TODOs
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 5/6] ARM: stm32mp: include new drivers in defconfig
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 2/6] ARM: stm32mp: dk2: add barebox SD-Card update handler
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 0/6] ARM: stm32mp: finalize second stage support
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 1/6] mci: stm32_sdmmc2: parse generic MCI oftree properties
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH v2 7/8] ARM: stm32mp: dk2: add barebox SD-Card update handler
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: remove wrong uses of timeout_cur
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2] sandbox: add_image: mmap block devices
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: remove wrong uses of timeout_cur
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] efi: populate boot source instance
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v6 1/2] Documentation: add watchdog documentation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mfd: superio: use strerrorp helper instead of open-coding
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/8] pinctrl: stm32: fix debug print of uninitialized variable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 7/8] ARM: stm32mp: dk2: add barebox SD-Card update handler
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Uefi version with 'bare metal' drivers?
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] ARM: zynqmp: add support for bitstream loading
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] mfd: superio: use strerrorp helper instead of open-coding
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 4/8] ARM: sm: document SMC/PSCI related options
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 7/8] ARM: stm32mp: dk2: add barebox SD-Card update handler
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 6/8] nvmem: add read support for STM32MP1 bsec OTP
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 8/8] ARM: stm32mp: implement SoC and boot source identification
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 1/8] pinctrl: stm32: fix debug print of uninitialized variable
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 3/8] pinctrl: stm32: parse pinctrl nodes without subnodes as well
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 5/8] ARM: stm32mp: select ARM_SMCCC always
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 2/8] pinctrl: demote dev_info on successful probes to dev_dbg
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 7/8] ARM: stm32mp: dk2: add barebox SD-Card update handler
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• rom 3eed5e64521bacd6f8e84326aa98db7402ffc6fd Mon Sep 17 00:00:00 2001
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/8] ARM: stm32mp: select ARM_SMCCC always
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 8/8] ARM: stm32mp: implement SoC and boot source identification
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 6/8] nvmem: add read support for STM32MP1 bsec OTP
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/8] ARM: sm: document SMC/PSCI related options
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/8] pinctrl: demote dev_info on successful probes to dev_dbg
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/8] pinctrl: stm32: parse pinctrl nodes without subnodes as well
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Uefi version with 'bare metal' drivers?
  • From: "aanno.trash" <aanno.trash@xxxxxxxxx>
• Re: flash barebox to NAND
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• [PATCH] test: usb: storage: Increase retries for usb_stor_transport()
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• [PATCH] usb: storage: Increase retries for usb_stor_transport()
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• [PATCH v2 4/4] firmware: zynqmp-fpga: print Xilinx bitstream header
  • From: Thomas Hämmerle <Thomas.Haemmerle@xxxxxxxxxxxxxx>
• [PATCH v2 3/4] firmware: zynqmp-fpga: introduce driver to load bitstream to FPGA
  • From: Thomas Hämmerle <Thomas.Haemmerle@xxxxxxxxxxxxxx>
• [PATCH v2 0/4] ARM: zynqmp: add support for bitstream loading
  • From: Thomas Hämmerle <Thomas.Haemmerle@xxxxxxxxxxxxxx>
• [PATCH v2 2/4] firmware-zynqmp: extend driver with fpga relavant functions
  • From: Thomas Hämmerle <Thomas.Haemmerle@xxxxxxxxxxxxxx>
• [PATCH v2 1/4] firmware-zynqmp: add macros for PMU and trustzone firmware versions
  • From: Thomas Hämmerle <Thomas.Haemmerle@xxxxxxxxxxxxxx>
• [PATCH v2] sandbox: add_image: mmap block devices
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• Re: [PATCH] sandbox: add_image: mmap block devices
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• Re: Oselas 2018.12.0 toolchain seems to break barebox for AM335x
  • From: Andreas Geisenhainer <Andreas.Geisenhainer@xxxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: remove wrong uses of timeout_cur
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] sandbox: add_image: mmap block devices
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] sandbox: add_image: mmap block devices
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• [PATCH 1/3] watchdog: remove wrong uses of timeout_cur
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/3] watchdog: add timeout_cur parameter only when poller is enabled
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/3] watchdog: rename timeout_curr to poller_timeout_curr internally
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] firmware: zynqmp-fpga: introduce driver to load bitstream to FPGA
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• Re: [PATCH 2/5] firmware-zynqmp: extend driver with fpga relavant functions
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: zynqmp: dts: move firmware node to src tree
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• [PATCH 5/5] firmware: zynqmp-fpga: print Xilinx bitstream header
  • From: Thomas Hämmerle <Thomas.Haemmerle@xxxxxxxxxxxxxx>
• [PATCH 4/5] ARM: zynqmp: dts: move pcap node to src tree
  • From: Thomas Hämmerle <Thomas.Haemmerle@xxxxxxxxxxxxxx>
• [PATCH 3/5] firmware: zynqmp-fpga: introduce driver to load bitstream to FPGA
  • From: Thomas Hämmerle <Thomas.Haemmerle@xxxxxxxxxxxxxx>
• [PATCH 1/5] ARM: zynqmp: dts: move firmware node to src tree
  • From: Thomas Hämmerle <Thomas.Haemmerle@xxxxxxxxxxxxxx>
• [PATCH 2/5] firmware-zynqmp: extend driver with fpga relavant functions
  • From: Thomas Hämmerle <Thomas.Haemmerle@xxxxxxxxxxxxxx>
• [PATCH 0/5] ARM: zynqmp: add support for bitstream loading
  • From: Thomas Hämmerle <Thomas.Haemmerle@xxxxxxxxxxxxxx>
• Re: [PATCH 1/6] Documentation: efi: emphasize watchdog deactivation on ExitBootServices
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: flash barebox to NAND
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/6] Documentation: efi: emphasize watchdog deactivation on ExitBootServices
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] efi: populate boot source instance
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v6 1/2] Documentation: add watchdog documentation
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v6 2/2] doc: watchdog: add note about danger of autoping
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH 3/6] watchdog: efi: bump down priority below default
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/6] watchdog: export API to configure watchdogs by name
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/6] Documentation: efi: emphasize watchdog deactivation on ExitBootServices
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/6] watchdog: export priority as device parameter
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/6] efi: efi-image: don't mask x86 interrupts on boot
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 6/6] commands: wd: support configuring watchdog by name
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] Documentation: add watchdog documentation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] Documentation: add watchdog documentation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] Documentation: add watchdog documentation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v5 1/2] Documentation: add watchdog documentation
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 2/2] doc: watchdog: add note about danger of autoping
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: flash barebox to NAND
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: flash barebox to NAND
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: flash barebox to NAND
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: flash barebox to NAND
  • From: Andreas Geisenhainer <Andreas.Geisenhainer@xxxxxxxxxxxx>
• flash barebox to NAND
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: [PATCH v4] libfile: copy_file: fix error handling
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] common: state: improve kconfig help text
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] partition: include partuuid string in debug string
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] sandbox: add_image: output errno string on mmap failure
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] hwrng: dev-random: always use /dev/urandom
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] MIPS: reloc: remove init of relocated bss
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] serial: efi-stdio: replace globals with handles in priv struct
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v4] libfile: copy_file: fix error handling
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• [PATCH] common: state: improve kconfig help text
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH 1/2] partition: include partuuid string in debug string
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] fs: devfs-core: do a case-insensitive compare of partuuids
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] sandbox: add_image: output errno string on mmap failure
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• Re: MFGTools from NXP
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• [PATCH 2/2] commands: passwd: suggest sandbox for offline password generation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] hwrng: dev-random: always use /dev/urandom
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 2/3] MIPS: move r4k_cache_init in to cpu_probe function
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 3/3] MIPS: reloc: init bss and cpu
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 1/3] MIPS: reloc: remove init of relocated bss
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH 1/2] serial: efi-stdio: replace globals with handles in priv struct
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] serial: efi-stdio: Add simple_text_input_ex_protocol backend
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: barebox 2019.07 ubiformat
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3] libfile: copy_file: prevent spurious error message
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3] libfile: copy_file: prevent spurious error message
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• [PATCH v3] libfile: copy_file: prevent spurious error message
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• RE: barebox 2019.07 ubiformat
  • From: "Barbier, Renaud" <renaud.barbier@xxxxxxxxx>
• RE: barebox 2019.07 ubiformat
  • From: "Barbier, Renaud" <renaud.barbier@xxxxxxxxx>
• Re: MFGTools from NXP
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] edit: replace %c for literal with literal directly
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v4] readline: make ctrl-u to work like linux console
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: stm32mp: select ARCH_HAS_RESET_CONTROLLER
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] cp: complete command help
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] efi: Fix typo in description string
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] MIPS: init cache before using it
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] libfile: copy_file: prevent spurious error message
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] console_simple: fix linking error when ARCH_HAS_CTRLC enabled
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] kbuild: remove ar-option
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] net: designware: socfpga: fix phy setup for Arria10
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: socfpga: reset-manager: fix Wmissing-prototypes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! ARM: at91: build for all SoCs when AT91_MULTI_BOARDS is selected
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: socfpga: cyclone5-system-manager.h: remove defines
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 1/3] net: designware: socfpga: fix phy setup for Arria10
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: socfpga: defconfig: enable state_drv
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: readling, ctrl-u is not working like linux console
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: MFGTools from NXP
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• [PATCH 1/3] ARM: socfpga: reset-manager: fix Wmissing-prototypes
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: socfpga: arria10-xload: fix Wmissing-prototypes
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: socfpga: clock-manager: fix Wmissing-prototypes
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH] cp: complete command help
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• [PATCH v4] readline: make ctrl-u to work like linux console
  • From: sendpatch@xxxxxx
• Re: readling, ctrl-u is not working like linux console
  • From: duhuanpeng <sendpatch@xxxxxx>
• Re: readling, ctrl-u is not working like linux console
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• Re: readling, ctrl-u is not working like linux console
  • From: duhuanpeng <sendpatch@xxxxxx>
• Re: MFGTools from NXP
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: MFGTools from NXP
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: MFGTools from NXP
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: MFGTools from NXP
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: MFGTools from NXP
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: MFGTools from NXP
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• [PATCH v2] libfile: copy_file: prevent spurious error message
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• Re: MFGTools from NXP
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: MFGTools from NXP
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• [PATCH] ARM: stm32mp: select ARCH_HAS_RESET_CONTROLLER
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fixup! mci: add support for stm32mp sd/mmc controller
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: MFGTools from NXP
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: MFGTools from NXP
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: readling, ctrl-u is not working like linux console
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• Re: readling, ctrl-u is not working like linux console
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: MFGTools from NXP
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: MFGTools from NXP
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: [PATCH v3] readline: make ctrl-u to work like linux console
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: MFGTools from NXP
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• [PATCH v3] readline: make ctrl-u to work like linux console
  • From: sendpatch@xxxxxx
• [PATCH 1/5] efi: Fix typo in description string
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 2/5] efi: retire efi_compare_guid in favor of efi_guidcmp
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 5/5] efi: silence warning about un-prototyped assembly-called functions
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 4/5] x86: include: add asmlinkage 'storage class'
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 3/5] efi: use efi_guidcmp helper where appropriate
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH] readline: make ctrl-u to work like linux console
  • From: Oleksij Rempel <fishor@xxxxxxx>
• [PATCH] readline: make ctrl-u to work like linux console
  • From: sendpatch@xxxxxx
• Re: [PATCH] readline: make ctrl-u to work like linux console
  • From: duhuanpeng <sendpatch@xxxxxx>
• [PATCH v2] MIPS: init cache before using it
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] kbuild: remove ar-option
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH] MIPS: init cache before flashing it
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: init cache before flashing it
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] readline: make ctrl-u to work like linux console
  • From: sendpatch@xxxxxx
• [PATCH] readline: make ctrl-u to work like linux console
  • From: sendpatch@xxxxxx
• [PATCH] readline: make ctrl-u to work like linux console
  • From: sendpatch@xxxxxx
• readling, ctrl-u is not working like linux console
  • From: duhuanpeng <sendpatch@xxxxxx>
• Re: setup for a working framebuffer in qemu
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH] MIPS: init cache before flashing it
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] console_simple: fix linking error when ARCH_HAS_CTRLC enabled
  • From: iu87m888m@xxxxxx
• Re: [PATCH] fix compile error when set CONFIG_CONSOLE_SIMPLE=y
  • From: duhuanpeng <iu87m888m@xxxxxx>
• [PATCH] MIPS: init cache before flashing it
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] libfile: copy_file: prevent spurious error message
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• Re: setup for a working framebuffer in qemu
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• setup for a working framebuffer in qemu
  • From: Denis Roio <jaromil@xxxxxxxx>
• Re: MFGTools from NXP
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: MFGTools from NXP
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: MFGTools from NXP
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: MFGTools from NXP
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: [PATCH 2/5] scripts: Add rsatoc tool
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/5] scripts: Add rsatoc tool
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: imx7d enable second core
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: imx7d enable second core
  • From: Giorgio Dal Molin <giorgio.nicole@xxxxxxxx>
• Re: imx7d enable second core
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: imx7d enable second core
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• imx7d enable second core
  • From: Giorgio Dal Molin <giorgio.nicole@xxxxxxxx>
• Re: [PATCH 2/5] scripts: Add rsatoc tool
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] ARM: dts: stm32mp157a-dk1: overwrite regulator for sdmmc node
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] mci: add support for stm32mp sd/mmc controller
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] ARM: stm32mp: enable ARM_AMBA
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• v2019.10.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] ARM: stm32mp: dk2: add barebox SD-Card update handler
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fixup! ARM: at91: build for all SoCs when AT91_MULTI_BOARDS is selected
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] ARM: stm32mp: dk2: add barebox SD-Card update handler
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/5] rsa: Allow to directly compile in rsa public keys
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/5] scripts: Add rsatoc tool
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/5] Allow to compile in rsa public keys directly
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/5] fit-image: Use compiled-in keys
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/5] rsa: let rsa_of_read_key() return a fully allocated key
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/5] Kbuild: Add config_filename macro from kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] ARM: stm32mp: dk2: add barebox SD-Card update handler
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] edit: replace %c for literal with literal directly
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 2/2] edit: add vi alias with vi-style bindings
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [RFC PATCH v1] edit: add vi alias with vi-style bindings
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] usb: string: Use le16_to_cpu for langid
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: erroneous behavior for iMX+GPT
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] mfd: add basic Super I/O chip helpers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: MFGTools from NXP
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• Re: erroneous behavior for iMX+GPT
  • From: "Middelschulte, Leif" <Leif.Middelschulte@xxxxxxxxxxxxx>
• Re: [PATCH 4/5] ARM: stm32mp: dk2: add barebox SD-Card update handler
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] fixup! ARM: at91: import lowlevel clock initialization from at91bootstrap
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] regulator: pfuze: remove unused driver_data
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] fixup! watchdog: add support for Fintek F718xx and, F818xx Super I/O
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: erroneous behavior for iMX+GPT
  • From: "s.hauer@xxxxxxxxxxxxxx" <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 08/12] ARM: at91: import lowlevel clock initialization from at91bootstrap
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] watchdog: add support for Fintek F718xx and, F818xx Super I/O
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 11/12] ARM: at91: add basic sama5d2 support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 04/12] ARM: at91: don't define ARCH_BAREBOX_MAX_BARE_INIT_SIZE for multi-image
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: erroneous behavior for iMX+GPT
  • From: "Middelschulte, Leif" <Leif.Middelschulte@xxxxxxxxxxxxx>
• [PATCH 05/12] ARM: at91: build for all SoCs when AT91_MULTI_BOARDS is selected
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 01/12] ARM: at91: at91sam9x5ek: squelch new dtc warning
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 00/12] ARM: at91: improve sama5 and multi-image support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 07/12] LICENSES: add BSD-1-Clause license
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 03/12] usb: gadget: at91_udc: don't depend on !ARCH_SAMA5D4
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 02/12] ARM: at91: delete no-longer needed #ifdef guards
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 08/12] ARM: at91: import lowlevel clock initialization from at91bootstrap
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 12/12] ARM: at91: add basic sama5d2-som1-ek1 support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 06/12] ARM: at91: use compressed DTB for AT91_MULTI_BOARDS
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 09/12] ARM: at91: import lowlevel dbgu UART init code from at91bootstrap
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 10/12] ARM: at91: microchip-ksz9477-evb: add debug_ll UART
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] fix compile error when set CONFIG_CONSOLE_SIMPLE=y
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: i.MX: phytec-som-imx6: phycore: fix updating pmic regulators
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] version_string: Add toolchain and build host info
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] usb: string: Use le16_to_cpu for langid
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! gpio: add DA9062 MFD gpio support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] ARMv7: mmu: fix setting eXecute Never for device memory
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] mci: add support for stm32mp sd/mmc controller
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: cache-armv7: remove superfluous instruction
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: mmu: remove no longer accurate comment
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] net: fec_imx: Fix resource rollback with regulator errors
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c-mux-pca954x: Add support for "i2c-mux-idle-disconnect"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: zii-vf610-dev: Fix bogus DDR configuration values
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: use system.h's get_cr() for cpuinfo
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] X86: lds: remove unnecessary alignments
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] command: Use array of pointers to commands
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/5] ARM: stm32mp: dk2: add barebox SD-Card update handler
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/5] Documentation: boards: stm32mp: document environment partition
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/5] fs: devfs-core: have device_find_partition search symlinks
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/5] ARM: stm32mp: dk2: rename function according to init level
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/4] ARM: stm32mp: dk2: support barebox_update and env
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/5] ARM: dts: stm32mp: add barebox-enviroment on DK boards
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] regulator: pfuze: remove unused driver_data
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] regulator: pfuze: add device_id of pfuze3001
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/4] watchdog: add support for Fintek F718xx and, F818xx Super I/O
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/4] mfd: superio: add base SMSC MFD driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/4] mfd: add basic Super I/O chip helpers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/4] mfd: superio: add Fintek MFD driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: MFGTools from NXP
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• [PATCH] fixup! gpio: add DA9062 MFD gpio support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: MFGTools from NXP
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] usb: string: Use le16_to_cpu for langid
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• MFGTools from NXP
  • From: Mihaita Ivascu <mihaita_ivascu@xxxxxxxxxxx>
• [PATCH 6/6] usb: string: Minor changes
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH 3/6] usb: string: Use dma_alloc instead of a local buffer
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH 5/6] usb: string: size_t is unsigned
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH 1/6] usb: hub: Use more accurate struct name
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH 2/6] usb: hub: Only clear port reset status if set
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH 4/6] usb: string: Use le16_to_cpu for langid
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH 3/3] ARM: mmu: use client domain permissions to support ARMv7 eXecute Never
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: mmu: set R/W bits in ARMv7 translation table
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/3] ARM: cache-armv7: remove duplicate domain initialization
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/3] ARMv7: mmu: fix setting eXecute Never for device memory
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 2/2] mci: add support for stm32mp sd/mmc controller
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 1/2] ARM: stm32mp: enable ARM_AMBA
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] ARM: cache-armv7: remove superfluous instruction
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: mmu: remove no longer accurate comment
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] net: fec_imx: Fix resource rollback with regulator errors
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 2/2] ARM: dts: imx6qdl: pfla02: Remove fec phy-supply
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• Re: [PATCH] version_string: Add toolchain and build host info
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH] version_string: Add toolchain and build host info
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/2] ARM: dts: vf610-zii-scu4-aib: Add "i2c-mux-idle-disconnect" to I2C muxes
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/2] i2c-mux-pca954x: Add support for "i2c-mux-idle-disconnect"
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] Documentation: zii-vf610-dev: Fix bogus DDR configuration values
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• erroneous behavior for iMX+GPT
  • From: "Middelschulte, Leif" <Leif.Middelschulte@xxxxxxxxxxxxx>
• [PATCH] ARM: use system.h's get_cr() for cpuinfo
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Podcast topic suggestion/tip
  • From: Craig Stadler <cstadler18@xxxxxxxxxxx>
• Re: [PATCH v2] ARM: i.MX: phytec-som-imx6: phycore: fix updating pmic regulators
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• [PATCH] fix compile error when set CONFIG_CONSOLE_SIMPLE=y
  • From: iu87m888m@xxxxxx
• Re: compile error report: CONFIG_CONSOLE_SIMPLE=y
  • From: duhuanpeng <iu87m888m@xxxxxx>
• compile error report: CONFIG_CONSOLE_SIMPLE=y
  • From: duhuanpeng <iu87m888m@xxxxxx>
• Re: [PATCH 6/7] lds: remove more unnecessary alignments
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 5/7] X86: lds: remove unnecessary alignments
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 3/7] lds: Move start/end address variables into defines
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 7/7] lds: Add and use RO_DATA_SECTION macro
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/7] lds: create and use BAREBOX_PCI_FIXUP macro
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/7] lds: Move start/end address variables into defines
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 6/7] lds: remove more unnecessary alignments
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/7] ppc: remove unused variables from linker scripts
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/7] Cleanup linker scripts
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/7] X86: lds: remove unnecessary alignments
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/7] barebox.lds: Remove unnecessary braces
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2] ARM: i.MX: phytec-som-imx6: phycore: fix updating pmic regulators
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: aarch64: save clobbered registers in __barebox_arm_entry
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: aarch64: save clobbered registers in __barebox_arm_entry
  • From: Rouven Czerwinski <rcz@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: phytec-som-imx6: phycore: fix updating pmic regulators
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• Re: [PATCH] ARM: i.MX: phytec-som-imx6: phycore: fix updating pmic regulators
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] ARM: aarch64: save clobbered registers in __barebox_arm_entry
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: stm32mp: add bootm handler for images
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: cache_64: invalidate icache in arm_early_mmu_cache_flush
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: cache_64: invalidate icache in arm_early_mmu_cache_flush
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: cache_64: invalidate icache in arm_early_mmu_cache_flush
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: phytec-som-imx6: phycore: fix updating pmic regulators
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• Re: [PATCH] ARM: i.MX: phytec-som-imx6: phycore: fix updating pmic regulators
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: phytec-som-imx6: phycore: fix updating pmic regulators
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: aarch64: add image markers to linker script
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] usb: Reduce USB scanning time
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1] MIPS: net: ag71xx/ar9331: partially sync network support with upstream
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] dtc: fix breakage of in-barebox libfdt
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] gpio: da9062: fix uninitialized variable read
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] input: specialkeys: remove unused printk argument
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: start: Cast board data to "unsigned long"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] mci: imx-esdhc-pbl: Fix watermark level value for i.MX
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: stm32mp: add bootm handler for images
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: aarch64: add image markers to linker script
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: cache_64: invalidate dcache in arm_early_mmu_cache_invalidate
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2] mci: imx-esdhc-pbl: Fix watermark level value for i.MX
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: cache_64: invalidate icache in arm_early_mmu_cache_flush
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: cache_64: invalidate dcache in arm_early_mmu_cache_invalidate
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/3] usb: Reduce USB scanning time
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• [PATCH 1/3] usb: hub_port_reset(): Speedup hub reset handling
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• [PATCH 3/3] usb: Change power-on / scanning timeout handling
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• [PATCH 2/3] usb: usb_hub_port_connect_change(): Remove unnecessary delays
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• [PATCH v1] MIPS: net: ag71xx/ar9331: partially sync network support with upstream
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] gpio: da9062: fix uninitialized variable read
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 1/2] lib: fdt: define INT32_MAX for in-barebox use
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 0/2] dtc: fix breakage of in-barebox libfdt
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 2/2] fixup! Documentation: document barebox device tree handling
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] gpio: da9062: fix uninitialized variable read
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] input: specialkeys: remove unused printk argument
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH] version_string: Add toolchain and build host info
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] version_string: Add toolchain and build host info
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] ARM: start: Cast board data to "unsigned long"
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2] mci: imx-esdhc-pbl: Fix watermark level value for i.MX
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] mci: imx-esdhc-pbl: Fix watermark level value for i.MX
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] mci: imx-esdhc-pbl: Fix watermark level value for i.MX
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: nand: nand_omap_gpmc: Fix mtd_info usage
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] state: backend_bucket_circular: harmonize code with dt-utils
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v4 0/4] Machine ID Support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] nvmem: Fix read/write access to partition devices
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] commands: ubsan: remove redundant depends
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] kbuild, LLVMLinux: Add -Werror to cc-option to support clang
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: at91: provide at91_mux_pio3_pin for use in first stage
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [BUG] Cadence QSPI broken since barebox-2019.06.0?
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• [PATCH] mci: imx-esdhc-pbl: Fix watermark level value for i.MX
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] mtd: nand: nand_omap_gpmc: Fix mtd_info usage
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• [PATCH 3/3] common: state: fix backward compatibility
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• [PATCH 2/3] state: backend_bucket_circular: fix double free()
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• [PATCH 1/3] state: backend_bucket_circular: harmonize code with dt-utils
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• [PATCH v4 2/4] common: machine_id: introduce machine id generation
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH v4 3/4] nvmem: ocotp: set unique id as machine-id hashable
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH v4 4/4] bootm: allow providing machine id to Kernel
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH v4 1/4] digest.h: needs errno definitions
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH v4 0/4] Machine ID Support
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• RE: barebox 2019.07 ubiformat
  • From: "Barbier, Renaud" <renaud.barbier@xxxxxxxxx>
• [PATCH] nvmem: Fix read/write access to partition devices
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• Re: [RFC PATCH] ARM: layerscape: zero-index DEBUG_LAYERSCAPE_UART_PORT
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: barebox 2019.07 ubiformat
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] commands: ubsan: remove redundant depends
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] kbuild, LLVMLinux: Add -Werror to cc-option to support clang
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• RE: barebox 2019.07 ubiformat
  • From: "Barbier, Renaud" <renaud.barbier@xxxxxxxxx>
• [PATCH 2/2] pinctrl: add gpio and pinctrl driver for sama5d2 PIO4
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: at91: provide at91_mux_pio3_pin for use in first stage
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v4] Documentation: add watchdog documentation
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/3] remoteproc for barebox
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: barebox 2019.07 ubiformat
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• barebox 2019.07 ubiformat
  • From: "Barbier, Renaud" <renaud.barbier@xxxxxxxxx>
• Re: [PATCH] Allow usage of default environment without environment file storage
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3] Documentation: add watchdog documentation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3] net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: dsa: mv88e6xxx: Fix error message typo
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/6] scripts/dtc: rework dtc import handling
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] Doc: i.MX: Document image structure for i.MX
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] nvmem: ocotp: set unique id as machine-id hashable
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH] imx-bbu-nand-fcb: Mark block as bad when erasing it fails
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v3] net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2] net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v3 3/4] nvmem: ocotp: set unique id as machine-id hashable
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: imx6: phycore: make use of upstream dts
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• [PATCH v3 2/4] common: machine_id: introduce machine id generation
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH v3 3/4] nvmem: ocotp: set unique id as machine-id hashable
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH v3 0/4] Machine ID Support
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH v3 4/4] bootm: allow providing machine id to Kernel
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH v3 1/4] digest.h: needs errno definitions
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH v2] blspec: skip entries that are not blspec entries
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• Re: [PATCH] blspec: skip entries that are not blspec entries
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• [PATCH v3] Documentation: add watchdog documentation
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] net: dsa: mv88e6xxx: Fix error message typo
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2] net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] blspec: skip entries that are not blspec entries
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [RFC PATCH] ARM: layerscape: zero-index DEBUG_LAYERSCAPE_UART_PORT
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] scripts/dtc: mention dtc project in update-dtc-source.sh commit message
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] scripts/dtc: Update to upstream version v1.5.0
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>