Hi all,
this converts the Zynq architecture over to the multi-image build
mechanism, which isn't exactly new anymore at this point. This isn't
too useful right now, considering that we only support a single board
from this Zynq generation and the resulting image must fit into the
on-chip RAM due to missing 2 stage loading, but it removes the
accumulated dust from the architecture support.
Regards,
Lucas
Lucas Stach (18):
ARM: zynq: zedboard: enable MACB driver in defconfig
ARM: zynq: add trivial image build mechanism
ARM: zynq: use getopt in zynq_mkimage
ARM: zynq: move header generation to zynq_mkimage
ARM: zynq: add size check in zynq_mkimage
ARM: zynq: zedboard: provide DTB
net: macb: handle more clocks
net: macb: add Zynq compatible
ARM: zynq: move clock controller driver to drivers/clk
clk: zynq: use base address of clock controller
ARM: zynq: fixup SLCR ranges
clk: zynq: improve PLL enable handling
clk: zynq: partially sync with Linux
ARM: zynq: switch to DT based probing
clk: zynq: remove clkdevs
ARM: zynq: switch to multi-image build
bootsource: add JTAG bootsource
ARM: zynq: add bootsource detection
arch/arm/Kconfig | 1 +
arch/arm/boards/avnet-zedboard/Makefile | 1 -
arch/arm/boards/avnet-zedboard/board.c | 24 --
arch/arm/boards/avnet-zedboard/flash_header.c | 62 ----
arch/arm/boards/avnet-zedboard/lowlevel.c | 10 +-
.../boards/avnet-zedboard/zedboard.zynqcfg | 24 ++
.../{zedboard_defconfig => zynq_defconfig} | 4 +-
arch/arm/dts/Makefile | 1 +
arch/arm/dts/zynq-7000.dtsi | 4 +
arch/arm/dts/zynq-zed.dts | 8 +
arch/arm/mach-zynq/Kconfig | 21 +-
arch/arm/mach-zynq/Makefile | 2 +-
arch/arm/mach-zynq/devices.c | 13 -
arch/arm/mach-zynq/include/mach/barebox.lds.h | 8 -
arch/arm/mach-zynq/include/mach/devices.h | 20 --
.../include/mach/zynq-flash-header.h | 39 +--
.../include/mach/zynq7000-header-regs.h | 49 ++++
.../mach-zynq/include/mach/zynq7000-regs.h | 1 +
arch/arm/mach-zynq/zynq.c | 30 +-
common/bootsource.c | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/zynq/Makefile | 1 +
.../clk-zynq7000.c => drivers/clk/zynq/clkc.c | 126 +++++---
drivers/net/macb.c | 25 +-
images/Makefile | 3 +-
images/Makefile.zynq | 23 ++
include/asm-generic/barebox.lds.h | 3 +-
include/bootsource.h | 1 +
scripts/Makefile | 1 +
scripts/zynq_mkimage.c | 274 ++++++++++++++++--
30 files changed, 552 insertions(+), 229 deletions(-)
delete mode 100644 arch/arm/boards/avnet-zedboard/flash_header.c
create mode 100644 arch/arm/boards/avnet-zedboard/zedboard.zynqcfg
rename arch/arm/configs/{zedboard_defconfig => zynq_defconfig} (92%)
create mode 100644 arch/arm/dts/zynq-7000.dtsi
create mode 100644 arch/arm/dts/zynq-zed.dts
delete mode 100644 arch/arm/mach-zynq/devices.c
delete mode 100644 arch/arm/mach-zynq/include/mach/barebox.lds.h
delete mode 100644 arch/arm/mach-zynq/include/mach/devices.h
create mode 100644 arch/arm/mach-zynq/include/mach/zynq7000-header-regs.h
create mode 100644 drivers/clk/zynq/Makefile
rename arch/arm/mach-zynq/clk-zynq7000.c => drivers/clk/zynq/clkc.c (69%)
create mode 100644 images/Makefile.zynq
--
2.23.0
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
