The SD card interface is still using the legacy partition binding. Change this by switching to the new bindings. Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx> --- No changes in v2 --- arch/arm/dts/imx6qdl-phytec-phycard-som.dtsi | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/arch/arm/dts/imx6qdl-phytec-phycard-som.dtsi b/arch/arm/dts/imx6qdl-phytec-phycard-som.dtsi index 51cece26837a..de07562c6884 100644 --- a/arch/arm/dts/imx6qdl-phytec-phycard-som.dtsi +++ b/arch/arm/dts/imx6qdl-phytec-phycard-som.dtsi @@ -158,16 +158,19 @@ cd-gpios = <&gpio5 22 0>; status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; - partition@0 { - label = "barebox"; - reg = <0x0 0xe0000>; - }; + partition@0 { + label = "barebox"; + reg = <0x0 0xe0000>; + }; - partition@e0000 { - label = "barebox-environment"; - reg = <0xe0000 0x20000>; + partition@e0000 { + label = "barebox-environment"; + reg = <0xe0000 0x20000>; + }; }; }; -- 2.7.4 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox