The board support is likely copied from the freescale-mx6-sabrelite, which requires some GPIOs setup before Ethernet is usable. There is no GPIOs used in this board's code, so remove the comment and along it the <gpio.h> header. Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> --- arch/arm/boards/freescale-mx6-sabresd/board.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/boards/freescale-mx6-sabresd/board.c b/arch/arm/boards/freescale-mx6-sabresd/board.c index 595b1eae0ba8..a5059835dfbc 100644 --- a/arch/arm/boards/freescale-mx6-sabresd/board.c +++ b/arch/arm/boards/freescale-mx6-sabresd/board.c @@ -19,7 +19,6 @@ #include <init.h> #include <environment.h> #include <mach/imx6-regs.h> -#include <gpio.h> #include <asm/armlinux.h> #include <generated/mach-types.h> #include <partition.h> @@ -84,8 +83,4 @@ static int sabresd_coredevices_init(void) return 0; } -/* - * Do this before the fec initializes but after our - * gpios are available. - */ coredevice_initcall(sabresd_coredevices_init); -- 2.24.0.rc1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
