U-Boot V2 Development (Barebox)

• Thread Index

• [PATCH] gpio: iopoll: implement gpio_poll_timeout_us
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• mips : How to run barebox by bootm in ram(u-boot command)?
  • From: "duhuanpeng" <iu87m888m@xxxxxx>
• Re: [PATCH] input: add handler for reset and power key input events
  • From: duhuanpeng <iu87m888m@xxxxxx>
• Re: [PATCH] input: add handler for reset and power key input events
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] input: add handler for reset and power key input events
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] mtd: spi-nor: Add support for s25fl128s0 s25fl128s1 flashes from Linux
  • From: iu87m888m@xxxxxx
• [PATCH] mtd: spi-nor: Add support for s25fl128s0 s25fl128s1 flashes from Linux
  • From: iu87m888m@xxxxxx
• [PATCH] mtd: spi-nor: Add support for s25fl128s0 s25fl128s1 flashes from Linux
  • From: iu87m888m@xxxxxx
• [PATCH 2/2] commands: go: add -m option to keep MMU on
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: allow booting with MMU enabled
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 5/6] sandbox: hostfile: allow probing from device tree
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 5/6] sandbox: hostfile: allow probing from device tree
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: zii-vf610-dev: Use CTRL-C as autoboot abort
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: vf610-zii-cfu1: Fix indentation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/3] MIPS: ath79: enable watchdog support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] images/.gitignore: ignore i.MX8MQ HAB files
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/7] clean up and complement reset source handling
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: MMC hardware partitioning
  • From: gianluca <gianlucarenzi@xxxxxxxx>
• Re: [PATCH v3] console: fix out-of-bounds read in dputc(/dev/*, ...)
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: MMC hardware partitioning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/6] mtd: nand: gpmc: Add BCH16 support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/6] net: cpsw: Make phy its own driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/6] mtd: peb: Add function to write file
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/6] mtd: nand: gpmc: Add support for ELM
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 6/6] ARM: OMAP: bbu: Add an all-in-one NAND update handler
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/6] OMAP updates
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/6] ARM: omap: am35xx_emif4: Fix bit polling
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2 10/10] sandbox: support Address and UndefinedBehavior sanitizers
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 06/10] common: add generic CONFIG_UBSAN plumbing
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 08/10] sandbox: use sanitizer unwind for dump_stack if available
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 09/10] common: add generic CONFIG_KASAN option
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 07/10] commands: add intentionally UB triggering ubsan command
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 01/10] Kconfig: create Kconfig symbol for ARCH_HAS_STACK_DUMP
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 05/10] lib: add HAVE_EFFICIENT_UNALIGNED_ACCESS Kconfig option
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 04/10] Kconfig: retire empty <asm/barebox.h>
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 02/10] Kconfig: create Kconfig symbol for ARCH_HAS_DATA_ABORT_MASK
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 00/10] Add initial support for -fsanitize={ubsan,asan}
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 03/10] blackfin: delete unused <asm/barebox.h> definitions
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 6/6] hwrng: add sandbox driver interface to host /dev/random
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 0/6] sandbox: add HWRNG driver for host /dev/random
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 5/6] sandbox: hostfile: allow probing from device tree
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 3/6] sandbox: redefine optarg and optind to avoid collisions
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 2/6] sandbox: remove unused ARCH_LINUX Kconfig symbol
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 4/6] sandbox: compile with symbol -fvisibility=hidden
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 1/6] sandbox: include header to provide missing prototype
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• MMC hardware partitioning
  • From: gianluca <gianlucarenzi@xxxxxxxx>
• Re: [PATCH 2/2] reset_source: drop reset_source_set_instance()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 2/2] reset_source: drop reset_source_set_instance()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] ARM: zii-vf610-dev: Use CTRL-C as autoboot abort
  • From: Cory Tusar <Cory.Tusar@xxxxxxxx>
• [PATCH] ARM: dts: vf610-zii-cfu1: Fix indentation
  • From: Cory Tusar <Cory.Tusar@xxxxxxxx>
• Re: [PATCH 2/2] reset_source: drop reset_source_set_instance()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v1 3/3] MIPS: ath79: enable gpio key support.
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 2/3] MIPS: dts: dpt-module: fix gpio button
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 1/3] MIPS: ath79: enable watchdog support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 01/11] linux/kbuild.h: sync with upstream
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] images/.gitignore: ignore i.MX8MQ HAB files
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 4/7] reset_source: implement helper to set a device as reset source
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 1/7] reset_source: use instance = -1 as default
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 0/7] clean up and complement reset source handling
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 3/7] reset_source: drop reset_source_set_instance()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 2/7] reset_source: fix ordering of exported functions
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 7/7] oftree: expose reset_source device in device tree
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 5/7] mfd: da9053: use new reset_source_set_device()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 6/7] mfd: da9063: use new reset_source_set_device()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/2] reset_source: drop reset_source_set_instance()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/2] reset_source: use instance = -1 as default
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] commands: fix unaligned accesses of aliased commands on amd64
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] console: fix out-of-bounds read in dputc(/dev/*, ...)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3] console: fix out-of-bounds read in dputc(/dev/*, ...)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] startup: allow ctrl+c abort during boot sequence
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/5] i.mx6: signed boot: add habv4-imx6-gencsf.h to the flash header of the PHYTEC boards
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: aarch64: Fix get_runtime_offset after relocation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: zii-vf610-dev: Fix 'halt' in openocd configuration script
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH RFC 0/3] fs: tftp: don't use cached dentries
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] console: fix out-of-bounds read in dputc(/dev/*, ...)
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] commands: fix unaligned accesses of aliased commands on amd64
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] startup: Register autoboot variables earlier
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] startup: Fix typo in comment
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 00/11] treewide: fix some ARCH=arm clang warnings
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] sandbox: support -fsanitize={address,ubsan}
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] sandbox: support -fsanitize={address,ubsan}
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: aarch64: Fix get_runtime_offset after relocation
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 0/8] i.MX8 EVK patches
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH 1/8] ARM: aarch64: Fixup relocation table for the second relocation
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: aarch64: Fix get_runtime_offset after relocation
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH 3/8] pbl: Move piggy verification into pbl_barebox_uncompress()
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH 4/8] ARM: i.MX: imx8-ddrc: Remove debug code
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH 5/8] ARM: nxp-imx8mq-evk: Remove duplicate call to imx8mq_cpu_lowlevel_init()
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH 6/8] ARM: nxp-imx8mq-evk: Replace trampoline
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH 7/8] ARM: i.MX8: Fix piggydata loading
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH 8/8] ARM: nxp-imx8mq-evk: Update comments
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 6/8] ARM: nxp-imx8mq-evk: Replace trampoline
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/8] pbl: Move piggy verification into pbl_barebox_uncompress()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/8] ARM: nxp-imx8mq-evk: Remove duplicate call to imx8mq_cpu_lowlevel_init()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 8/8] ARM: nxp-imx8mq-evk: Update comments
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 7/8] ARM: i.MX8: Fix piggydata loading
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/8] ARM: aarch64: Fixup relocation table for the second relocation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/8] ARM: i.MX: imx8-ddrc: Remove debug code
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/8] ARM: aarch64: Fix get_runtime_offset after relocation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/8] i.MX8 EVK patches
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] console: don't count newlines twice in bytes written
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] console: fix out-of-bounds read in dputc(/dev/*, ...)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] console: don't count newlines twice in bytes written
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] ratp: return 0 bytes written from puts if busy
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: i.MX: bbu: early exit when partition too small
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/4] fs: omap4_usbbootfs: remove commented out code
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/4] libfile: have write_full return a descriptive error code
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/4] startup: allow ctrl+c abort during boot sequence
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH RFC 3/3] fs: tftp: don't maintain tftp dentries in dcache
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH RFC 2/3] fs: provide no_revalidate_d_ops for network file systems
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH RFC 1/3] fs: tftp: remove duplicate header
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH RFC 0/3] fs: tftp: don't use cached dentries
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] ARM: don't use -no-thumb-interwork if unavailable
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 2/2] ata: fix mismatched header guards
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 1/2] fixup! complete: remove unused variable
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH 03/11] complete: remove unused variable
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/5] common: add generic CONFIG_UBSAN_SANITIZE_ALL plumbing
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 3/5] common: add generic CONFIG_KASAN option
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 0/5] sandbox: support -fsanitize={address,ubsan}
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 1/5] sandbox: include header to provide missing prototype
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 4/5] sandbox: support Address and UndefinedBehavior sanitizers
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 5/5] commands: fix unaligned accesses of aliased commands on amd64
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH 03/11] complete: remove unused variable
  • From: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
• [PATCH 11/11] fs: fat: fix use of wrong enumeration type
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 10/11] gui: png_lode: fix freeing of uninitialized pointer
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 04/11] i2c-mux-pca954x: remove use of uninitialized variable
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 07/11] nvme: use 64 bit types for timeouts even on 32 bit systems
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 08/11] usb: gadget: fsl_udc: remove always-true null pointer checks
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 09/11] commands: mmc_extcsd: describe missing bit
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 06/11] smc911x: fix inverted poll-for-ready
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 03/11] complete: remove unused variable
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 00/11] treewide: fix some ARCH=arm clang warnings
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 01/11] linux/kbuild.h: sync with upstream
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 05/11] net: phy: mv88e6xxx: remove duplicate member in struct initializer
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 02/11] ratp: fix use of %hu for printing int
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v4 5/5] Makefile.imx: change image creation to build_imx_habv4img for i.MX6
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v4 4/5] Makefile.imx: add build_imx_habv4img for creation of signed/encrypted images
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v4 3/5] Kconfig: add selection for creation of signed/encrypted HABV4 images
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v4 1/5] i.mx6: signed boot: add habv4-imx6-gencsf.h to the flash header of the PHYTEC boards
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v4 2/5] imx6: added fit image signature to the devicetree for PHYTEC boards
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH] startup: Register autoboot variables earlier
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• [PATCH] startup: Fix typo in comment
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH v1 4/4] spi: add atmel-quadspi support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• v2019.08.1
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 4/4] spi: add atmel-quadspi support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: socfpga: fix xload on arria10
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 4/4] spi: add atmel-quadspi support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] serial: stm32: set linux_console_name
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: zii-vf610-dev: Fix 'halt' in openocd configuration script
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] Documentation: zii-vf610-dev: Fix 'halt' in openocd configuration script
  • From: Cory Tusar <Cory.Tusar@xxxxxxxx>
• [PATCH] serial: stm32: set linux_console_name
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 4/4] spi: add atmel-quadspi support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 2/4] mtd: spi-nor: add UNLOCK_GLOBAL_BLOCK support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 3/4] mtd: spi-nor: add support for sst26vf series
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 0/4] extend support for SAMA5D27 SOM1 EK
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 1/4] serial: atmel: set linux_console_name
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] scripts/dtc: Update to upstream version v1.5.0
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] scripts/dtc: Update to upstream version v1.5.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] scripts/dtc: Update to upstream version v1.5.0
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 1/8] dtc: Update update-dtc-source.sh from Linux
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH 6/8] ARM: Add generic device tree 2nd stage support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/8] scripts/dtc: Update to upstream version v1.5.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/8] common: return "none" when board unset
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 8/8] ARM: i.MX: When generic DT image is enabled do not hardcode SoC
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/8] Compile libfdt for barebox
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/8] dtc: Update update-dtc-source.sh from Linux
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/8] pbl: Implement strrchr
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/8] Add support for a generic DT based 2nd stage ARM image
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 7/8] ARM: i.MX: Do not hang() on unknown SoCs
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/4] ARM: socfpga: fix xload on arria10
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: Arria10: achilles: add named partitions
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 2/4] ARM: Arria10: achilles: fix offsets in node names
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: achilles: add bbu handler
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] Makefile: add creation of signed/encrypted images for imx6, imx7, imx8
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] nvmem: Use helper variable in nvmem_register_cdev()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] net: macb: init multiple dummy TX queues
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] Makefile: add creation of signed/encrypted images for imx6, imx7, imx8
  • From: Maik Otto <m.otto@xxxxxxxxx>
• Re: [PATCH v1 1/2] net: macb: init multiple dummy TX queues
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 1/2] net: macb: init multiple dummy TX queues
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 2/2] net: macb: extend support to Microchip SAMA5D2
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• v2019.08.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/4] pinctrl: i.MX iomux-v1: Make base address initialization unnecessary
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/4] i.MX1/scb9328 patches
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/4] serial: i.MX: Add i.MX1 lowlevel init function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/4] pinctrl: i.MX iomux-v1: Add i.MX1 support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: i.MX: scb9328: refurbish board suport
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/5] eeprom: at24: Convert the driver to NVMEM
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 4/5] eeprom: at24: Drop at24_cdev_protect()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/5] nvmem: Use helper variable in nvmem_register_cdev()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 3/5] nvmem: Parse partitions information
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/5] nvmem: Use already existing dev pointer in nvmem_register_cdev()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v3 09/10] scripts: add nmon-loader
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v3 09/10] scripts: add nmon-loader
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Documentation: imx8mq-evk: fix typo (s/NXM/NXP/)
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] kbuild: use -fmacro-prefix-map to make __FILE__ a relative path
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] riscv: use generic bitsperlong.h
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] kconfig: update to Linux 5.3-rc3
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 09/10] scripts: add nmon-loader
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] fixup! Documentation: add imx6ull-evk boot mode documentation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] Documentation: add imx6ull-evk boot mode documentation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] Documentation: imx8mq-evk: fix typo (s/NXM/NXP/)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mtd: nand: mxs: sync page_size information
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/16] HAB for i.MX8MQ
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/16] HAB for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/16] HAB for i.MX8MQ
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] kbuild: use -fmacro-prefix-map to make __FILE__ a relative path
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH 2/2] mips: use generic bitsperlong.h
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH 1/2] riscv: use generic bitsperlong.h
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH] kconfig: update to Linux 5.3-rc3
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH] fixup! pbl: add sha256 and piggy verification to PBL
  • From: r.czerwinski@xxxxxxxxxxxxxx
• Re: [PATCH v3 10/16] pbl: add sha256 and piggy verification to PBL
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] crypto: caam - Always do rng selftest
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v3 10/16] pbl: add sha256 and piggy verification to PBL
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 15/16] mach-imx: hab: select piggy verification for i.MX8
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 13/16] arm: uncompress: verify sha256 if enabled
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 16/16] boards: nxp-mx8-evk: rework to different boot flow
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 11/16] stdio: puts and putchar static inline wrappers
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 06/16] esdhc-pbl: add piggy load function
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 14/16] mach-imx: add gencsf header for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 08/16] scripts: imx: support signing for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 09/16] images: always build sha256sum into pbl
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 12/16] pbl: support panic with log output
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 02/16] i.MX: HABv4: implement interface for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 07/16] sections: fix macro for barebox_pbl_size
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 04/16] arm: lib: add CSF section between PBL and piggy
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 03/16] mach-imx: enable HAB on i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 00/16] HAB for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 01/16] i.MX: HABv4: ignore return for i.MX28/6 initcalls
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 05/16] esdhc-pbl: extract header parsing from image start
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH] crypto: caam - Always do rng selftest
  • From: Rouven Czerwinski <rouven@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] Makefile: add creation of signed/encrypted images for imx6, imx7, imx8
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH] crypto: caam - Always do rng selftest
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH] crypto: caam - Always do rng selftest
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 16/16] boards: nxp-mx8-evk: rework to different boot flow
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH v2 10/16] pbl: add sha256 and piggy verification to PBL
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH v2 09/16] images: always build sha256sum into pbl
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] Makefile: add creation of signed/encrypted images for imx6, imx7, imx8
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH v2 09/16] images: always build sha256sum into pbl
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 7/8] mtd: nand: Add function to parse device tree properties
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/8] mtd: nand-mxs: change API between NAND driver and fcb code
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 6/8] mtd: nand-mxs: inline only once used function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/8] mtd: nand-mxs: calculate ecc_strength only once
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/8] mtd: nand-mxs: Make locally used variable static
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/8] mtd: nand-mxs: Make ecc strength configurable via device tree
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/8] mtd: nand-mxs: consistently rename struct nand_chip * to "chip"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 8/8] mtd: nand-mxs: Make ecc strength configurable via device tree
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/8] mtd: nand-mxs: pass mtd_info to mxs_nand_get_mark_offset()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 02/16] i.MX: HABv4: implement interface for i.MX8MQ
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! Documentation: boards: add initial STM32MP documentation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] docs: Use a proper name for AM335x defconfig
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] Makefile: add creation of signed/encrypted images for imx6, imx7, imx8
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 10/16] pbl: add sha256 and piggy verification to PBL
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v2 13/16] arm: uncompress: verify sha256 if enabled
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v2 15/16] mach-imx: hab: select piggy verification for i.MX8
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v2 16/16] boards: nxp-mx8-evk: rework to different boot flow
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mtd: nand: mxs: sync page_size information
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: spi-nor: fix page offset/remains calculation in spi_nor_write
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2 16/16] boards: nxp-mx8-evk: rework to different boot flow
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 14/16] mach-imx: add gencsf header for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 09/16] images: always build sha256sum into pbl
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 12/16] pbl: support panic with log output
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 15/16] mach-imx: hab: select piggy verification for i.MX8
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 10/16] pbl: add sha256 and piggy verification to PBL
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 13/16] arm: uncompress: verify sha256 if enabled
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 11/16] stdio: puts and putchar static inline wrappers
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 08/16] scripts: imx: support signing for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 07/16] sections: fix macro for barebox_pbl_size
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 05/16] esdhc-pbl: extract header parsing from image start
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 06/16] esdhc-pbl: add piggy load function
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 04/16] arm: lib: add CSF section between PBL and piggy
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 01/16] i.MX: HABv4: ignore return for i.MX28/6 initcalls
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 02/16] i.MX: HABv4: implement interface for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 00/16] HAB for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 03/16] mach-imx: enable HAB on i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH] console: return number of characters written in fops_write
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] console: don't count newlines twice in bytes written
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] ratp: return 0 bytes written from puts if busy
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] fixup! Documentation: boards: add initial STM32MP documentation
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] docs: Use a proper name for AM335x defconfig
  • From: Jan Kundrát <jan.kundrat@xxxxxxxxx>
• Re: [PATCH] mtd: spi-nor: fix page offset/remains calculation in spi_nor_write
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH] mtd: spi-nor: fix page offset/remains calculation in spi_nor_write
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH] console: fix out-of-bounds read in dputc(/dev/*, ...)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] console: fix out-of-bounds read in dputc(/dev/*, ...)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] console: don't count newlines twice in bytes written
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] ratp: return 0 bytes written from puts if busy
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] console: fix out-of-bounds read in dputc(/dev/*, ...)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] console: fix out-of-bounds read in dputc(/dev/*, ...)
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH] console: fix out-of-bounds read in dputc(/dev/*, ...)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] console: fix out-of-bounds read in dputc(/dev/*, ...)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] mtd: nand: mxs: add helper to calculate the page size
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 2/2] mtd: nand: mxs: sync page_size information
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: Holidays
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Holidays
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] nvmem: ocotp: set unique id as machine-id hashable
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] digest.h: needs errno definitions
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] clk: imx6: fix use of cpu_is_mx6* before they are initialized
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] mtd: nand: Add ecc parameters as device parameters
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: ubi: Max out default wear-leveling threshold
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• Re: [PATCH] mtd: ubi: Max out default wear-leveling threshold
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: ubi: Max out default wear-leveling threshold
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• Re: [PATCH v3 4/6] clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH v3 4/4] Makefile: add creation of signed/encrypted images for imx6, imx7, imx8
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v3 3/4] Kconfig: add selection for creation of signed/encrypted HABV4 images
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v3 2/4] imx6: added fit image signature to the devicetree for PHYTEC boards
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v3 1/4] i.mx6: signed boot: add habv4-imx6-gencsf.h to the flash header of the PHYTEC boards
  • From: Maik Otto <m.otto@xxxxxxxxx>
• Re: [PATCH] UBI: silence erroneous GCC warning about uninitialized read
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] clk: imx6: fix use of cpu_is_mx6* before they are initialized
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 3/6] clk: imx6: remove quirky clk_set_parent(LDB_diN_sel, pll5_video_div)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 6/6] clk: imx6: define an enum for ldb mux inputs
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 4/6] clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 2/6] clk: imx6: Mask mmdc_ch1 handshake for periph2_sel and mmdc_ch1_axi_podf
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 0/6] clk: imx6: work around LDB hang caused by ERR009219
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 5/6] clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 1/6] clk: imx6: fix use of cpu_is_mx6* before they are initialized
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] imx6: added fit image signature to the devicetree for PHYTEC boards
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] Makefile: add creation of signed/encrypted images for imx6, imx7, imx8
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v2 3/4] Kconfig: add selection for creation of signed/encrypted HABV4 images
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v2 2/4] imx6: added fit image signature to the devicetree for PHYTEC boards
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v2 1/4] i.mx6: signed boot: add habv4-imx6-gencsf.h to the flash header of the PHYTEC boards
  • From: Maik Otto <m.otto@xxxxxxxxx>
• Re: [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] nvmem: ocotp: set unique id as machine-id hashable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] OF: gpio: Add special quirk to parse regulator flags
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: Fix global_variable_offset() for aarch64
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: Fix global_variable_offset() for aarch64
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/5] ARM: Fix global_variable_offset() for aarch64
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/5] ARM: zii-imx8mq-dev: Do setup_c() before accessing global variables
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/5] ARM: phyCORE-i.MX8M SOM: Do setup_c() before accessing global variables
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/5] ARM: nxp-imx8mq-evk: Do setup_c() before accessing global variables
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/5] ARM: access __boot_cpu_mode with a function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] nvmem: ocotp: set unique id as machine-id hashable
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH 1/3] digest.h: needs errno definitions
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] arm: port imx28-evk to devicetree
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] OF: gpio: Add special quirk to parse regulator flags
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] net: fec_imx: add regulator support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] Documentation: boards: add initial STM32MP documentation
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH] ubiformat: improve generation of UBI image sequence
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] ubiformat: Fix wrong error tests
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] UBI: silence erroneous GCC warning about uninitialized read
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] mtd: peb: Do not mark as bad in mtd_peb_torture()
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/3] ubiformat: handle write errors correctly
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] mtd: peb: Do not mark as bad in mtd_peb_torture()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] mtd: ubi: mark PEBs as bad on erase failure
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ubiformat: improve generation of UBI image sequence
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] dts/imx25: drop sram node
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: stm32mp: fix some misnomers/typos
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/7] gpio: allow for arch-specific ARCH_NR_GPIOS > 256
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] dts/imx25: drop sram node
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] fixup! Documentation: boards: add initial STM32MP documentation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/5] images: add support for generating STM32MP images
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/5] Documentation: boards: add initial STM32MP documentation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/5] filetype: add STM32 image type
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/5] ARM: stm32mp: fix some misnomers/typos
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/5] ARM: stm32mp: generate STM32 images
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: MII command to read and write specific registers
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: MII command to read and write specific registers
  • From: Benjamin Beckmeyer <beb@xxxxxxxxxxxx>
• Re: [PATCH v2 1/8] ARM: phytec-som-imx6: Add low cost variant for imx6dl phycore
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: eMMC probe in imx8mm
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] i2c: add stm32f7 I2C adapter driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: MII command to read and write specific registers
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• MII command to read and write specific registers
  • From: Benjamin Beckmeyer <beb@xxxxxxxxxxxx>
• Re: eMMC probe in imx8mm
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: ubi: Max out default wear-leveling threshold
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• Re: [PATCH v2 1/8] ARM: phytec-som-imx6: Add low cost variant for imx6dl phycore
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• v2019.07.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: ubi: Max out default wear-leveling threshold
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-phytec-state: Add backend-storage-type
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: stm32_iwdg: remove left-over comment
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/8] ARM: phytec-som-imx6: Add low cost variant for imx6dl phycore
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] usb: imx-usb-phy: select syscon driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] fixup! reset: add reset controller driver for STM32 RCC
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/7] i2c: add stm32f7 I2C adapter driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 7/7] watchdog: add support for STPMIC1 integrated watchdog
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/7] reset: add reset controller driver for STM32 RCC
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 6/7] mfd: add support for STPMIC1
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/7] ARM: dts: stm32mp157c: correct gpioz id
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/7] gpio: allow for arch-specific ARCH_NR_GPIOS > 256
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/7] ARM: stm32mp: set CONFIG_ARCH_NR_GPIO = (26 * 16)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] watchdog: stm32_iwdg: remove left-over comment
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] mtd: ubi: Max out default wear-leveling threshold
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH] ARM: dts: am335x-phytec-state: Add backend-storage-type
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 8/8] ARM: dts: imx6ul: phycore: Add phyCORE-i.MX 6ULL with eMMC
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 7/8] ARM: dts: imx6ul: phycore: Add support for eMMC
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 3/8] ARM: dts: imx6ul: phycore: Add eeprom label
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 5/8] ARM: imx6ul: phycore: Prepare for eMMC module
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 4/8] ARM: dts: imx6ul: phycore: Add state framework
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 2/8] ARM: dts: imx6qdl: phycore: Add state framework
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 6/8] ARM: phytec-som-imx: imx6ul: Add eMMC support
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 1/8] ARM: phytec-som-imx6: Add low cost variant for imx6dl phycore
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• Re: Oselas 2018.12.0 toolchain seems to break barebox for AM335x
  • From: Andreas Geisenhainer <Andreas.Geisenhainer@xxxxxxxxxxxx>
• Re: Oselas 2018.12.0 toolchain seems to break barebox for AM335x
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] net: cpsw: adopt to upstream device tree changes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] pinctrl: stm32: add debug output in set_state callback
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] arm: port imx28-evk to devicetree
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] net: fec_imx: add regulator support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: eMMC probe in imx8mm
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] lib: Add missing arguments to memcpy_parse_options()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: dts: imx6qdl: phycore: Add state framework
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• [PATCH 1/2] pstore: Only capture log messages
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] pstore: remove unused code
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/8] ARM: dts: imx6ul: phycore: Add state framework
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: dts: imx6qdl: phycore: Add state framework
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: dts: imx6qdl: phycore: Add state framework
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH] lib: Add missing arguments to memcpy_parse_options()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: memcmp command is broken
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Oselas 2018.12.0 toolchain seems to break barebox for AM335x
  • From: Andreas Geisenhainer <Andreas.Geisenhainer@xxxxxxxxxxxx>
• [PATCH 1/2] pinctrl: stm32: add debug output in set_state callback
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] pinctrl: stm32: fix error path when gpio chip is not found
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] arm: port imx28-evk to devicetree
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH 2/2] net: fec_imx: add regulator support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: mach-imx: imx6: Read and print the UID of i.MX6 SOCs
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts: add mips-relocs to .gitignore
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] scripts: add mips-relocs to .gitignore
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• eMMC probe in imx8mm
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• memcmp command is broken
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH v2] ARM: mach-imx: imx6: Read and print the UID of i.MX6 SOCs
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• v2019.06.1
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 00/12] ARM: stm32mp: add drivers for GPIO, pinctrl
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] clk: divider: export clk_div_mask() helper
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts: socfgpa_import_preloader: simplify procedure
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: imx6qdl: phycore: Set phy-reset-duration for fec
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] sandbox fixes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] blspec: invalidate only necessary bootm variables
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: mach-imx: imx6: Read and print the UID of i.MX6 SOCs
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/4] startup: Factor out the autoboot counter to separate function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/4] startup: Create global.linux.bootargs.dyn.* variables where they are needed
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/4] startup: Create boot related variables where they are used
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/4] startup: remove unused editcmd variable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 00/12] ARM: stm32mp: add drivers for GPIO, pinctrl
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v1 00/12] ARM: stm32mp: add drivers for GPIO, pinctrl
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] clk: divider: export clk_div_mask() helper
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH] scripts: socfgpa_import_preloader: simplify procedure
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: imx6qdl: phycore: Set phy-reset-duration for fec
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 2/2] ARM: dts: imx6ul: phycore: Reduce eth drive strength
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 8/8] ARM: dts: imx6ul: phycore: Add phyCORE-i.MX 6ULL with eMMC
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 6/8] ARM: phytec-som-imx: imx6ul: Add eMMC support
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 7/8] ARM: dts: imx6ul: phycore: Add support for eMMC
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 5/8] ARM: imx6ul: phycore: Prepare for eMMC module
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 4/8] ARM: dts: imx6ul: phycore: Add state framework
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 3/8] ARM: dts: imx6ul: phycore: Add eeprom label
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 2/8] ARM: dts: imx6qdl: phycore: Add state framework
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 1/8] ARM: phytec-som-imx6: Add low cost variant for imx6dl phycore
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 3/3] sandbox: drop blank lines at EOF
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 2/3] sandbox: eliminale no previous prototype for ‘sandbox_add_device’ warning
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 0/3] sandbox fixes
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 1/3] sandbox: prevent segfault in tap_alloc()
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 2/2] f_fastboot: remove only image from bootm variables
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 1/2] blspec: invalidate only necessary bootm variables
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH] ARM: mach-imx: imx6: Read and print the UID of i.MX6 SOCs
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• Re: [PATCH] mips: reloc: remove outdated comment
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: socfpga: terasic-de0-nano-soc: update handoff files to 18.1
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] serial: ns16550: support reg-offset device-tree property
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mfd: syscon: add syscon_regmap_lookup_by_phandle()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] clk: divider: Remove unused variable in clk_divider_recalc_rate
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 07/13] scripts: imx: support signing for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH v2] treewide: remove CONFIG_DEBUG_INFO from defconfigs
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH] mips: reloc: remove outdated comment
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: reloc: make flush_cache_all() usable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 10/13] arm: uncompress: verify sha256 if enabled
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 10/13] arm: uncompress: verify sha256 if enabled
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: socfpga: terasic-de0-nano-soc: add missing SECT() macro for iocsr_scan_chain3_table
  • From: Gwenhael Goavec-Merou <gwenj@xxxxxxxxxxxxxx>
• [PATCH 1/3] ARM: socfpga: terasic-de0-nano-soc: update handoff files to 18.1
  • From: Gwenhael Goavec-Merou <gwenj@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: socfpga: terasic-de0-nano-soc: statify sys_mgr_init_table
  • From: Gwenhael Goavec-Merou <gwenj@xxxxxxxxxxxxxx>
• [PATCH] serial: ns16550: support reg-offset device-tree property
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH] mfd: syscon: add syscon_regmap_lookup_by_phandle()
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH 1/3] clk: divider: Remove unused variable in clk_divider_recalc_rate
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH 3/3] clk: divider: Make generic for usage elsewhere
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH 2/3] clk: divider: Fix best div calculation for power-of-two and table dividers
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [RFC] sandbox: prevent segfault in tap_alloc()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: reloc: make flush_cache_all() usable
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [RFC] sandbox: prevent segfault in tap_alloc()
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: bugfix: _barebox_image_size wrong if enable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: rpi: use sdhost for eMMC access on CM3.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v4 0/2] add JTAG debugging support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: AW: load BL31 on imx8mm and imx8mq
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• Re: [PATCH 01/13] hab: implement interface for i.MX8MQ
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: AW: load BL31 on imx8mm and imx8mq
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• AW: load BL31 on imx8mm and imx8mq
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• Re: bugfix: _barebox_image_size wrong if enable
  • From: 张忠山 <zzs213@xxxxxxx>
• Re: load BL31 on imx8mm and imx8mq
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH] ARM: rpi: use sdhost for eMMC access on CM3.
  • From: Tomaz Solc <tomaz.solc@xxxxxxxxxx>
• load BL31 on imx8mm and imx8mq
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• Re: [PATCH 10/13] arm: uncompress: verify sha256 if enabled
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 07/13] scripts: imx: support signing for i.MX8MQ
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 01/13] hab: implement interface for i.MX8MQ
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: bugfix: _barebox_image_size wrong if enable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC] sandbox: prevent segfault in tap_alloc()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i.MX: HABv4: use min_t instead of min
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] images: update gitignore for imx signed images
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 01/10] ARM: i.MX: zii-vf610-dev-rev-b: Use SPDX tag in DTS
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] MIPS: misc patches
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: reloc: make flush_cache_all() usable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: gpio: fix sda/scl-gpios property support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 13/13] boards: nxp-mx8-evk: rework to different boot flow
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 11/13] mach-imx: add gencsf header for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 08/13] images: always build sha256sum into pbl
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 12/13] mach-imx: hab: select piggy verification for i.MX8
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 09/13] pbl: add sha256 and piggy verification to PBL
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 06/13] sections: fix macro for barebox_pbl_size
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 10/13] arm: uncompress: verify sha256 if enabled
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 07/13] scripts: imx: support signing for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 04/13] esdhc-pbl: extract header parsing from image start
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 05/13] esdhc-pbl: add piggy load function
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 02/13] mach-imx: enable HAB on i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 03/13] arm: lib: add CSF section between PBL and piggy
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 00/13] HAB for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 01/13] hab: implement interface for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: Bringup Barebox on imx8mm
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• [PATCH 2/2] i.MX: HABv4: Reset index variable after error type
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 1/2] i.MX: HABv4: use min_t instead of min
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH] images: ignore i.MX signed (USB) images and outputs of imx-csf tool
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH] images: ignore i.MX signed (USB) images and outputs of imx-csf tool
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH] images: ignore i.MX signed (USB) images and outputs of imx-csf tool
  • From: Denis OSTERLAND <denis.osterland@xxxxxxxxx>
• [PATCH] images: ignore i.MX signed (USB) images and outputs of imx-csf tool
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH v4 2/2] add gdb helper scripts to load barebox symbols
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 0/2] add JTAG debugging support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 1/2] add CONFIG_PBL_BREAK option
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: bugfix: _barebox_image_size wrong if enable
  • From: 张忠山 <zzs213@xxxxxxx>
• [PATCH] images: update gitignore for imx signed images
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 10/10] ARM: zii-imx7d-dev: Add support for RMU2 board
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 09/10] ARM: imx7d-zii-rpu2: Switch to using kernel DTS
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 08/10] ARM: Rename zii-imx7d-rpu2 to zii-imx7d-dev
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 06/10] Documentation: zii-vf610-dev: Reconcile DDR setup with DCD
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 07/10] Documentation: zii: Fix buggy check_bits_set_32
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 05/10] Documentation: zii-vf610-dev: Add necessary post reset delay
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 04/10] ARM: i.MX: zii-vf610-dev-rev-c: Fix DTS warning
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 03/10] ARM: i.MX: zii-vf610-dev-rev-b: Fix DTS warning
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 02/10] ARM: i.MX: zii-vf610-dev-rev-c: Use SPDX tag in DTS
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 01/10] ARM: i.MX: zii-vf610-dev-rev-b: Use SPDX tag in DTS
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 4/4] MIPS: dts: tplink-mr3020: add missing stdout-path property
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH 4/4] MIPS: dts: tplink-mr3020: add missing stdout-path property
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH 4/4] MIPS: dts: tplink-mr3020: add missing stdout-path property
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 3/4] serial: ar933x: set linux_console_name
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 1/4] MIPS: Kconfig: move ARCH_TEXT_BASE to top mips Kconfig file
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 2/4] Documentation: user manual: update MIPS-specific targets
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 0/4] MIPS: misc patches
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] MIPS: reloc: make flush_cache_all() usable
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2] treewide: remove CONFIG_DEBUG_INFO from defconfigs
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH v2] treewide: remove CONFIG_DEBUG_INFO from defconfigs
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [RFC 0/2] MIPS: fix code relocation routine
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 00/12] ARM: stm32mp: add drivers for GPIO, pinctrl
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] treewide: remove CONFIG_DEBUG_INFO from defconfigs
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] treewide: remove CONFIG_DEBUG_INFO from defconfigs
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v2] treewide: remove CONFIG_DEBUG_INFO from defconfigs
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] treewide: remove CONFIG_DEBUG_INFO from defconfigs
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC] sandbox: prevent segfault in tap_alloc()
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v3 0/4] ARM: stm32mp: implement watchdog/reset handling
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] i2c: gpio: fix sda/scl-gpios property support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] kconfig: update to Linux 5.2-rc4
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] i2c: gpio: add sda/scl-gpios property support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] i2c: gpio: add sda/scl-gpios property support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: Raspberry CM3 eMMC Boot
  • From: Tomaž Šolc <tomaz.solc@xxxxxxxxxx>
• Re: [RFC 2/2] MIPS: relocate_code: fix barebox image memcpy() size
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] i2c: gpio: add sda/scl-gpios property support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: bugfix: _barebox_image_size wrong if enable
  • From: 张忠山 <zzs213@xxxxxxx>
• [RFC 1/2] MIPS: lib/Makefile: fix whitespaces
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 0/2] MIPS: fix code relocation routine
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 2/2] MIPS: relocate_code: fix barebox image memcpy() size
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: Raspberry CM3 eMMC Boot
  • From: Rico Pahlisch <rico.pahlisch@xxxxxxxxxxxx>
• Re: [PATCH 0/4] Overall small fixes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: user: suggest U-Boot's bootm, not go
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Raspberry CM3 eMMC Boot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: bugfix: _barebox_image_size wrong if enable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] kconfig: update to Linux 5.2-rc4
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH] kconfig: update to Linux 5.2-rc4
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 08/12] ARM: stm32mp157c-dk2: add board-specific sysconf fixups
  • From: Rouven Czerwinski <rcz@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] common: boot: Instantiate storage for global.boot.machine_id
  • From: Cory Tusar <Cory.Tusar@xxxxxxxx>
• Re: [PATCH v2 3/6] watchdog: add stm32 watchdog and reset driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v1 08/12] ARM: stm32mp157c-dk2: add board-specific sysconf fixups
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] ARM: stm32mp1: rerun savedefconfig on stm32mp_defconfig
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 05/12] pinctrl: add driver for STM32 GPIO and pin multiplexer
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 11/12] ARM: stm32mp: implement PSCI support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 02/12] ARM: dts: stm32mp: factor out common DK nodes into dtsi
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 12/12] ARM: stm32mp157c-dk2: boot kernel in nonsecure mode
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 10/12] ARM: sm: move get_gicd_base_address to header for reuse
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 06/12] ARM: dts: stm32mp157a-dk1: enable heartbeat and error LEDs
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 08/12] ARM: stm32mp157c-dk2: add board-specific sysconf fixups
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 00/12] ARM: stm32mp: add drivers for GPIO, pinctrl
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 09/12] ARM: psci: fix erroneous call of ->system_reset on system_off
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 04/12] driver: add stubs for hardware spinlocks
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 07/12] ARM: stm32mp: turn on GPIO related options
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 01/12] ARM: dts: stm32mp157a-dk1.dts: include upstream dts before barebox'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 03/12] gpiolib: add gpio_get_chip helper
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 3/4] watchdog: add stm32 watchdog and reset driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 4/4] ARM: stm32mp: enable watchdog in defconfig
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 2/4] Documentation: reset-reason: document new BROWNOUT reason
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 0/4] ARM: stm32mp: implement watchdog/reset handling
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 1/4] ARM: stm32mp1: rerun savedefconfig on stm32mp_defconfig
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] Documentation: user: suggest U-Boot's bootm, not go
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• bugfix: _barebox_image_size wrong if enable
  • From: 张忠山 <zzs213@xxxxxxx>
• Raspberry CM3 eMMC Boot
  • From: Rico Pahlisch <rico.pahlisch@xxxxxxxxxxxx>
• Re: [PATCH] usb: usb251xb: fix optional reset gpio request
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: zii-vf610-dev: Trivial spelling fix
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] pcf857x: fix CONFIG_OF to OFDEVICE
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] common: boot: Instantiate storage for global.boot.machine_id
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: spi-nor: Add support for ISSI flashes from Linux
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC] request_sdram_region: print error message
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/4] ARM: phytec-som-imx6: update automount net entries
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 3/4] commands: mmc_extcsd: fix extcsd value meanings
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 4/4] i2c: gpio: add sda/scl-gpios property support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 0/4] Overall small fixes
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 2/4] defaultenv-2: net: fix comment
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] usb: usb251xb: fix optional reset gpio request
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: Bringup Barebox on imx8mm
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• Re: [PATCH] kconfig: update to Linux 5.2-rc4
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH] MIPS: fix 'assignment makes integer from pointer without a cast' warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] kconfig: update to Linux 5.2-rc4
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: zii-vf610-dev: Trivial spelling fix
  • From: Cory Tusar <Cory.Tusar@xxxxxxxx>
• [PATCH] pcf857x: fix CONFIG_OF to OFDEVICE
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 1/2] common: boot: Instantiate storage for global.boot.machine_id
  • From: Cory Tusar <Cory.Tusar@xxxxxxxx>
• [PATCH 2/2] common: blspec: Both environment and config file machine-id must match
  • From: Cory Tusar <Cory.Tusar@xxxxxxxx>
• [PATCH 0/2] Fix machine-id operation
  • From: Cory Tusar <Cory.Tusar@xxxxxxxx>
• [PATCH] mtd: spi-nor: Add support for ISSI flashes from Linux
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Bringup Barebox on imx8mm
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Bringup Barebox on imx8mm
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• [RFC] request_sdram_region: print error message
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] MIPS: fix 'assignment makes integer from pointer without a cast' warning
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: Strange behaviour of 'exit' command
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] pbl: report decompression failure
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] kbuild: do not drop -I without parameter
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] watchdog: add stm32 watchdog and reset driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] treewide: remove stale mentions of CONFIG_OF in comments
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] commands: don't use stale errno when calling fb_open
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] plathome-openblocks-a6: use image format 0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] startup: execute /env/bin/init as part of the initial shell
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Strange behaviour of 'exit' command
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Re: [PATCH] startup: Do not overwrite global.linux.bootargs.console
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH] startup: execute /env/bin/init as part of the initial shell
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• [PATCH] startup: Do not overwrite global.linux.bootargs.console
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Environment variables set by /env/bin/init disappear when script exits
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: zii-rdu2: disable eth0 and eth1
  • From: Vivien Didelot <vivien.didelot@xxxxxxxxx>
• Re: [PATCH] ARM: zii-rdu2: disable eth0 and eth1
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: Environment variables set by /env/bin/init disappear when script exits
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Environment variables set by /env/bin/init disappear when script exits
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Re: [PATCH] ARM: zii-rdu2: disable eth0 and eth1
  • From: Vivien Didelot <vivien.didelot@xxxxxxxxx>
• Re: [PATCH v2 3/6] watchdog: add stm32 watchdog and reset driver
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] watchdog: add stm32 watchdog and reset driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] watchdog: add stm32 watchdog and reset driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] watchdog: add stm32 watchdog and reset driver
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: zii-rdu2: disable eth0 and eth1
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] kconfig: update to Linux 5.2-rc4
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH] pbl: report decompression failure
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH] kbuild: do not drop -I without parameter
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH v2 3/6] watchdog: add stm32 watchdog and reset driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 6/6] ARM: stm32mp: add entry point, not point.pblb to pblb-y
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 4/6] ARM: stm32mp: enable watchdog in oftree and defconfig
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 0/6] ARM: stm32mp: implement watchdog/reset handling
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 5/6] ARM: stm32mp: stm32mp157c-dk2: compress the DTB
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 2/6] reset_source: add new Brownout reset (BOR) source
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 1/6] ARM: stm32mp1: rename to stm32mp
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• v2019.06.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] treewide: remove stale mentions of CONFIG_OF in comments
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] plathome-openblocks-a6: use image format 0
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>