Currently the the driver don't handle any error and return immediately. Handling the errors correctly is a must to support defered probing. Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx> --- drivers/mci/imx-esdhc.c | 30 ++++++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-) diff --git a/drivers/mci/imx-esdhc.c b/drivers/mci/imx-esdhc.c index f71ca539ed..db3450a26d 100644 --- a/drivers/mci/imx-esdhc.c +++ b/drivers/mci/imx-esdhc.c @@ -653,20 +653,24 @@ static int fsl_esdhc_probe(struct device_d *dev) dma_set_mask(dev, DMA_BIT_MASK(32)); host->clk = clk_get(dev, socdata->clkidx); - if (IS_ERR(host->clk)) - return PTR_ERR(host->clk); + if (IS_ERR(host->clk)) { + ret = PTR_ERR(host->clk); + goto err_free; + } ret = clk_enable(host->clk); if (ret) { dev_err(dev, "Failed to enable clock: %s\n", strerror(ret)); - return ret; + goto err_clk_put; } host->dev = dev; iores = dev_request_mem_resource(dev, 0); - if (IS_ERR(iores)) - return PTR_ERR(iores); + if (IS_ERR(iores)) { + ret = PTR_ERR(iores); + goto err_clk_disable; + } host->regs = IOMEM(iores->start); caps = esdhc_read32(host, SDHCI_CAPABILITIES); @@ -709,7 +713,21 @@ static int fsl_esdhc_probe(struct device_d *dev) dev->priv = host; - return mci_register(&host->mci); + ret = mci_register(&host->mci); + if (ret) + goto err_release_res; + + return 0; + +err_release_res: + release_region(iores); +err_clk_disable: + clk_disable(host->clk); +err_clk_put: + clk_put(host->clk); +err_free: + free(host); + return ret; } static struct esdhc_soc_data esdhc_imx25_data = { -- 2.20.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox