Hi Ahmad, On Thu, Sep 12, 2019 at 08:54:11AM +0200, Ahmad Fatoum wrote: > This board is produced by Embest/Element 14 and is based on i.MX6 Dual. > > For more informations on this board : > http://www.embest-tech.com/shop/star/marsboard.html > > Signed-off-by: Eric Bénard <eric@xxxxxxxxxx> > Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> > --- [...] +1 for good docu. It's really nice to have the boot jumpers documented. > +Flashing barebox > +---------------- > + > + 1. Connect to the boards's Debug Mini-USB (115200 8N1) > + > + 2. Set ``SW1 = 01`` for serial boot mode (see above) > + > + 3. Turn board's power on; > + > + 4. Upload barebox image to the board via imx-usb-loader > + > +.. code-block:: none > + > + host$ imx-usb-loader images/barebox-embest-imx6q-marsboard.img > +.. > + > + 4. Flash barebox to SPI-NOR Flash via Android Fastboot > + > +.. code-block:: none > + > + target$ fastboot flash bbu-spiflash images/barebox-embest-imx6q-marsboard.img 'target' -> 'host', because the fastboot command is also executed on the host machine, like the 'imx-usb-loader' command. Apart from that Tested-by: Stefan Lengfeld <contact@xxxxxxxxxxxxxxx> for both patches. Kind regards, Stefan [Mostly by accident I got hold of a MarS Board just a few days ago ;-)] _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
