Hello Stefan, On 9/15/19 10:01 PM, Stefan Lengfeld wrote: > Hi Ahmad, > > On Thu, Sep 12, 2019 at 08:54:11AM +0200, Ahmad Fatoum wrote: >> This board is produced by Embest/Element 14 and is based on i.MX6 Dual. >> >> For more informations on this board : >> http://www.embest-tech.com/shop/star/marsboard.html >> >> Signed-off-by: Eric Bénard <eric@xxxxxxxxxx> >> Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> >> --- > [...] > > +1 for good docu. It's really nice to have the boot jumpers documented. > >> +Flashing barebox >> +---------------- >> + >> + 1. Connect to the boards's Debug Mini-USB (115200 8N1) >> + >> + 2. Set ``SW1 = 01`` for serial boot mode (see above) >> + >> + 3. Turn board's power on; >> + >> + 4. Upload barebox image to the board via imx-usb-loader >> + >> +.. code-block:: none >> + >> + host$ imx-usb-loader images/barebox-embest-imx6q-marsboard.img >> +.. >> + >> + 4. Flash barebox to SPI-NOR Flash via Android Fastboot >> + >> +.. code-block:: none >> + >> + target$ fastboot flash bbu-spiflash images/barebox-embest-imx6q-marsboard.img > > 'target' -> 'host', because the fastboot command is also executed on the > host machine, like the 'imx-usb-loader' command. I've sent out a fixup. > > Apart from that > > Tested-by: Stefan Lengfeld <contact@xxxxxxxxxxxxxxx> > > for both patches. Thanks for trying it out. Sascha, could you squash in the Tested-By when applying the fixup? Thanks. > > Kind regards, > Stefan > > [Mostly by accident I got hold of a MarS Board just a few days ago ;-)] > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
