On Thu, Sep 12, 2019 at 08:54:10AM +0200, Ahmad Fatoum wrote: > I've picked up v1 of the patch from here: > https://barebox.infradead.narkive.com/mn9ZpGu6/patch-2-3-marsboard-add-new-board > > and worked in the review feedback from back then. > > v1 -> v2: > - rebased on current upstream/next > - removed seperate defconfig and added board to imx_v7_defconfig (Lucas) > - added boot mode documentation > - removed redundant VPU/IPU AXI configurations from DCD-Table (Sascha) > - removed setting console in linux bootargs (Sascha) > - have board-specific environment use bbenv-y in Makefile (Sascha) > - added barebox device tree that includes kernel device tree > - used imx6_uart_setup_ll and imx_setup_pad for debug_ll UART > - used compressed DTB > - used imx6q_barebox_entry instead of hardcoding RAM size > > Ahmad Fatoum (2): > ARM: imx6: add Embest MarSBoard support > ARM: imx_v7_defconfig: enable Embdest MarS board > Applied, thanks Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
