Fix some typos that made it into the documentation. Tested-by: Stefan Lengfeld <contact@xxxxxxxxxxxxxxx> Can be added to the original commit's message as well. --- Documentation/boards/imx/embest-marsboard.rst | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/boards/imx/embest-marsboard.rst b/Documentation/boards/imx/embest-marsboard.rst index 1ee2a0b982e4..bdaa0880ae7a 100644 --- a/Documentation/boards/imx/embest-marsboard.rst +++ b/Documentation/boards/imx/embest-marsboard.rst @@ -28,7 +28,7 @@ Layout:: Boot Configuration ================== -DIP Switch S1 on the board can be used to set ``BOOT_MODE1`` and +DIP Switch ``SW1`` on the board can be used to set ``BOOT_MODE1`` and ``BOOT_MODE0`` going to the i.MX6: Set ``SW1 = 01`` for serial boot:: @@ -58,11 +58,11 @@ Set ``SW1 = 00`` for boot from eFuses:: Flashing barebox ---------------- - 1. Connect to the boards's Debug Mini-USB (115200 8N1) + 1. Connect to the board's Debug Mini-USB (115200 8N1) 2. Set ``SW1 = 01`` for serial boot mode (see above) - 3. Turn board's power on; + 3. Turn board's power on 4. Upload barebox image to the board via imx-usb-loader @@ -75,8 +75,8 @@ Flashing barebox .. code-block:: none - target$ fastboot flash bbu-spiflash images/barebox-embest-imx6q-marsboard.img + host$ fastboot flash bbu-spiflash images/barebox-embest-imx6q-marsboard.img .. - 5. Resore ``SW1 = 10`` for internal (SPI-NOR) boot (see above) + 5. Restore ``SW1 = 10`` for internal (SPI-NOR) boot (see above) -- 2.23.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
