Hello! How to run Barebox from ram now? I have a board with 64MiB ram and 16MiB flash, flash it to the first sector by original u-boot, maybe brick the board. Debrick is difficult due to limited tools. So, I want to run this in ram. And my u-boot *don't* have the "go" command. I have to use bootm command to run Barebox. - - - - - - mkimage -A mips -O linux -T kernel -C none -a 80060000 -e 80060000 -n 'barebox-tp-link' -d barebox.bin uImage tftpboot 0x81000000 uImage bootm 0x81000000 - - - - I have try these above, but no luck. Regards, duhuanpeng _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox