Hi, On 19.08.19 15:40, duhuanpeng wrote:
Hello! How to run Barebox from ram now? I have a board with 64MiB ram and 16MiB flash, flash it to the first sector by original u-boot, maybe brick the board. Debrick is difficult due to limited tools. So, I want to run this in ram. And my u-boot *don't* have the "go" command. I have to use bootm command to run Barebox. - - - - - - mkimage -A mips -O linux -T kernel -C none -a 80060000 -e 80060000 -n 'barebox-tp-link' -d barebox.bin uImage tftpboot 0x81000000 uImage bootm 0x81000000 - - - - I have try these above, but no luck.
Please, try 0xa1000000 instead of 0x81000000- -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
