Hello, (replying here because I don't have the original mail) On 8/29/19 3:03 PM, Oleksij Rempel wrote: > Hi, > > On 19.08.19 15:40, duhuanpeng wrote: >> Hello! How to run Barebox from ram now? >> >> I have a board with 64MiB ram and 16MiB flash, flash it to the first sector >> by >> original u-boot, maybe brick the board. Debrick is difficult due to limited >> tools. >> >> So, I want to run this in ram. And my u-boot *don't* have the "go" command. >> I have to use bootm command to run Barebox. Note you don't want to use the go command, because it doesn't properly shutdown U-Boot. This is problematic if your U-Boot configures memory caches or devices employing DMA. >> >> - - - - - - >> mkimage -A mips -O linux -T kernel -C none -a 80060000 -e 80060000 -n >> 'barebox-tp-link' -d barebox.bin uImage >> tftpboot 0x81000000 uImage >> bootm 0x81000000 >> - - - - >> I have try these above, but no luck. > > Please, try 0xa1000000 instead of 0x81000000- > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
