Hi Maik, On Thu, Jul 18, 2019 at 10:02:01AM +0200, Maik Otto wrote: > add in the images/Makefile.imx the support of building for signed, usb > signed and encrypted/signed images for NXP i.MX HABV4 > support for NXP i.mx6, i.mx7 and i.mx8 > > Signed-off-by: Maik Otto <m.otto@xxxxxxxxx> > --- > Changes in v3: > - nothing > Changes in v2: > - was Patch 2/4 in v1 > - no dynamic variable, parallel building of different image types now > --- > images/Makefile.imx | 322 +++++++++++++++++++++++++++++++++++++++++++++++++++- > 1 file changed, 321 insertions(+), 1 deletion(-) > > diff --git a/images/Makefile.imx b/images/Makefile.imx > index 9a7187a..9c70703 100644 > --- a/images/Makefile.imx > +++ b/images/Makefile.imx > @@ -147,216 +147,388 @@ pblb-$(CONFIG_MACH_REALQ7) += start_imx6_realq7 > CFG_start_imx6_realq7.pblb.imximg = $(board)/datamodul-edm-qmx6/flash-header.imxcfg > FILE_barebox-datamodul-edm-qmx6.img = start_imx6_realq7.pblb.imximg > image-$(CONFIG_MACH_REALQ7) += barebox-datamodul-edm-qmx6.img > +FILE_barebox-datamodul-edm-qmx6-s.img = start_imx6_realq7.pblb.simximg > +FILE_barebox-datamodul-edm-qmx6-us.img = start_imx6_realq7.pblb.usimximg > +FILE_barebox-datamodul-edm-qmx6-es.img = start_imx6_realq7.pblb.esimximg > +habv4image-$(CONFIG_MACH_REALQ7) += barebox-datamodul-edm-qmx6 This file contains way to much boilerplate already for my taste. Adding four more lines for every board is not something I like to do. Can we add even more magic to get rid of these additional lines? Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
