Since commit c7cc27d006cc (clk: mux: Support CLK_MUX_READ_ONLY flag) Barebox defines the CLK_MUX_READ_ONLY flag like Linux. The ZynqMP clock driver used the flag before, because this flag is used to convey this information from the PMU firmware to the Linux driver. However, the flags of the common clock framework and the flag of the protocol between PMU firmware and the ZynqMP clock driver should be handled separately. Therefore, add a driver specific prefix to the flag definition in the ZynqMP driver. Fixes the warning drivers/clk/zynqmp/clk-mux-zynqmp.c:18:0: warning: "CLK_MUX_READ_ONLY" redefined In file included from drivers/clk/zynqmp/clk-mux-zynqmp.c:13:0: include/linux/clk.h:350:0: note: this is the location of the previous definition Signed-off-by: Michael Tretter <m.tretter@xxxxxxxxxxxxxx> --- drivers/clk/zynqmp/clk-mux-zynqmp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/zynqmp/clk-mux-zynqmp.c b/drivers/clk/zynqmp/clk-mux-zynqmp.c index 4003267bd1..4c15223980 100644 --- a/drivers/clk/zynqmp/clk-mux-zynqmp.c +++ b/drivers/clk/zynqmp/clk-mux-zynqmp.c @@ -15,7 +15,7 @@ #include "clk-zynqmp.h" -#define CLK_MUX_READ_ONLY BIT(3) +#define ZYNQMP_CLK_MUX_READ_ONLY BIT(3) struct zynqmp_clk_mux { struct clk clk; @@ -83,7 +83,7 @@ struct clk *zynqmp_clk_register_mux(const char *name, mux->ops = zynqmp_pm_get_eemi_ops(); mux->clk.name = strdup(name); - if (nodes->type_flag & CLK_MUX_READ_ONLY) + if (nodes->type_flag & ZYNQMP_CLK_MUX_READ_ONLY) mux->clk.ops = &zynqmp_clk_mux_ro_ops; else mux->clk.ops = &zynqmp_clk_mux_ops; -- 2.20.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox