The blackfin architecture has been removed from barebox. Remove the
blackfin specifics in the USB drivers as well.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
drivers/usb/gadget/epautoconf.c | 19 ----
drivers/usb/musb/musb_core.c | 9 +-
drivers/usb/musb/musb_core.h | 32 +-----
drivers/usb/musb/musb_dma.h | 11 --
drivers/usb/musb/musb_io.h | 24 ----
drivers/usb/musb/musb_regs.h | 191 --------------------------------
include/usb/musb.h | 8 --
7 files changed, 2 insertions(+), 292 deletions(-)
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index f0f576d708..ced568921b 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -279,25 +279,6 @@ struct usb_ep *usb_ep_autoconfig_ss(
ep_comp))
goto found_ep;
}
-
-#ifdef CONFIG_BLACKFIN
- } else if (gadget_is_musbhdrc(gadget)) {
- if ((USB_ENDPOINT_XFER_BULK == type) ||
- (USB_ENDPOINT_XFER_ISOC == type)) {
- if (USB_DIR_IN & desc->bEndpointAddress)
- ep = find_ep (gadget, "ep5in");
- else
- ep = find_ep (gadget, "ep6out");
- } else if (USB_ENDPOINT_XFER_INT == type) {
- if (USB_DIR_IN & desc->bEndpointAddress)
- ep = find_ep(gadget, "ep1in");
- else
- ep = find_ep(gadget, "ep2out");
- } else
- ep = NULL;
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
- goto found_ep;
-#endif
}
/* Second, look at endpoints until an unclaimed one looks usable */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 84a05c4f96..4c11e6580c 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -121,7 +121,6 @@ MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
/*-------------------------------------------------------------------------*/
-#ifndef CONFIG_BLACKFIN
static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
{
void __iomem *addr = phy->io_priv;
@@ -195,10 +194,6 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
out:
return ret;
}
-#else
-#define musb_ulpi_read NULL
-#define musb_ulpi_write NULL
-#endif
struct usb_phy_io_ops musb_ulpi_access = {
.read = musb_ulpi_read,
@@ -207,7 +202,7 @@ struct usb_phy_io_ops musb_ulpi_access = {
/*-------------------------------------------------------------------------*/
-#if !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_BLACKFIN)
+#if !defined(CONFIG_USB_MUSB_TUSB6010)
/*
* Load an endpoint's FIFO
@@ -824,11 +819,9 @@ static int musb_core_init(u16 musb_type, struct musb *musb)
} else {
musb->is_multipoint = 0;
type = "";
-#ifndef CONFIG_USB_OTG_BLACKLIST_HUB
printk(KERN_ERR
"%s: kernel must blacklist external hubs\n",
musb_driver_name);
-#endif
}
/* log release info */
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index a21ddd5df2..d9402fcc4a 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -122,7 +122,7 @@ enum musb_g_ep0_state {
*/
#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_SOC_OMAP2430) \
- || defined(CONFIG_SOC_OMAP3430) || defined(CONFIG_BLACKFIN) \
+ || defined(CONFIG_SOC_OMAP3430) \
|| defined(CONFIG_ARCH_OMAP4)
/* REVISIT indexed access seemed to
* misbehave (on DaVinci) for at least peripheral IN ...
@@ -437,34 +437,6 @@ static inline struct musb *gadget_to_musb(struct usb_gadget *g)
return container_of(g, struct musb, g);
}
-#ifdef CONFIG_BLACKFIN
-static inline int musb_read_fifosize(struct musb *musb,
- struct musb_hw_ep *hw_ep, u8 epnum)
-{
- musb->nr_endpoints++;
- musb->epmask |= (1 << epnum);
-
- if (epnum < 5) {
- hw_ep->max_packet_sz_tx = 128;
- hw_ep->max_packet_sz_rx = 128;
- } else {
- hw_ep->max_packet_sz_tx = 1024;
- hw_ep->max_packet_sz_rx = 1024;
- }
- hw_ep->is_shared_fifo = false;
-
- return 0;
-}
-
-static inline void musb_configure_ep0(struct musb *musb)
-{
- musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
- musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
- musb->endpoints[0].is_shared_fifo = true;
-}
-
-#else
-
static inline int musb_read_fifosize(struct musb *musb,
struct musb_hw_ep *hw_ep, u8 epnum)
{
@@ -501,8 +473,6 @@ static inline void musb_configure_ep0(struct musb *musb)
musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
musb->endpoints[0].is_shared_fifo = true;
}
-#endif /* CONFIG_BLACKFIN */
-
/***************************** Glue it together *****************************/
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
index 1345a4ff04..97a03cbcf4 100644
--- a/drivers/usb/musb/musb_dma.h
+++ b/drivers/usb/musb/musb_dma.h
@@ -80,17 +80,6 @@ struct musb_hw_ep;
#define tusb_dma_omap() 0
#endif
-/* Anomaly 05000456 - USB Receive Interrupt Is Not Generated in DMA Mode 1
- * Only allow DMA mode 1 to be used when the USB will actually generate the
- * interrupts we expect.
- */
-#ifdef CONFIG_BLACKFIN
-# undef USE_MODE1
-# if !ANOMALY_05000456
-# define USE_MODE1
-# endif
-#endif
-
/*
* DMA channel status ... updated by the dma controller driver whenever that
* status changes, and protected by the overall controller spinlock.
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
index a4be339355..ec474477a1 100644
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -37,8 +37,6 @@
#include <io.h>
-#ifndef CONFIG_BLACKFIN
-
/* NOTE: these offsets are all in bytes */
static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
@@ -97,26 +95,4 @@ static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
#endif /* CONFIG_USB_MUSB_TUSB6010 */
-#else
-
-static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
- { return (u8) (bfin_read16(addr + offset)); }
-
-static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
- { return bfin_read16(addr + offset); }
-
-static inline u32 musb_readl(const void __iomem *addr, unsigned offset)
- { return (u32) (bfin_read16(addr + offset)); }
-
-static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
- { bfin_write16(addr + offset, (u16) data); }
-
-static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
- { bfin_write16(addr + offset, data); }
-
-static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
- { bfin_write16(addr + offset, (u16) data); }
-
-#endif /* CONFIG_BLACKFIN */
-
#endif
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index b9bcda5e39..2cb749140b 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -220,8 +220,6 @@
#define MUSB_HUBADDR_MULTI_TT 0x80
-#ifndef CONFIG_BLACKFIN
-
/*
* Common USB registers
*/
@@ -460,193 +458,4 @@ static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT));
}
-#else /* CONFIG_BLACKFIN */
-
-#define USB_BASE USB_FADDR
-#define USB_OFFSET(reg) (reg - USB_BASE)
-
-/*
- * Common USB registers
- */
-#define MUSB_FADDR USB_OFFSET(USB_FADDR) /* 8-bit */
-#define MUSB_POWER USB_OFFSET(USB_POWER) /* 8-bit */
-#define MUSB_INTRTX USB_OFFSET(USB_INTRTX) /* 16-bit */
-#define MUSB_INTRRX USB_OFFSET(USB_INTRRX)
-#define MUSB_INTRTXE USB_OFFSET(USB_INTRTXE)
-#define MUSB_INTRRXE USB_OFFSET(USB_INTRRXE)
-#define MUSB_INTRUSB USB_OFFSET(USB_INTRUSB) /* 8 bit */
-#define MUSB_INTRUSBE USB_OFFSET(USB_INTRUSBE)/* 8 bit */
-#define MUSB_FRAME USB_OFFSET(USB_FRAME)
-#define MUSB_INDEX USB_OFFSET(USB_INDEX) /* 8 bit */
-#define MUSB_TESTMODE USB_OFFSET(USB_TESTMODE)/* 8 bit */
-
-/* Get offset for a given FIFO from musb->mregs */
-#define MUSB_FIFO_OFFSET(epnum) \
- (USB_OFFSET(USB_EP0_FIFO) + ((epnum) * 8))
-
-/*
- * Additional Control Registers
- */
-
-#define MUSB_DEVCTL USB_OFFSET(USB_OTG_DEV_CTL) /* 8 bit */
-
-#define MUSB_LINKINFO USB_OFFSET(USB_LINKINFO)/* 8 bit */
-#define MUSB_VPLEN USB_OFFSET(USB_VPLEN) /* 8 bit */
-#define MUSB_HS_EOF1 USB_OFFSET(USB_HS_EOF1) /* 8 bit */
-#define MUSB_FS_EOF1 USB_OFFSET(USB_FS_EOF1) /* 8 bit */
-#define MUSB_LS_EOF1 USB_OFFSET(USB_LS_EOF1) /* 8 bit */
-
-/* Offsets to endpoint registers */
-#define MUSB_TXMAXP 0x00
-#define MUSB_TXCSR 0x04
-#define MUSB_CSR0 MUSB_TXCSR /* Re-used for EP0 */
-#define MUSB_RXMAXP 0x08
-#define MUSB_RXCSR 0x0C
-#define MUSB_RXCOUNT 0x10
-#define MUSB_COUNT0 MUSB_RXCOUNT /* Re-used for EP0 */
-#define MUSB_TXTYPE 0x14
-#define MUSB_TYPE0 MUSB_TXTYPE /* Re-used for EP0 */
-#define MUSB_TXINTERVAL 0x18
-#define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* Re-used for EP0 */
-#define MUSB_RXTYPE 0x1C
-#define MUSB_RXINTERVAL 0x20
-#define MUSB_TXCOUNT 0x28
-
-/* Offsets to endpoint registers in indexed model (using INDEX register) */
-#define MUSB_INDEXED_OFFSET(_epnum, _offset) \
- (0x40 + (_offset))
-
-/* Offsets to endpoint registers in flat models */
-#define MUSB_FLAT_OFFSET(_epnum, _offset) \
- (USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))
-
-/* Not implemented - HW has separate Tx/Rx FIFO */
-#define MUSB_TXCSR_MODE 0x0000
-
-static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
-{
-}
-
-static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
-{
-}
-
-static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
-{
-}
-
-static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
-{
-}
-
-static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
-{
-}
-
-static inline u8 musb_read_txfifosz(void __iomem *mbase)
-{
- return 0;
-}
-
-static inline u16 musb_read_txfifoadd(void __iomem *mbase)
-{
- return 0;
-}
-
-static inline u8 musb_read_rxfifosz(void __iomem *mbase)
-{
- return 0;
-}
-
-static inline u16 musb_read_rxfifoadd(void __iomem *mbase)
-{
- return 0;
-}
-
-static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
-{
- return 0;
-}
-
-static inline u8 musb_read_configdata(void __iomem *mbase)
-{
- return 0;
-}
-
-static inline u16 musb_read_hwvers(void __iomem *mbase)
-{
- /*
- * This register is invisible on Blackfin, actually the MUSB
- * RTL version of Blackfin is 1.9, so just harcode its value.
- */
- return MUSB_HWVERS_1900;
-}
-
-static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase)
-{
- return NULL;
-}
-
-static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs,
- u8 qh_addr_req)
-{
-}
-
-static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs,
- u8 qh_h_addr_reg)
-{
-}
-
-static inline void musb_write_rxhubport(void __iomem *ep_target_regs,
- u8 qh_h_port_reg)
-{
-}
-
-static inline void musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
- u8 qh_addr_reg)
-{
-}
-
-static inline void musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
- u8 qh_addr_reg)
-{
-}
-
-static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum,
- u8 qh_h_port_reg)
-{
-}
-
-static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
-{
- return 0;
-}
-
-static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
-{
- return 0;
-}
-
-static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
-{
- return 0;
-}
-
-static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
-{
- return 0;
-}
-
-static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
-{
- return 0;
-}
-
-static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
-{
- return 0;
-}
-
-#endif /* CONFIG_BLACKFIN */
-
#endif /* __MUSB_REGS_H__ */
diff --git a/include/usb/musb.h b/include/usb/musb.h
index 13eb9f8aac..fef7dc5f2c 100644
--- a/include/usb/musb.h
+++ b/include/usb/musb.h
@@ -85,14 +85,6 @@ struct musb_hdrc_config {
u8 ram_bits; /* ram address size */
struct musb_hdrc_eps_bits *eps_bits __deprecated;
-#ifdef CONFIG_BLACKFIN
- /* A GPIO controlling VRSEL in Blackfin */
- unsigned int gpio_vrsel;
- unsigned int gpio_vrsel_active;
- /* musb CLKIN in Blackfin in MHZ */
- unsigned char clkin;
-#endif
-
};
struct musb_hdrc_platform_data {
--
2.23.0
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
