Based on a unpublished patch from Andrew Lunn:
The the switch is hardware reset, it reads the contents of the
EEPROM. This can contain instructions for programming values into
registers and to perform waits between such programming. Reading
the EEPROM can take longer than the 100ms
mv88e6xxx_hardware_reset() waits after deasserting the reset
GPIO. So poll the EEPROM done bit to ensure it is complete.
Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
orignal patch augmented to have necessary Global 1 plubming, ported to
Barebox and slightly changed.
Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
Cc: Chris Healy <cphealy@xxxxxxxxx>
Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
---
drivers/net/phy/mv88e6xxx/Makefile | 1 +
drivers/net/phy/mv88e6xxx/chip.c | 34 ++++++++++++++++++++
drivers/net/phy/mv88e6xxx/chip.h | 1 +
drivers/net/phy/mv88e6xxx/global1.c | 49 +++++++++++++++++++++++++++++
drivers/net/phy/mv88e6xxx/global1.h | 37 ++++++++++++++++++++++
5 files changed, 122 insertions(+)
create mode 100644 drivers/net/phy/mv88e6xxx/global1.c
create mode 100644 drivers/net/phy/mv88e6xxx/global1.h
diff --git a/drivers/net/phy/mv88e6xxx/Makefile b/drivers/net/phy/mv88e6xxx/Makefile
index e09ea0aa47..e1d4b1b9d7 100644
--- a/drivers/net/phy/mv88e6xxx/Makefile
+++ b/drivers/net/phy/mv88e6xxx/Makefile
@@ -1,5 +1,6 @@
obj-y += mv88e6xxx.o
mv88e6xxx-objs := chip.o
+mv88e6xxx-objs += global1.o
mv88e6xxx-objs += global2.o
mv88e6xxx-objs += port.o
diff --git a/drivers/net/phy/mv88e6xxx/chip.c b/drivers/net/phy/mv88e6xxx/chip.c
index 9688dbd1be..0367f51515 100644
--- a/drivers/net/phy/mv88e6xxx/chip.c
+++ b/drivers/net/phy/mv88e6xxx/chip.c
@@ -11,6 +11,7 @@
#include <of_gpio.h>
#include "chip.h"
+#include "global1.h"
#include "global2.h"
#include "port.h"
@@ -342,6 +343,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6085",
.num_ports = 10,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6085_ops,
},
@@ -352,6 +354,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6095/88E6095F",
.num_ports = 11,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6095_ops,
},
@@ -362,6 +365,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6097/88E6097F",
.num_ports = 11,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6097_ops,
},
@@ -372,6 +376,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6123",
.num_ports = 3,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6123_ops,
},
@@ -382,6 +387,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6131",
.num_ports = 8,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6131_ops,
},
@@ -392,6 +398,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6341",
.num_ports = 6,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6141_ops,
},
@@ -402,6 +409,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6161",
.num_ports = 6,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6161_ops,
},
@@ -412,6 +420,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6165",
.num_ports = 6,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6165_ops,
},
@@ -422,6 +431,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6171",
.num_ports = 7,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6171_ops,
},
@@ -432,6 +442,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6172",
.num_ports = 7,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6172_ops,
},
@@ -442,6 +453,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6175",
.num_ports = 7,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6175_ops,
},
@@ -452,6 +464,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6176",
.num_ports = 7,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6176_ops,
},
@@ -462,6 +475,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6185",
.num_ports = 10,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6185_ops,
},
@@ -472,6 +486,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6190",
.num_ports = 11, /* 10 + Z80 */
.port_base_addr = 0x0,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6190_ops,
},
@@ -482,6 +497,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6190X",
.num_ports = 11, /* 10 + Z80 */
.port_base_addr = 0x0,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6190x_ops,
},
@@ -492,6 +508,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6191",
.num_ports = 11, /* 10 + Z80 */
.port_base_addr = 0x0,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6191_ops,
},
@@ -502,6 +519,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6240",
.num_ports = 7,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6240_ops,
},
@@ -512,6 +530,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6290",
.num_ports = 11, /* 10 + Z80 */
.port_base_addr = 0x0,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6290_ops,
},
@@ -522,6 +541,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6320",
.num_ports = 7,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6320_ops,
},
@@ -532,6 +552,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6321",
.num_ports = 7,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6321_ops,
},
@@ -542,6 +563,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6341",
.num_ports = 6,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6341_ops,
},
@@ -552,6 +574,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6350",
.num_ports = 7,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6350_ops,
},
@@ -562,6 +585,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6351",
.num_ports = 7,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6351_ops,
},
@@ -572,6 +596,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6352",
.num_ports = 7,
.port_base_addr = 0x10,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6352_ops,
},
@@ -582,6 +607,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6390",
.num_ports = 11, /* 10 + Z80 */
.port_base_addr = 0x0,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6390_ops,
},
@@ -592,6 +618,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6390X",
.num_ports = 11, /* 10 + Z80 */
.port_base_addr = 0x0,
+ .global1_addr = 0x1b,
.global2_addr = 0x1c,
.ops = &mv88e6390x_ops,
},
@@ -741,6 +768,8 @@ static void mv88e6xxx_hardware_reset(struct mv88e6xxx_chip *chip)
mv88e6xxx_hardware_reset_delay();
gpio_set_active(chip->reset, 0);
mv88e6xxx_hardware_reset_delay();
+
+ mv88e6xxx_g1_wait_eeprom_done(chip);
}
}
@@ -836,6 +865,11 @@ static int mv88e6xxx_probe(struct device_d *dev)
*/
mv88e6xxx_hardware_reset_delay();
}
+ /*
+ * Switch will not retrun valid data over MDIO until EEPROM is
+ * loaded
+ */
+ mv88e6xxx_g1_wait_eeprom_done(chip);
err = mv88e6xxx_detect(chip);
if (err)
diff --git a/drivers/net/phy/mv88e6xxx/chip.h b/drivers/net/phy/mv88e6xxx/chip.h
index 7548358de0..57f74a39a0 100644
--- a/drivers/net/phy/mv88e6xxx/chip.h
+++ b/drivers/net/phy/mv88e6xxx/chip.h
@@ -34,6 +34,7 @@ struct mv88e6xxx_info {
const char *name;
unsigned int num_ports;
unsigned int port_base_addr;
+ unsigned int global1_addr;
unsigned int global2_addr;
const struct mv88e6xxx_ops *ops;
diff --git a/drivers/net/phy/mv88e6xxx/global1.c b/drivers/net/phy/mv88e6xxx/global1.c
new file mode 100644
index 0000000000..2331195fb3
--- /dev/null
+++ b/drivers/net/phy/mv88e6xxx/global1.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Marvell 88E6xxx Switch Global (1) Registers support
+ *
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * Copyright (c) 2016-2017 Savoir-faire Linux Inc.
+ * Vivien Didelot <vivien.didelot@xxxxxxxxxxxxxxxxxxxx>
+ */
+
+#include <clock.h>
+#include <linux/bitfield.h>
+
+#include "chip.h"
+#include "global1.h"
+
+static int mv88e6xxx_g1_read(struct mv88e6xxx_chip *chip, int reg, u16 *val)
+{
+ int addr = chip->info->global1_addr;
+
+ return mv88e6xxx_read(chip, addr, reg, val);
+}
+
+void mv88e6xxx_g1_wait_eeprom_done(struct mv88e6xxx_chip *chip)
+{
+ const uint64_t start = get_time_ns();
+ const uint64_t timeout = 20 * SECOND;
+ u16 val;
+ int err;
+
+ /* Wait up to 1 second for the switch to finish reading the
+ * EEPROM.
+ */
+ while (!is_timeout(start, timeout)) {
+ err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_STS, &val);
+ if (err) {
+ dev_err(chip->dev, "Error reading status");
+ return;
+ }
+
+ if (val != 0xFFFF && /* switch will return 0xffff it it */
+ val & BIT(MV88E6XXX_G1_STS_IRQ_EEPROM_DONE))
+ return;
+
+ mdelay(2);
+ }
+
+ dev_err(chip->dev, "Timeout waiting for EEPROM done");
+}
diff --git a/drivers/net/phy/mv88e6xxx/global1.h b/drivers/net/phy/mv88e6xxx/global1.h
new file mode 100644
index 0000000000..a505bae2bf
--- /dev/null
+++ b/drivers/net/phy/mv88e6xxx/global1.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Marvell 88E6xxx Switch Global (1) Registers support
+ *
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * Copyright (c) 2016-2017 Savoir-faire Linux Inc.
+ * Vivien Didelot <vivien.didelot@xxxxxxxxxxxxxxxxxxxx>
+ */
+
+#ifndef _MV88E6XXX_GLOBAL1_H
+#define _MV88E6XXX_GLOBAL1_H
+
+#include "chip.h"
+
+/* Offset 0x00: Switch Global Status Register */
+#define MV88E6XXX_G1_STS 0x00
+#define MV88E6352_G1_STS_PPU_STATE 0x8000
+#define MV88E6185_G1_STS_PPU_STATE_MASK 0xc000
+#define MV88E6185_G1_STS_PPU_STATE_DISABLED_RST 0x0000
+#define MV88E6185_G1_STS_PPU_STATE_INITIALIZING 0x4000
+#define MV88E6185_G1_STS_PPU_STATE_DISABLED 0x8000
+#define MV88E6185_G1_STS_PPU_STATE_POLLING 0xc000
+#define MV88E6XXX_G1_STS_INIT_READY 0x0800
+#define MV88E6XXX_G1_STS_IRQ_AVB 8
+#define MV88E6XXX_G1_STS_IRQ_DEVICE 7
+#define MV88E6XXX_G1_STS_IRQ_STATS 6
+#define MV88E6XXX_G1_STS_IRQ_VTU_PROB 5
+#define MV88E6XXX_G1_STS_IRQ_VTU_DONE 4
+#define MV88E6XXX_G1_STS_IRQ_ATU_PROB 3
+#define MV88E6XXX_G1_STS_IRQ_ATU_DONE 2
+#define MV88E6XXX_G1_STS_IRQ_TCAM_DONE 1
+#define MV88E6XXX_G1_STS_IRQ_EEPROM_DONE 0
+
+void mv88e6xxx_g1_wait_eeprom_done(struct mv88e6xxx_chip *chip);
+
+#endif /* _MV88E6XXX_GLOBAL1_H */
--
2.21.0
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
