Re: MMC hardware partitioning

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/28/2019 12:45 PM, Sascha Hauer wrote:
Hi Gianluca,

On Tue, Aug 27, 2019 at 03:38:46PM +0200, gianluca wrote:
Hello everyone!
I am wondering if there is some way to enable the partition protection for
eMMC partition (usually to avoid data corruption due to a powerloss) in
Barebox, as seen is mmc command in the bootloader counterpart U-Boot (as
reference see u-boot/cmd/mmc.c ).

Have you found the barebox mmc_extcsd command? I don't know if that does
what you want, but it's worth a look.


Yes. I think it is. Right now I am thinking about using it from Linux with the mmc-utils, but if needed from bootloader I will give it a chance.

Thanks!

--
Eurek s.r.l.                          |
Electronic Engineering                | http://www.eurek.it
via Celletta 8/B, 40026 Imola, Italy  | Phone: +39-(0)542-609120
p.iva 00690621206 - c.f. 04020030377  | Fax:   +39-(0)542-609212

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux