U-Boot V2 Development (Barebox)

• Thread Index

• Re: [PATCH] console: fix out-of-bounds read in dputc(/dev/*, ...)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] console: fix out-of-bounds read in dputc(/dev/*, ...)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] console: don't count newlines twice in bytes written
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] ratp: return 0 bytes written from puts if busy
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] console: fix out-of-bounds read in dputc(/dev/*, ...)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] console: fix out-of-bounds read in dputc(/dev/*, ...)
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH] console: fix out-of-bounds read in dputc(/dev/*, ...)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] console: fix out-of-bounds read in dputc(/dev/*, ...)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] mtd: nand: mxs: add helper to calculate the page size
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 2/2] mtd: nand: mxs: sync page_size information
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: Holidays
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Holidays
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] nvmem: ocotp: set unique id as machine-id hashable
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] digest.h: needs errno definitions
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] clk: imx6: fix use of cpu_is_mx6* before they are initialized
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] mtd: nand: Add ecc parameters as device parameters
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: ubi: Max out default wear-leveling threshold
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• Re: [PATCH] mtd: ubi: Max out default wear-leveling threshold
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: ubi: Max out default wear-leveling threshold
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• Re: [PATCH v3 4/6] clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH v3 4/4] Makefile: add creation of signed/encrypted images for imx6, imx7, imx8
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v3 3/4] Kconfig: add selection for creation of signed/encrypted HABV4 images
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v3 2/4] imx6: added fit image signature to the devicetree for PHYTEC boards
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v3 1/4] i.mx6: signed boot: add habv4-imx6-gencsf.h to the flash header of the PHYTEC boards
  • From: Maik Otto <m.otto@xxxxxxxxx>
• Re: [PATCH] UBI: silence erroneous GCC warning about uninitialized read
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] clk: imx6: fix use of cpu_is_mx6* before they are initialized
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 3/6] clk: imx6: remove quirky clk_set_parent(LDB_diN_sel, pll5_video_div)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 6/6] clk: imx6: define an enum for ldb mux inputs
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 4/6] clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 2/6] clk: imx6: Mask mmdc_ch1 handshake for periph2_sel and mmdc_ch1_axi_podf
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 0/6] clk: imx6: work around LDB hang caused by ERR009219
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 5/6] clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 1/6] clk: imx6: fix use of cpu_is_mx6* before they are initialized
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] imx6: added fit image signature to the devicetree for PHYTEC boards
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] Makefile: add creation of signed/encrypted images for imx6, imx7, imx8
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v2 3/4] Kconfig: add selection for creation of signed/encrypted HABV4 images
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v2 2/4] imx6: added fit image signature to the devicetree for PHYTEC boards
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v2 1/4] i.mx6: signed boot: add habv4-imx6-gencsf.h to the flash header of the PHYTEC boards
  • From: Maik Otto <m.otto@xxxxxxxxx>
• Re: [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] nvmem: ocotp: set unique id as machine-id hashable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] OF: gpio: Add special quirk to parse regulator flags
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: Fix global_variable_offset() for aarch64
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: Fix global_variable_offset() for aarch64
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/5] ARM: Fix global_variable_offset() for aarch64
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/5] ARM: zii-imx8mq-dev: Do setup_c() before accessing global variables
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/5] ARM: phyCORE-i.MX8M SOM: Do setup_c() before accessing global variables
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/5] ARM: nxp-imx8mq-evk: Do setup_c() before accessing global variables
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/5] ARM: access __boot_cpu_mode with a function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] nvmem: ocotp: set unique id as machine-id hashable
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH 2/3] common: machine_id: introduce machine id generation and pass id on
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH 1/3] digest.h: needs errno definitions
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] arm: port imx28-evk to devicetree
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] OF: gpio: Add special quirk to parse regulator flags
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] net: fec_imx: add regulator support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] Documentation: boards: add initial STM32MP documentation
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH] ubiformat: improve generation of UBI image sequence
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] ubiformat: Fix wrong error tests
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] UBI: silence erroneous GCC warning about uninitialized read
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] mtd: peb: Do not mark as bad in mtd_peb_torture()
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/3] ubiformat: handle write errors correctly
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] mtd: peb: Do not mark as bad in mtd_peb_torture()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] mtd: ubi: mark PEBs as bad on erase failure
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ubiformat: improve generation of UBI image sequence
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] dts/imx25: drop sram node
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: stm32mp: fix some misnomers/typos
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/7] gpio: allow for arch-specific ARCH_NR_GPIOS > 256
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] dts/imx25: drop sram node
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] fixup! Documentation: boards: add initial STM32MP documentation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/5] images: add support for generating STM32MP images
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/5] Documentation: boards: add initial STM32MP documentation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/5] filetype: add STM32 image type
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/5] ARM: stm32mp: fix some misnomers/typos
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/5] ARM: stm32mp: generate STM32 images
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: MII command to read and write specific registers
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: MII command to read and write specific registers
  • From: Benjamin Beckmeyer <beb@xxxxxxxxxxxx>
• Re: [PATCH v2 1/8] ARM: phytec-som-imx6: Add low cost variant for imx6dl phycore
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: eMMC probe in imx8mm
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] i2c: add stm32f7 I2C adapter driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: MII command to read and write specific registers
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• MII command to read and write specific registers
  • From: Benjamin Beckmeyer <beb@xxxxxxxxxxxx>
• Re: eMMC probe in imx8mm
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: ubi: Max out default wear-leveling threshold
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• Re: [PATCH v2 1/8] ARM: phytec-som-imx6: Add low cost variant for imx6dl phycore
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• v2019.07.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: ubi: Max out default wear-leveling threshold
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-phytec-state: Add backend-storage-type
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: stm32_iwdg: remove left-over comment
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/8] ARM: phytec-som-imx6: Add low cost variant for imx6dl phycore
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] usb: imx-usb-phy: select syscon driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] fixup! reset: add reset controller driver for STM32 RCC
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/7] i2c: add stm32f7 I2C adapter driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 7/7] watchdog: add support for STPMIC1 integrated watchdog
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/7] reset: add reset controller driver for STM32 RCC
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 6/7] mfd: add support for STPMIC1
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/7] ARM: dts: stm32mp157c: correct gpioz id
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/7] gpio: allow for arch-specific ARCH_NR_GPIOS > 256
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/7] ARM: stm32mp: set CONFIG_ARCH_NR_GPIO = (26 * 16)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] watchdog: stm32_iwdg: remove left-over comment
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] mtd: ubi: Max out default wear-leveling threshold
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH] ARM: dts: am335x-phytec-state: Add backend-storage-type
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 8/8] ARM: dts: imx6ul: phycore: Add phyCORE-i.MX 6ULL with eMMC
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 7/8] ARM: dts: imx6ul: phycore: Add support for eMMC
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 3/8] ARM: dts: imx6ul: phycore: Add eeprom label
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 5/8] ARM: imx6ul: phycore: Prepare for eMMC module
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 4/8] ARM: dts: imx6ul: phycore: Add state framework
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 2/8] ARM: dts: imx6qdl: phycore: Add state framework
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 6/8] ARM: phytec-som-imx: imx6ul: Add eMMC support
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH v2 1/8] ARM: phytec-som-imx6: Add low cost variant for imx6dl phycore
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• Re: Oselas 2018.12.0 toolchain seems to break barebox for AM335x
  • From: Andreas Geisenhainer <Andreas.Geisenhainer@xxxxxxxxxxxx>
• Re: Oselas 2018.12.0 toolchain seems to break barebox for AM335x
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] net: cpsw: adopt to upstream device tree changes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] pinctrl: stm32: add debug output in set_state callback
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] arm: port imx28-evk to devicetree
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] net: fec_imx: add regulator support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: eMMC probe in imx8mm
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] lib: Add missing arguments to memcpy_parse_options()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: dts: imx6qdl: phycore: Add state framework
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• [PATCH 1/2] pstore: Only capture log messages
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] pstore: remove unused code
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/8] ARM: dts: imx6ul: phycore: Add state framework
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: dts: imx6qdl: phycore: Add state framework
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: dts: imx6qdl: phycore: Add state framework
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH] lib: Add missing arguments to memcpy_parse_options()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: memcmp command is broken
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Oselas 2018.12.0 toolchain seems to break barebox for AM335x
  • From: Andreas Geisenhainer <Andreas.Geisenhainer@xxxxxxxxxxxx>
• [PATCH 1/2] pinctrl: stm32: add debug output in set_state callback
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] pinctrl: stm32: fix error path when gpio chip is not found
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] arm: port imx28-evk to devicetree
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH 2/2] net: fec_imx: add regulator support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: mach-imx: imx6: Read and print the UID of i.MX6 SOCs
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts: add mips-relocs to .gitignore
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] scripts: add mips-relocs to .gitignore
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• eMMC probe in imx8mm
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• memcmp command is broken
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH v2] ARM: mach-imx: imx6: Read and print the UID of i.MX6 SOCs
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• v2019.06.1
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 00/12] ARM: stm32mp: add drivers for GPIO, pinctrl
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] clk: divider: export clk_div_mask() helper
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts: socfgpa_import_preloader: simplify procedure
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: imx6qdl: phycore: Set phy-reset-duration for fec
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] sandbox fixes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] blspec: invalidate only necessary bootm variables
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: mach-imx: imx6: Read and print the UID of i.MX6 SOCs
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/4] startup: Factor out the autoboot counter to separate function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/4] startup: Create global.linux.bootargs.dyn.* variables where they are needed
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/4] startup: Create boot related variables where they are used
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/4] startup: remove unused editcmd variable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 00/12] ARM: stm32mp: add drivers for GPIO, pinctrl
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v1 00/12] ARM: stm32mp: add drivers for GPIO, pinctrl
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] clk: divider: export clk_div_mask() helper
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH] scripts: socfgpa_import_preloader: simplify procedure
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: imx6qdl: phycore: Set phy-reset-duration for fec
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 2/2] ARM: dts: imx6ul: phycore: Reduce eth drive strength
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 8/8] ARM: dts: imx6ul: phycore: Add phyCORE-i.MX 6ULL with eMMC
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 6/8] ARM: phytec-som-imx: imx6ul: Add eMMC support
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 7/8] ARM: dts: imx6ul: phycore: Add support for eMMC
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 5/8] ARM: imx6ul: phycore: Prepare for eMMC module
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 4/8] ARM: dts: imx6ul: phycore: Add state framework
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 3/8] ARM: dts: imx6ul: phycore: Add eeprom label
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 2/8] ARM: dts: imx6qdl: phycore: Add state framework
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 1/8] ARM: phytec-som-imx6: Add low cost variant for imx6dl phycore
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• [PATCH 3/3] sandbox: drop blank lines at EOF
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 2/3] sandbox: eliminale no previous prototype for ‘sandbox_add_device’ warning
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 0/3] sandbox fixes
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 1/3] sandbox: prevent segfault in tap_alloc()
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 2/2] f_fastboot: remove only image from bootm variables
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 1/2] blspec: invalidate only necessary bootm variables
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH] ARM: mach-imx: imx6: Read and print the UID of i.MX6 SOCs
  • From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
• Re: [PATCH] mips: reloc: remove outdated comment
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: socfpga: terasic-de0-nano-soc: update handoff files to 18.1
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] serial: ns16550: support reg-offset device-tree property
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mfd: syscon: add syscon_regmap_lookup_by_phandle()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] clk: divider: Remove unused variable in clk_divider_recalc_rate
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 07/13] scripts: imx: support signing for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH v2] treewide: remove CONFIG_DEBUG_INFO from defconfigs
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH] mips: reloc: remove outdated comment
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: reloc: make flush_cache_all() usable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 10/13] arm: uncompress: verify sha256 if enabled
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 10/13] arm: uncompress: verify sha256 if enabled
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: socfpga: terasic-de0-nano-soc: add missing SECT() macro for iocsr_scan_chain3_table
  • From: Gwenhael Goavec-Merou <gwenj@xxxxxxxxxxxxxx>
• [PATCH 1/3] ARM: socfpga: terasic-de0-nano-soc: update handoff files to 18.1
  • From: Gwenhael Goavec-Merou <gwenj@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: socfpga: terasic-de0-nano-soc: statify sys_mgr_init_table
  • From: Gwenhael Goavec-Merou <gwenj@xxxxxxxxxxxxxx>
• [PATCH] serial: ns16550: support reg-offset device-tree property
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH] mfd: syscon: add syscon_regmap_lookup_by_phandle()
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH 1/3] clk: divider: Remove unused variable in clk_divider_recalc_rate
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH 3/3] clk: divider: Make generic for usage elsewhere
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH 2/3] clk: divider: Fix best div calculation for power-of-two and table dividers
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [RFC] sandbox: prevent segfault in tap_alloc()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: reloc: make flush_cache_all() usable
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [RFC] sandbox: prevent segfault in tap_alloc()
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: bugfix: _barebox_image_size wrong if enable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: rpi: use sdhost for eMMC access on CM3.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v4 0/2] add JTAG debugging support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: AW: load BL31 on imx8mm and imx8mq
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• Re: [PATCH 01/13] hab: implement interface for i.MX8MQ
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: AW: load BL31 on imx8mm and imx8mq
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• AW: load BL31 on imx8mm and imx8mq
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• Re: bugfix: _barebox_image_size wrong if enable
  • From: 张忠山 <zzs213@xxxxxxx>
• Re: load BL31 on imx8mm and imx8mq
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH] ARM: rpi: use sdhost for eMMC access on CM3.
  • From: Tomaz Solc <tomaz.solc@xxxxxxxxxx>
• load BL31 on imx8mm and imx8mq
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• Re: [PATCH 10/13] arm: uncompress: verify sha256 if enabled
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 07/13] scripts: imx: support signing for i.MX8MQ
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 01/13] hab: implement interface for i.MX8MQ
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: bugfix: _barebox_image_size wrong if enable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC] sandbox: prevent segfault in tap_alloc()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i.MX: HABv4: use min_t instead of min
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] images: update gitignore for imx signed images
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 01/10] ARM: i.MX: zii-vf610-dev-rev-b: Use SPDX tag in DTS
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] MIPS: misc patches
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: reloc: make flush_cache_all() usable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: gpio: fix sda/scl-gpios property support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 13/13] boards: nxp-mx8-evk: rework to different boot flow
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 11/13] mach-imx: add gencsf header for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 08/13] images: always build sha256sum into pbl
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 12/13] mach-imx: hab: select piggy verification for i.MX8
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 09/13] pbl: add sha256 and piggy verification to PBL
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 06/13] sections: fix macro for barebox_pbl_size
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 10/13] arm: uncompress: verify sha256 if enabled
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 07/13] scripts: imx: support signing for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 04/13] esdhc-pbl: extract header parsing from image start
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 05/13] esdhc-pbl: add piggy load function
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 02/13] mach-imx: enable HAB on i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 03/13] arm: lib: add CSF section between PBL and piggy
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 00/13] HAB for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 01/13] hab: implement interface for i.MX8MQ
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: Bringup Barebox on imx8mm
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• [PATCH 2/2] i.MX: HABv4: Reset index variable after error type
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 1/2] i.MX: HABv4: use min_t instead of min
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH] images: ignore i.MX signed (USB) images and outputs of imx-csf tool
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH] images: ignore i.MX signed (USB) images and outputs of imx-csf tool
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH] images: ignore i.MX signed (USB) images and outputs of imx-csf tool
  • From: Denis OSTERLAND <denis.osterland@xxxxxxxxx>
• [PATCH] images: ignore i.MX signed (USB) images and outputs of imx-csf tool
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH v4 2/2] add gdb helper scripts to load barebox symbols
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 0/2] add JTAG debugging support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 1/2] add CONFIG_PBL_BREAK option
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: bugfix: _barebox_image_size wrong if enable
  • From: 张忠山 <zzs213@xxxxxxx>
• [PATCH] images: update gitignore for imx signed images
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 10/10] ARM: zii-imx7d-dev: Add support for RMU2 board
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 09/10] ARM: imx7d-zii-rpu2: Switch to using kernel DTS
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 08/10] ARM: Rename zii-imx7d-rpu2 to zii-imx7d-dev
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 06/10] Documentation: zii-vf610-dev: Reconcile DDR setup with DCD
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 07/10] Documentation: zii: Fix buggy check_bits_set_32
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 05/10] Documentation: zii-vf610-dev: Add necessary post reset delay
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 04/10] ARM: i.MX: zii-vf610-dev-rev-c: Fix DTS warning
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 03/10] ARM: i.MX: zii-vf610-dev-rev-b: Fix DTS warning
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 02/10] ARM: i.MX: zii-vf610-dev-rev-c: Use SPDX tag in DTS
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 01/10] ARM: i.MX: zii-vf610-dev-rev-b: Use SPDX tag in DTS
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 4/4] MIPS: dts: tplink-mr3020: add missing stdout-path property
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH 4/4] MIPS: dts: tplink-mr3020: add missing stdout-path property
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH 4/4] MIPS: dts: tplink-mr3020: add missing stdout-path property
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 3/4] serial: ar933x: set linux_console_name
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 1/4] MIPS: Kconfig: move ARCH_TEXT_BASE to top mips Kconfig file
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 2/4] Documentation: user manual: update MIPS-specific targets
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 0/4] MIPS: misc patches
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] MIPS: reloc: make flush_cache_all() usable
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2] treewide: remove CONFIG_DEBUG_INFO from defconfigs
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH v2] treewide: remove CONFIG_DEBUG_INFO from defconfigs
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [RFC 0/2] MIPS: fix code relocation routine
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 00/12] ARM: stm32mp: add drivers for GPIO, pinctrl
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] treewide: remove CONFIG_DEBUG_INFO from defconfigs
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] treewide: remove CONFIG_DEBUG_INFO from defconfigs
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v2] treewide: remove CONFIG_DEBUG_INFO from defconfigs
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] treewide: remove CONFIG_DEBUG_INFO from defconfigs
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC] sandbox: prevent segfault in tap_alloc()
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v3 0/4] ARM: stm32mp: implement watchdog/reset handling
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] i2c: gpio: fix sda/scl-gpios property support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] kconfig: update to Linux 5.2-rc4
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] i2c: gpio: add sda/scl-gpios property support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] i2c: gpio: add sda/scl-gpios property support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: Raspberry CM3 eMMC Boot
  • From: Tomaž Šolc <tomaz.solc@xxxxxxxxxx>
• Re: [RFC 2/2] MIPS: relocate_code: fix barebox image memcpy() size
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] i2c: gpio: add sda/scl-gpios property support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: bugfix: _barebox_image_size wrong if enable
  • From: 张忠山 <zzs213@xxxxxxx>
• [RFC 1/2] MIPS: lib/Makefile: fix whitespaces
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 0/2] MIPS: fix code relocation routine
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 2/2] MIPS: relocate_code: fix barebox image memcpy() size
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: Raspberry CM3 eMMC Boot
  • From: Rico Pahlisch <rico.pahlisch@xxxxxxxxxxxx>
• Re: [PATCH 0/4] Overall small fixes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: user: suggest U-Boot's bootm, not go
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Raspberry CM3 eMMC Boot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: bugfix: _barebox_image_size wrong if enable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] kconfig: update to Linux 5.2-rc4
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH] kconfig: update to Linux 5.2-rc4
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 08/12] ARM: stm32mp157c-dk2: add board-specific sysconf fixups
  • From: Rouven Czerwinski <rcz@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] common: boot: Instantiate storage for global.boot.machine_id
  • From: Cory Tusar <Cory.Tusar@xxxxxxxx>
• Re: [PATCH v2 3/6] watchdog: add stm32 watchdog and reset driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v1 08/12] ARM: stm32mp157c-dk2: add board-specific sysconf fixups
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] ARM: stm32mp1: rerun savedefconfig on stm32mp_defconfig
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 05/12] pinctrl: add driver for STM32 GPIO and pin multiplexer
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 11/12] ARM: stm32mp: implement PSCI support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 02/12] ARM: dts: stm32mp: factor out common DK nodes into dtsi
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 12/12] ARM: stm32mp157c-dk2: boot kernel in nonsecure mode
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 10/12] ARM: sm: move get_gicd_base_address to header for reuse
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 06/12] ARM: dts: stm32mp157a-dk1: enable heartbeat and error LEDs
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 08/12] ARM: stm32mp157c-dk2: add board-specific sysconf fixups
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 00/12] ARM: stm32mp: add drivers for GPIO, pinctrl
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 09/12] ARM: psci: fix erroneous call of ->system_reset on system_off
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 04/12] driver: add stubs for hardware spinlocks
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 07/12] ARM: stm32mp: turn on GPIO related options
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 01/12] ARM: dts: stm32mp157a-dk1.dts: include upstream dts before barebox'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 03/12] gpiolib: add gpio_get_chip helper
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 3/4] watchdog: add stm32 watchdog and reset driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 4/4] ARM: stm32mp: enable watchdog in defconfig
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 2/4] Documentation: reset-reason: document new BROWNOUT reason
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 0/4] ARM: stm32mp: implement watchdog/reset handling
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 1/4] ARM: stm32mp1: rerun savedefconfig on stm32mp_defconfig
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] Documentation: user: suggest U-Boot's bootm, not go
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• bugfix: _barebox_image_size wrong if enable
  • From: 张忠山 <zzs213@xxxxxxx>
• Raspberry CM3 eMMC Boot
  • From: Rico Pahlisch <rico.pahlisch@xxxxxxxxxxxx>
• Re: [PATCH] usb: usb251xb: fix optional reset gpio request
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: zii-vf610-dev: Trivial spelling fix
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] pcf857x: fix CONFIG_OF to OFDEVICE
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] common: boot: Instantiate storage for global.boot.machine_id
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: spi-nor: Add support for ISSI flashes from Linux
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC] request_sdram_region: print error message
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/4] ARM: phytec-som-imx6: update automount net entries
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 3/4] commands: mmc_extcsd: fix extcsd value meanings
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 4/4] i2c: gpio: add sda/scl-gpios property support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 0/4] Overall small fixes
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 2/4] defaultenv-2: net: fix comment
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] usb: usb251xb: fix optional reset gpio request
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: Bringup Barebox on imx8mm
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• Re: [PATCH] kconfig: update to Linux 5.2-rc4
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH] MIPS: fix 'assignment makes integer from pointer without a cast' warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] kconfig: update to Linux 5.2-rc4
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: zii-vf610-dev: Trivial spelling fix
  • From: Cory Tusar <Cory.Tusar@xxxxxxxx>
• [PATCH] pcf857x: fix CONFIG_OF to OFDEVICE
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 1/2] common: boot: Instantiate storage for global.boot.machine_id
  • From: Cory Tusar <Cory.Tusar@xxxxxxxx>
• [PATCH 2/2] common: blspec: Both environment and config file machine-id must match
  • From: Cory Tusar <Cory.Tusar@xxxxxxxx>
• [PATCH 0/2] Fix machine-id operation
  • From: Cory Tusar <Cory.Tusar@xxxxxxxx>
• [PATCH] mtd: spi-nor: Add support for ISSI flashes from Linux
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Bringup Barebox on imx8mm
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Bringup Barebox on imx8mm
  • From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
• [RFC] request_sdram_region: print error message
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] MIPS: fix 'assignment makes integer from pointer without a cast' warning
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: Strange behaviour of 'exit' command
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] pbl: report decompression failure
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] kbuild: do not drop -I without parameter
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] watchdog: add stm32 watchdog and reset driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] treewide: remove stale mentions of CONFIG_OF in comments
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] commands: don't use stale errno when calling fb_open
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] plathome-openblocks-a6: use image format 0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] startup: execute /env/bin/init as part of the initial shell
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Strange behaviour of 'exit' command
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Re: [PATCH] startup: Do not overwrite global.linux.bootargs.console
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH] startup: execute /env/bin/init as part of the initial shell
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• [PATCH] startup: Do not overwrite global.linux.bootargs.console
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Environment variables set by /env/bin/init disappear when script exits
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: zii-rdu2: disable eth0 and eth1
  • From: Vivien Didelot <vivien.didelot@xxxxxxxxx>
• Re: [PATCH] ARM: zii-rdu2: disable eth0 and eth1
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: Environment variables set by /env/bin/init disappear when script exits
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Environment variables set by /env/bin/init disappear when script exits
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Re: [PATCH] ARM: zii-rdu2: disable eth0 and eth1
  • From: Vivien Didelot <vivien.didelot@xxxxxxxxx>
• Re: [PATCH v2 3/6] watchdog: add stm32 watchdog and reset driver
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] watchdog: add stm32 watchdog and reset driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] watchdog: add stm32 watchdog and reset driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] watchdog: add stm32 watchdog and reset driver
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: zii-rdu2: disable eth0 and eth1
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] kconfig: update to Linux 5.2-rc4
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH] pbl: report decompression failure
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH] kbuild: do not drop -I without parameter
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH v2 3/6] watchdog: add stm32 watchdog and reset driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 6/6] ARM: stm32mp: add entry point, not point.pblb to pblb-y
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 4/6] ARM: stm32mp: enable watchdog in oftree and defconfig
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 0/6] ARM: stm32mp: implement watchdog/reset handling
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 5/6] ARM: stm32mp: stm32mp157c-dk2: compress the DTB
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 2/6] reset_source: add new Brownout reset (BOR) source
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 1/6] ARM: stm32mp1: rename to stm32mp
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• v2019.06.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] treewide: remove stale mentions of CONFIG_OF in comments
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] plathome-openblocks-a6: use image format 0
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2] commands: don't use stale errno when calling fb_open
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] kconfig: update to Linux 5.2-rc4
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/4] images/mvebu: Convert Armada machines to mvebuimg
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/4] mvebuimg: new tool to create kwb version1 boot images
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 4/4] images/mvebu: use space before = instead of tab
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/4] plathome-openblocks-a6: use image format 0
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx6sx-sdb: remove PHY reset GPIO from DT
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] nvmem: ocotp: Elongate OCOTP_CTRL_ADDR field
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] add CONFIG_PBL_BREAK option
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] add CONFIG_PBL_BREAK option
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] nvmem: ocotp: Change TIMING calculation algorithm
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 2/3] nvmem: ocotp: Ensure WAIT bits are preserved
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 1/3] nvmem: ocotp: Elongate OCOTP_CTRL_ADDR field
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: zii-rdu2: disable eth0 and eth1
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] ARM: zii-rdu2: disable eth0 and eth1
  • From: Vivien Didelot <vivien.didelot@xxxxxxxxx>
• [PATCH] kconfig: update to Linux 5.2-rc4
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] add CONFIG_PBL_BREAK option
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: imx6sx-sdb: remove PHY reset GPIO from DT
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] port reduced version of remoteproc framework from linux
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/4] add syscon_regmap_lookup_by_phandle() support
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 3/4] of: base: don't try to read cells_name property if no cells_name set
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 2/4] elf: add missing elf32_shdr
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] remove CONFIG_DEBUG_INFO
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 4/4] port reduced version of remoteproc framework from linux
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [RFC 3/4] WIP: make it work on litex
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v3 3/3] add gdb helper scripts to load barebox symbols
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 2/3] add CONFIG_PBL_BREAK option
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 1/3] remove CONFIG_DEBUG_INFO
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/7] U-Boot environment data as a filesystem
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: udoo-neo: add ocotp and environment nodes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mvebu: make the compiler inline mvebu_remap_registers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] images: ignore *.csfbin files
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts: imx-usb-loader: add i.MX8MQ PID and VID
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 4/4] port reduced version of remoteproc framework from linux
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! ARM: Initial OP-TEE support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] filetype: fix typo
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] scripts: imx-image: document -d, -e, -s, -u
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] add gdb helper scripts to load barebox symbols
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] add CONFIG_PBL_BREAK option
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] remove CONFIG_DEBUG_INFO
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] add CONFIG_PBL_BREAK option
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: use anonymous labels in ENTRY_FUNCTION_END and STOP_WITH_DEBUG_EVENT macros
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: use anonymous labels in ENTRY_FUNCTION_END and STOP_WITH_DEBUG_EVENT macros
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH 3/3] add gdb helper scripts to load barebox symbols
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH 2/2] firmware: add gitignore file for *.bin
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 1/2] images: ignore *.csfbin files
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: use anonymous labels in ENTRY_FUNCTION_END and STOP_WITH_DEBUG_EVENT macros
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: use anonymous labels in ENTRY_FUNCTION_END and STOP_WITH_DEBUG_EVENT macros
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH] scripts: imx-usb-loader: add i.MX8MQ PID and VID
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v1 1/4] add syscon_regmap_lookup_by_phandle() support
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] doc: boards: imx: add HAB section
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• [PATCH] ARM: udoo-neo: add ocotp and environment nodes
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH] mvebu: make the compiler inline mvebu_remap_registers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v1 4/4] port reduced version of remoteproc framework from linux
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH] fixup! ARM: Initial OP-TEE support
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH] net: limit NET_FSL_FMAN to Layerscape
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v1 3/4] of: base: don't try to read cells_name property if no cells_name set
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 2/4] elf: add missing elf32_shdr
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH] filetype: fix typo
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: Raspberry Pi Barebox State Integration - SD card
  • From: Moritz Augsburger <ml+barebox@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: use anonymous labels in ENTRY_FUNCTION_END and STOP_WITH_DEBUG_EVENT macros
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: Raspberry Pi Barebox State Integration - SD card
  • From: Valentina Rusu <skorpyon1992@xxxxxxxxx>
• Re: [PATCH 3/7] watchdog: add stm32 watchdog and reset driver
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH 3/3] doc: boards: imx: add HAB section
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH 2/3] doc: boards: imx: document image creation
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH 1/3] scripts: imx-image: document -d, -e, -s, -u
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: use anonymous labels in ENTRY_FUNCTION_END and STOP_WITH_DEBUG_EVENT macros
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH 3/4] i.mx6: signed boot: add habv4-imx6-gencsf.h to the flash header of the PHYTEC boards
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH 3/3] add gdb helper scripts to load barebox symbols
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 2/3] add CONFIG_PBL_BREAK option
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 1/3] remove CONFIG_DEBUG_INFO
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: use anonymous labels in ENTRY_FUNCTION_END and STOP_WITH_DEBUG_EVENT macros
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 3/7] watchdog: add stm32 watchdog and reset driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] MIPS: use anonymous labels in ENTRY_FUNCTION_END and STOP_WITH_DEBUG_EVENT macros
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: simplefb question
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Raspberry Pi Barebox State Integration - SD card
  • From: Moritz Augsburger <ml+barebox@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/7] watchdog: add stm32 watchdog and reset driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/7] reset_source: add new Brownout reset (BOR) source
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: rdu2: Initialize DEBUG_LL in entry function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] serial_ns16550: readd support for mvebu armada 38x
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 3/7] watchdog: add stm32 watchdog and reset driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/7] reset_source: add new Brownout reset (BOR) source
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] commands: don't use stale errno when calling fb_open
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] plathome-openblocks-a6: provide a kwbimage.cfg file
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: imx: rdu1: disable FEC node
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: rdu2: extend environment for netboot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: zii-imx8mq-dev: add barebox and environment partition
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Raspberry Pi Barebox State Integration - SD card
  • From: Tomaž Šolc <tomaz.solc@xxxxxxxxxx>
• Re: [PATCH] Documentation: add riscv mention
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] riscv: dts: erizo-generic: fix memory node name
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: zii-common: add missing stddef.h include
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH RFC] ARM: imx8: fix discrepancy between comment and code
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: macb: dma_sync_* receive buffers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v4] gpio: add driver for PCF857x, PCA{85, 96}7x, and MAX732[89] I2C GPIO expanders
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Raspberry Pi Barebox State Integration - SD card
  • From: Valentina Rusu <skorpyon1992@xxxxxxxxx>
• Re: [PATCH] ARM: panic with a message when relocation type is unknown
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 5/7] fs: Add a driver to access U-Boot environment variables
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 4/7] misc: Add a driver to expose U-Boot environment variable data
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 7/7] ARM: rdu1: Add U-Boot environment partition
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 6/7] ARM: rdu2: Add U-Boot environment partitions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 3/7] drivers: Introduce late_platform_driver()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 2/7] filetype: Allow specifying cdev's filetype explicitly
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 0/7] U-Boot environment data as a filesystem
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 1/7] filetype: Add "U-Boot environmemnt variable data" filetype
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] serial_ns16550: readd support for mvebu armada 38x
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 4/7] ARM: stm32mp1: enable watchdog in oftree and defconfig
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/7] ARM: stm32mp1: enable watchdog in oftree and defconfig
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH] ARM: rdu2: Initialize DEBUG_LL in entry function
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] commands: don't use stale errno when calling fb_open
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 3/7] watchdog: add stm32 watchdog and reset driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 7/7] ARM: stm32mp: add entry point, not point.pblb to pblb-y
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/7] ARM: stm32mp1: enable watchdog in oftree and defconfig
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/7] ARM: stm32mp1: rename to stm32mp
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 6/7] ARM: stm32mp: stm32mp157c-dk2: compress the DTB
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/7] ARM: stm32mp: stm32mp157c-dk2: configure debug_ll UART
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/7] reset_source: add new Brownout reset (BOR) source
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] commands: don't use stale errno when calling fb_open
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] plathome-openblocks-a6: provide a kwbimage.cfg file
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: panic with a message when relocation type is unknown
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• simplefb question
  • From: Robin van der Gracht <robin@xxxxxxxxxxx>
• Re: [PATCH] ARM: panic with a message when relocation type is unknown
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: panic with a message when relocation type is unknown
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [RFC 2/4] serial: add litex UART driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [RFC 2/4] serial: add litex UART driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [RFC 0/4] riscv: add initial LiteX SoC support
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [RFC 0/4] riscv: add initial LiteX SoC support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 3/4] WIP: make it work on litex
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 4/4] riscv: add litex_defconfig
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 1/4] riscv: add initial LiteX SoC support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 2/4] serial: add litex UART driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] Documentation: add riscv mention
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] riscv: dts: erizo-generic: fix memory node name
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH] ARM: panic with a message when relocation type is unknown
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 3/3] ARM: rdu3: disable i210 network interface
  • From: Vivien Didelot <vivien.didelot@xxxxxxxxx>
• Re: [PATCH] ARM: panic with a message when relocation type is unknown
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 2/2] ARM: rdu1: reserve pstore memory region
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: imx: rdu1: disable FEC node
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: rdu2: extend boot script for eMMC boot
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: rdu2: reserve pstore memory region
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/4] ARM: rdu2: extend environment for netboot
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/4] ARM: rdu2: disable i210 network interface
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] ARM: zii-common: add missing stddef.h include
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: zii-imx8mq-dev: add defaultenv with simple boot configuration
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/3] ARM: zii-imx8mq-dev: add barebox and environment partition
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: rdu3: disable i210 network interface
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] ARM: panic with a message when relocation type is unknown
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH RFC] ARM: imx8: fix discrepancy between comment and code
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH RFC] ARM: imx8: fix discrepancy between comment and code
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] net: macb: dma_sync_* receive buffers
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• [PATCH 3/3] fixup! Documentation: Add zii-imx6-rdu2 board documentation
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH 2/3] fixup! Documentation: Add zii-imx7d-rpu2 board documentation
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH 1/3] fixup! Documentation: Add zii-vf610-dev board documentation
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] fs: Add a driver to access U-Boot environment variables
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/7] misc: Add a driver to expose U-Boot environment variable data
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] fs: Add a driver to access U-Boot environment variables
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 4/7] misc: Add a driver to expose U-Boot environment variable data
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 6/7] ARM: rdu2: Add U-Boot environment partitions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] scripts: kwboot: fix comparison with out-of-range constant
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 6/7] ARM: rdu2: Add U-Boot environment partitions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] fs: Add a driver to access U-Boot environment variables
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/7] misc: Add a driver to expose U-Boot environment variable data
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v4] gpio: add driver for PCF857x, PCA{85, 96}7x, and MAX732[89] I2C GPIO expanders
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] ZII boards documentation update
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/8] usb: ohci-hcd: Do not zero out DMA coherent memory
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 00/18] scripts: enable compilation on macOS
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] commands: Introduce memcpy_parse_options()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] libbb: Drop simple_itoa()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] libfile: Simplify read_full()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] kbuild: drop support for cc-ldoption
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] kbuild: remove unneeded patterns from distclean
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] Makefile-imx: replace static variant to dynamic for signing images
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 1/2] libfile: Simplify read_full()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/2] libfile: Do not return 0 from write_full()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] libbb: Drop simple_itoa()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] commands: Introduce memcpy_parse_options()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 3/4] Documentation: Add zii-imx6-rdu2 board documentation
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/4] Documentation: Add zii-imx7d-rpu2 board documentation
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 0/4] ZII boards documentation update
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/4] Documentation: Add zii-vf610-dev board documentation
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 4/4] Documentation: zii-imx8mq-dev: Update OpenOCD usage documentation
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v3] gpio: add driver for PCF857x, PCA{85, 96}7x, and MAX732[89] I2C GPIO expanders
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v3] gpio: add driver for PCF857x, PCA{85, 96}7x, and MAX732[89] I2C GPIO expanders
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [PATCH v2] gpio: add driver for PCF857x, PCA{85, 96}7x, and MAX732[89] I2C GPIO expanders
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• [PATCH 5/7] fs: Add a driver to access U-Boot environment variables
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 7/7] ARM: rdu1: Add U-Boot environment partition
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 4/7] misc: Add a driver to expose U-Boot environment variable data
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 6/7] ARM: rdu2: Add U-Boot environment partitions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/7] filetype: Allow specifying cdev's filetype explicitly
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 0/7] U-Boot environment data as a filesystem
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 3/7] drivers: Introduce late_platform_driver()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/7] filetype: Add "U-Boot environmemnt variable data" filetype
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 8/8] usb: ohci: Add dependency on HAS_DMA
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 7/8] usb: fsl_udc: Use dma_alloc_coherent() to get DMA address
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/8] net: rtl8169: Do not zero out DMA coherent memory
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 6/8] apbh: Use dma_alloc_coherent() to get DMA address
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 5/8] ahci: Do not zero out DMA coherent memory
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 3/8] nand: nand_mxs: Do not zero out DMA coherent memory
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 4/8] apbh: Do not zero out DMA coherent memory
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/8] usb: ohci-hcd: Do not zero out DMA coherent memory
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 1/4] Makefile-imx: replace static variant to dynamic for signing images
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v2] gpio: add driver for PCF857x, PCA{85, 96}7x, and MAX732[89] I2C GPIO expanders
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 10/18] scripts: use "compiler.h" endianness helpers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 15/18] scripts: imx-usb-loader: don't depend on unportable headers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 17/18] scripts: compiler.h: use Linux <endian.h> as default
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 12/18] scripts: removes uses of <asm*/errno.h> in favor of <errno.h>
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 00/18] scripts: enable compilation on macOS
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 05/18] scripts: compiler.h: don't include <stdint.h> twice
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 03/18] scripts: extract symbol offsets using target, not host, nm
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 06/18] scripts: don't depend on system <asm/types.h>
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 09/18] scripts: compiler.h: add endianness helpers for macOS
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 02/18] kbuild: Use ls(1) instead of stat(1) to obtain file size
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 01/18] kbuild: suppress warnings from 'getconf LFS_*'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 04/18] scripts: includes: restrict strlcpy prototype to glibc
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 18/18] scripts: compiler.h: support BSDs as well
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 13/18] scripts: omap3-usb-loader: don't depend on unportable le32toh
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 08/18] scripts: bareboximd: remove usage of loff_t
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 07/18] scripts: bareboxcrc32: remove usage of loff_t
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 11/18] scripts: mkimage: s/fdatasync/fsync/ on macOS & OpenBSD
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 14/18] scripts: omap3-usb-loader: drop unneeded header
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 16/18] scripts: kwbimage: fix build with non-glibc systems
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] clk: imx6: remove quirky clk_set_parent(LDB_diN_sel, pll5_video_div)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] clk: imx6: remove quirky clk_set_parent(LDB_diN_sel, pll5_video_div)
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2 1/5] clk: imx6: remove quirky clk_set_parent(LDB_diN_sel, pll5_video_div)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] clk: imx6: remove quirky clk_set_parent(LDB_diN_sel, pll5_video_div)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] clk: imx6: remove quirky clk_set_parent(LDB_diN_sel, pll5_video_div)
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] scripts: kwboot: fix comparison with out-of-range constant
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] clk: imx6: remove quirky clk_set_parent(LDB_diN_sel, pll5_video_div)
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2 1/5] clk: imx6: remove quirky clk_set_parent(LDB_diN_sel, pll5_video_div)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2 2/5] clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2 1/5] clk: imx6: remove quirky clk_set_parent(LDB_diN_sel, pll5_video_div)
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2 1/5] clk: imx6: remove quirky clk_set_parent(LDB_diN_sel, pll5_video_div)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] clk: imx6: work around LDB hang caused by ERR009219
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2 4/5] clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2 1/5] clk: imx6: remove quirky clk_set_parent(LDB_diN_sel, pll5_video_div)
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 1/4] Makefile-imx: replace static variant to dynamic for signing images
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 4/4] imx6: added fit image signature to the devicetree for PHYTEC boards
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH 3/4] i.mx6: signed boot: add habv4-imx6-gencsf.h to the flash header of the PHYTEC boards
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH 2/4] imx6, imx7, imx8: changing hardcoded suffix to variable
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH 1/4] Makefile-imx: replace static variant to dynamic for signing images
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH] kbuild: drop support for cc-ldoption
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH] kbuild: remove unneeded patterns from distclean
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH] fixup! ARM: at91: fix at91sama5_get_ddram_size for sama5d4
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: at91: correct __iomem 'qualifier' placement
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] clk: imx: vf610: correct __iomem 'qualifier' placement
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] fixup! ARM: at91: fix at91sama5_get_ddram_size for sama5d4
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: at91: correct __iomem 'qualifier' placement
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] of: partition: add no-fixup device tree property
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/9] ARM: at91: misc fixes and cleanup
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] clk: at91: fix compilation errors in sama5d2.c
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] lib: select BASE64 if BLOBGEN is selected
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] clk: imx: vf610: correct __iomem 'qualifier' placement
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/9] ARM: at91: misc fixes and cleanup
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] clk: at91: delete dead i2s/audio code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] clk: at91: fix compilation errors in sama5d2.c
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 4/4] of: partition: add no-fixup device tree property
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 1/9] ARM: at91: replace __raw_{readl, writel} of peripherals with readl, writel
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 0/9] ARM: at91: misc fixes and cleanup
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 6/9] arm: sama5d4: fix stack setup
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 2/9] ARM: at91: debug_ll: make UART base address configurable
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 8/9] ARM: at91: remove duplicate get_ddram_size code
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 9/9] clk: at91: fix warning about missing const-safety
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 3/9] ARM: at91: remove references to non-existing CONFIG_ARCH_AT91*
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 7/9] ARM: at91: fix at91sama5_get_ddram_size for sama5d4
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 4/9] ARM: at91: remove no-longer needed subarch #ifdefery
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 5/9] ARM: at91: remove #ifdefery around *_get_ddram_size helpers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] clk: at91: delete dead i2s/audio code
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] clk: at91: fix compilation errors in sama5d2.c
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] clk: at91: fix compilation errors in sama5d2.c
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] commands: mw: Use kstrto*() instead of simple_strtoul()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] clk: imx6: define an enum for ldb mux inputs
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] clk: imx6: remove quirky clk_set_parent(LDB_diN_sel, pll5_video_div)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] lib: select BASE64 if BLOBGEN is selected
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] clk: imx6: define an enum for ldb mux inputs
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] clk: imx6: Mask mmdc_ch1 handshake for periph2_sel and mmdc_ch1_axi_podf
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] clk: imx6: remove quirky clk_set_parent(LDB_diN_sel, pll5_video_div)
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v3] ARM: Initial OP-TEE support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] common: state: check length
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] images: remove forgotten occurences of *.imx-sram-img
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: imx8mq-evk: collapse BMOD switch superposition
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>