Hello Sascha, hello ML.
On 2019-07-10 9:58 a.m., Sascha Hauer wrote:
Hi Andreas,
On Mon, Jul 08, 2019 at 04:15:00PM +0200, Andreas Geisenhainer wrote:
We're running barebox an a Phytec PhyCORE AM335x platform, and the
behaviour does emerge for the default "barebox-am335x-phytec-phycore.img"
image from barebox.
I just tried to reproduce this on a beaglebone black as this is at least
the same SoC. Unfortunately I was not successful.
Unfortunately this disappeared after some changes and never came back.
Thanks for trying.
Does your barebox always crash or does the behaviour change when you try
adding debugging? you might want to add some putc_ll() at earlier places
to see how far you get.
It crashes every time, as far as i can tell, since there is no more output.
I'm working around the the problem for a bit, but will investigate further
into it. There should be a Beaglebone Black around here. I'll try to
reproduce it on this platform and get back to you.
kind regards
Andreas
--
_
__ _| |_ ___
/ _` | __/ __|
| (_| | |_\__ \
\__,_|\__|___/
Elektronik GmbH
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
