[PATCH 09/10] ARM: imx7d-zii-rpu2: Switch to using kernel DTS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Now that it is availible, switch to using kernel DTS.

Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
---
 arch/arm/dts/imx7d-zii-rpu2.dts | 608 +-------------------------------
 1 file changed, 7 insertions(+), 601 deletions(-)

diff --git a/arch/arm/dts/imx7d-zii-rpu2.dts b/arch/arm/dts/imx7d-zii-rpu2.dts
index 24a6d40f7..f8d6e8904 100644
--- a/arch/arm/dts/imx7d-zii-rpu2.dts
+++ b/arch/arm/dts/imx7d-zii-rpu2.dts
@@ -3,19 +3,17 @@
 /*
  * Copyright (C) 2018 Zodiac Inflight Innovations
  */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <arm/imx7d.dtsi>
+#include <arm/imx7d-zii-rpu2.dts>
 
 #include "imx7d-ddrc.dtsi"
 
 / {
-	model = "ZII RPU2 Board";
-	compatible = "zii,imx7d-zii-rpu2","fsl,imx7d";
-
 	chosen {
+		/*
+		 * Kernel DTS incorrectly specifies stdout-path as
+                 * &uart1, this can be removed once the fix trickles
+                 * down
+		 */
 		stdout-path = &uart2;
 	};
 
@@ -25,598 +23,6 @@
                  * the switch shared DT node with it, so we use that
                  * fact to create a desirable naming
 		 */
-		switch-eeprom = &switch0;
+		switch-eeprom = &switch;
 	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pinctrl_leds_debug>;
-		pinctrl-names = "default";
-
-		debug {
-			label = "zii:green:debug1";
-			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb_otg1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_otg1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-
-		reg_usb_otg2_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_otg2_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-
-		reg_sd1_vmmc: regulator@3 {
-			compatible = "regulator-fixed";
-			regulator-name = "VDD_SD1";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <200000>;
-			enable-active-high;
-		};
-
-		reg_can1_3v3: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "can1-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
-		};
-
-		reg_can2_3v3: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "can2-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-
-		reg_vref_1v8: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "vref-1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		wlreg_on: fixedregulator@100 {
-			compatible = "regulator-fixed";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-name = "wlreg_on";
-			gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <100>;
-			enable-active-high;
-		};
-
-		reg_3p3v: regulator-3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "GEN_3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_5p0v_main: regulator-5p0v-main {
-			compatible = "regulator-fixed";
-			regulator-name = "5V_MAIN";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&adc1 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&adc2 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&cpu0 {
-	arm-supply = <&sw1a_reg>;
 };
-
-&clks {
-	assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-	assigned-clock-rates = <884736000>;
-};
-
-&ecspi1 {
-	fsl,spi-num-chipselects = <1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
-
-	nor_flash: nor-flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "barebox";
-			reg = <0x0 0xc0000>;
-		};
-
-		partition@c0000 {
-			label = "barebox-environment";
-			reg = <0xc0000 0x40000>;
-		};
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&port_fec1>;
-	status = "okay";
-
-	mdio1: mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		switch0: switch0@0 {
-			compatible = "marvell,mv88e6085";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			eeprom-length = <512>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port@0 {
-					reg = <0>;
-					label = "eth_cu_1000_1";
-				};
-				port@1 {
-					reg = <1>;
-					label = "eth_cu_1000_2";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "pic";
-
-					fixed-link {
-						speed = <100>;
-						full-duplex;
-					};
-				};
-
-				port_fec1: port@5 {
-					reg = <5>;
-					label = "cpu";
-					ethernet = <&fec1>;
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-
-				port_fec2: port@6 {
-					reg = <6>;
-					label = "data";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-	};
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&port_fec1>;
-	fsl,magic-packet;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	nameplate_eeprom: at24c04@50 {
-		compatible = "atmel,24c04";
-		#address-cells=<1>;
-		#size-cells=<1>;
-		reg = <0x50>;
-	};
-
-	sandbox_eeprom: at24c04@52 {
-		compatible = "atmel,24c04";
-		reg = <0x52>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	scl-gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	pfuze3000@08 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&sdma {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	status = "okay";
-
-	rave-sp {
-		compatible = "zii,rave-sp-rdu2";
-		current-speed = <1000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		watchdog {
-			compatible = "zii,rave-sp-watchdog";
-			nvmem-cells = <&boot_source>;
-			nvmem-cell-names = "boot-source";
-		};
-
-		eeprom@a3 {
-			compatible = "zii,rave-sp-eeprom";
-			reg = <0xa3 0x4000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			zii,eeprom-name = "main-eeprom";
-
-			boot_source: boot-source@83 {
-				reg = <0x83 1>;
-			};
-		};
-	};
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	keep-power-in-suspend;
-	bus-width = <4>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	non-removable;
-	no-1-8-v;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&wdog1 {
-	fsl,wdog_b;
-};
-
-
-&iomuxc {
-	pinctrl_leds_debug: debuggrp {
-		fsl,pins = <
-		MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x59 /* HB_LED */
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-		MX7D_PAD_SD2_CD_B__ENET1_MDIO                           0x3
-		MX7D_PAD_SD2_WP__ENET1_MDC                              0x3
-		MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC               0x1
-		MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0               0x1
-		MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1               0x1
-		MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2               0x1
-		MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3               0x1
-		MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL         0x1
-		MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC               0x1
-		MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0               0x1
-		MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1               0x1
-		MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2               0x1
-		MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3               0x1
-		MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL         0x1
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-		MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC                     0x1
-		MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0                    0x1
-		MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1                    0x1
-		MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2                    0x1
-		MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3                     0x1
-		MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL                  0x1
-		MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC                    0x1
-		MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0                    0x1
-		MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1                     0x1
-		MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2                     0x1
-		MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3                    0x1
-		MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL                 0x1
-		MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT           0x1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-		MX7D_PAD_I2C1_SDA__I2C1_SDA             0x4000007f
-		MX7D_PAD_I2C1_SCL__I2C1_SCL             0x4000007f
-		>;
-	};
-
-	pinctrl_i2c1_gpio: i2c1gpiogrp {
-		fsl,pins = <
-		MX7D_PAD_I2C1_SDA__GPIO4_IO9            0x4000007f
-		MX7D_PAD_I2C1_SCL__GPIO4_IO8            0x4000007f
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-		MX7D_PAD_I2C2_SDA__I2C2_SDA             0x4000007f
-		MX7D_PAD_I2C2_SCL__I2C2_SCL             0x4000007f
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2gpiogrp {
-		fsl,pins = <
-		MX7D_PAD_I2C2_SDA__GPIO4_IO11           0x4000007f
-		MX7D_PAD_I2C2_SCL__GPIO4_IO10           0x4000007f
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-		MX7D_PAD_I2C3_SDA__I2C3_SDA             0x4000007f
-		MX7D_PAD_I2C3_SCL__I2C3_SCL             0x4000007f
-		>;
-	};
-
-	pinctrl_i2c3_gpio: i2c3gpiogrp {
-		fsl,pins = <
-		MX7D_PAD_I2C3_SDA__GPIO4_IO13           0x4000007f
-		MX7D_PAD_I2C3_SCL__GPIO4_IO12           0x4000007f
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-		MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA         0x4000007f
-		MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL         0x4000007f
-		>;
-	};
-
-	pinctrl_i2c4_gpio: i2c4gpiogrp {
-		fsl,pins = <
-		MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17       0x4000007f
-		MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16       0x4000007f
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-		MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK       0x2
-		MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI       0x2
-		MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO       0x2
-		MX7D_PAD_ECSPI1_SS0__GPIO4_IO19         0x59
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-		MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX    0x79
-		MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX    0x79
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-		MX7D_PAD_SD2_DATA0__UART4_DCE_RX        0x79
-		MX7D_PAD_SD2_DATA1__UART4_DCE_TX        0x79
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-		MX7D_PAD_SD1_CMD__SD1_CMD               0x59
-		MX7D_PAD_SD1_CLK__SD1_CLK               0x19
-		MX7D_PAD_SD1_DATA0__SD1_DATA0           0x59
-		MX7D_PAD_SD1_DATA1__SD1_DATA1           0x59
-		MX7D_PAD_SD1_DATA2__SD1_DATA2           0x59
-		MX7D_PAD_SD1_DATA3__SD1_DATA3           0x59
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-		MX7D_PAD_SD3_CMD__SD3_CMD               0x59
-		MX7D_PAD_SD3_CLK__SD3_CLK               0x19
-		MX7D_PAD_SD3_DATA0__SD3_DATA0           0x59
-		MX7D_PAD_SD3_DATA1__SD3_DATA1           0x59
-		MX7D_PAD_SD3_DATA2__SD3_DATA2           0x59
-		MX7D_PAD_SD3_DATA3__SD3_DATA3           0x59
-		MX7D_PAD_SD3_DATA4__SD3_DATA4           0x59
-		MX7D_PAD_SD3_DATA5__SD3_DATA5           0x59
-		MX7D_PAD_SD3_DATA6__SD3_DATA6           0x59
-		MX7D_PAD_SD3_DATA7__SD3_DATA7           0x59
-		MX7D_PAD_SD3_RESET_B__SD3_RESET_B       0x59
-		>;
-	};
-};
-
-- 
2.21.0


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux