> On Thu, 11 Jul 2019 15:30:01 +0200 > Benjamin Beckmeyer <beb@xxxxxxxxxxxx> wrote: > >> Hey all, >> is there a possibility to read/write specific registers from/to different MII addresses? >> >> I know that there is miitool but it just can give me the first 16 registers of a PHY. >> But I need write specific registers e.g. MII addr 2 register 0 and read MII addr 2 >> register 1. I know uboot is having the mii command(exactly what I would need), and I >> have seen that there were parameters for address and register in miitool but they >> were deleted lastly. >> > Hi Benjamin! > > You can use /dev/mdio* devices for reading/writing MII registers. > E.g. > md -s /dev/mdio0-phy00 > mw -d /dev/mdio0-phy00 -w 0 0x12345678 > > Just after barebox boot there is no /dev/mdio* devices. > After network interface initialization (e.g. after ifup command) or > after miitool command the /dev/mdio* devices appear. Hi Antony, thanks for your reply. That will help me a lot. Best regards, Benjamin _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
