Linux RAID Storage
[Prev Page][Next Page]
- Making bootable SATA RAID1 array in Mandriva 2006,
andy liebman
- Incative RAID5 (it should be active),
Jacob Madsen
- [bug?] raid1 integrity checking is broken on 2.6.18-rc4,
Chuck Ebbert
- drive is a spare, but I want to make it active - how?,
Tomasz Chmielewski
- way too high reconstruction speed - bug?,
Tomasz Chmielewski
- RAID-10 and 4 HDDs - how many HDDs can break without loosing data?,
Tomasz Chmielewski
- How does linux soft-raid resolve the inconsistency after a system crash?, liyiming
- resize new raid problem,
Serge Torop
- modifying degraded raid 1 then re-adding other members is bad,
Alexandre Oliva
- Resize on dirty array?,
James Peverill
slow resync during mdadm --create, Mahendra
Re: [patch] raid1: allow user to force reads from a specific disk, Chuck Ebbert
ANNOUNCE: mdadm 2.5.3 - A tool for managing Soft RAID under Linux, Neil Brown
[patch] raid1: allow user to force reads from a specific disk,
Chuck Ebbert
issue with mdadm ver1 sb and bitmap on x86_64, Mike Snitzer
raid5/lvm setup questions,
Shane
raid1 oops, 2.6.16,
Jason Lunz
Raid5 bitmap - Bug in bitmap_startwrite(),
Francois Barre
Re: Raid5 hardware failure, Neil Brown
[BUG] raid1: barrier retry does not work correctly with write-behind,
Paul Clements
Mdadm problem?,
A.J.Dawson
[PATCH] md: Fix a bug that recently crept into md/linear, NeilBrown
[PATCH 000 of 9] md: Introduction - assorted cleanup and minor fixes,
NeilBrown
Re: let md auto-detect 128+ raid members, fix potential race condition,
Neil Brown
[RFC: 2.6 patch] the scheduled removal of the START_ARRAY ioctl for md, Adrian Bunk
[PATCH 0/2] Fix RAID5 + IA64 compile,
Prarit Bhargava
Linux software raid: Status and plan ?, Robert Haas
Weird blocks at fsync() calls using md,
Sander Smeenk
Re: [PATCH 001 of 006] raid5: Move write operations to a work queue,
Yuri Tikhonov
ICH7R "strip" size,
Jeff Woods
Grub vs Lilo,
Lewis Shobbrook
host based mirror distance in a fc-based SAN environment,
Stefan Majer
FIXED : brute-force my RAID 5 - just some fsck errors.., Sevrin Robstad
write back cache and barrier questions, marco
[PATCH] md: new bitmap sysfs interface,
Paul Clements
Drives of same model in RAID 1/10 ?,
Mark Hellman
Dell PowerEdge Expandable RAID Controller 4e/Di,
Pieter Steyn
I travelled twice in the past !!,
Edouard Gaulué
raid from2.6 kernel not recognized under 2.4, Daniel J. Priem
Better Success, world-sobered, Kimberley Mcclure
[RTLWS8-CFP] Eighth Real-Time Linux Workshop 2nd CFP, mcguire
Serious XFS bug in 2.6.17 kernels - FYI, David Greaves
Megaraid, howto?,
Pieter Steyn
Is it possible to recover data after resync?,
Alex Davis
raid5.h documentation,
Raz Ben-Jehuda(caro)
md reports: unknown partition table,
David Greaves
read-ahead cache on indiv. raid members and entire md device, Roy Waldspurger
which disk the the one that data is on?,
Shai
Re: XFS and write barrier,
Nathan Scott
mdadm -X bitmap status off by 2^16,
Janos Farkas
Raid and LVM and LILO,
Du
Still can't get md arrays that were started from an initrd to shutdown,
Christian Pernegger
troubleshooting PNY S-cure, whc86 (sent by Nabble.com)
Problem with --manage,
Benjamin Schieder
Tuning the I/O scheduler for md?, Christian Pernegger
trying to "brute-force" my RAID 5...,
Sevrin Robstad
Re: trying to "brute-force" my RAID 5..., Neil Brown
<Possible follow-ups>
Re: trying to "brute-force" my RAID 5..., Sevrin Robstad
Random Seek on Array as slow as on single disk,
A. Liemen
Can't add disk to failed raid array,
Paul Waldo
Re: Can't add disk to failed raid array, Paul Waldo
Booting issue - rebooting also,
Vladimir Strycek
Where is MD Device Layer,
linuxmania . lizhi
Hardware assisted parity computation - is it now worth it?,
Burn Alting
PLEASE HELP ... raid5 array degraded ...,
Andrew Skolarz
Raid5 Reshape Status + xfs_growfs = Success! (2.6.17.3),
Justin Piszcz
SWRaid Wiki,
Francois Barre
Problem with 3xRAID1 to RAID 0,
Vladimir Strycek
Test feedback 2.6.17.4+libata-tj-stable (EH, hotplug),
Christian Pernegger
ICH7 sata-ahci + software raid warning,
Christian Pernegger
only 4 spares and no access to my data,
Karl Voit
PLease help me reconstruct my array (RAID 5 ) if possible., Sevrin Robstad
Resizing RAID-1 arrays - some possible bugs and problems,
Reuben Farrelly
Setting up mdadm.conf for UUID?,
Ewan Grantham
Kernel 2.6.17 and RAID5 Grow Problem (critical section backup),
Justin Piszcz
Mounting array was read write for about 3 minutes, then Read-only file system error,
Brian Bonner
Array will not assemble,
Richard Scobie
zeroing old superblocks & upgrading...,
John Stoffel
second controller: what will my discs be called, and does it matter?,
Dexter Filmore
issue with internal bitmaps,
Luca Berra
Can't get md array to shut down cleanly,
Christian Pernegger
Linux SATA Support Question - Is the ULI M1575 chip supported?,
Justin Piszcz
How does md determine which partitions to use in RAID1 when DEVICE partitions is specified,
Brian Bonner
RAID 5 crash, is there any way to recover some data ?,
Sevrin Robstad
[PATCH] enable auto=yes by default when using udev,
Luca Berra
changing MD device names,
Jon Lewis
degraded raid5 refuses to start,
Jason Lunz
Strange intermittant errors + RAID doesn't fail the disk.,
Christian Pernegger
raid issues after power failure,
Ákos Maróy
Re: [PATCH 000 of 006] raid5: Offload RAID operations to a workqueue, Dan Williams
RAID resync after every boot?,
Christian Pernegger
Cutting power without breaking RAID,
Niccolo Rigacci
[PATCH 003 of 006] raid5: Move compute block operations to a work queue, Dan Williams
[PATCH 000 of 006] raid5: Offload RAID operations to a workqueue,
Dan Williams
[PATCH 006 of 006] raid5: Remove compute_block and compute_parity, Dan Williams
[PATCH 001 of 006] raid5: Move write operations to a work queue, Dan Williams
[PATCH 004 of 006] raid5: Move read completion copies to a work queue,
Dan Williams
[PATCH 005 of 006] raid5: Move expansion operations to a work queue,
Dan Williams
[PATCH 002 of 006] raid5: Move check parity operations to a work queue, Dan Williams
When will the Areca RAID driver be merged into mainline?,
Justin Piszcz
ANNOUNCE: mdadm 2.5.2 - A tool for managing Soft RAID under Linux,
Neil Brown
[PATCH 000 of 12] md: Introduction,
NeilBrown
- [PATCH 002 of 12] md: Set desc_nr correctly for version-1 superblocks., NeilBrown
- [PATCH 009 of 12] md: Require CAP_SYS_ADMIN for (re-)configuring md devices via sysfs., NeilBrown
- [PATCH 011 of 12] md: Fix "Will Configure" message when interpreting md= kernel parameter., NeilBrown
- [PATCH 001 of 12] md: Possible fix for unplug problem, NeilBrown
- [PATCH 007 of 12] md: Fix usage of wrong variable in raid1, NeilBrown
- [PATCH 006 of 12] md: Fix some small races in bitmap plugging in raid5., NeilBrown
- [PATCH 012 of 12] md: Include sector number in messages about corrected read errors., NeilBrown
- [PATCH 010 of 12] md: Remove a variable that is now unused., NeilBrown
- [PATCH 003 of 12] md: Delay starting md threads until array is completely setup., NeilBrown
- [PATCH 005 of 12] md: Fix a plug/unplug race in raid5, NeilBrown
- [PATCH 008 of 12] md: Unify usage of symbolic names for perms., NeilBrown
- [PATCH 004 of 12] md: Fix resync speed calculation for restarted resyncs., NeilBrown
[-mm patch] drivers/md/raid5.c: remove an unused variable, Adrian Bunk
Re: recover data from linear raid,
Dimitris Zilaskos
Multiple raids on one machine?,
Chris Allen
RAID5 degraded after mdadm -S, mdadm --assemble (everytime),
Ronald Lembcke
Curious code in autostart_array,
Pete Zaitcev
Large single raid and XFS or two small ones and EXT3?,
Chris Allen
Re: Ok to go ahead with this setup?,
Molle Bestefich
[-mm patch] drivers/md/md.c: make code static, Adrian Bunk
bitmap status question,
David Greaves
New FAQ entry? (was IBM xSeries stop responding during RAID1 reconstruction),
Niccolo Rigacci
[PATCH*2] mdadm works with uClibc from SVN,
Nix
[patch] typo, Ming Zhang
--dangerous-no-resync, Ming Zhang
read perfomance patchset,
Raz Ben-Jehuda(caro)
Is shrinking raid5 possible?,
Paul Davidson
the question about raid0_make_request,
liu yang
SW RAID 5 Bug? - Slow After Rebuild (XFS+2.6.16.20), Justin Piszcz
Raid5 reshape,
Tim
ANNOUNCE: mdadm 2.5.1 - A tool for managing Soft RAID under Linux,
Neil Brown
Failing HDD and Mirror Raid, Michael Rudmin
Raid5 software problems after loosing 4 disks for 48 hours,
Wilson Wilson
Help with dirty RAID array,
James H. Edwards
raid6,
葛雄资
Call for help of raid5, 葛雄资
IBM xSeries stop responding during RAID1 reconstruction,
Niccolo Rigacci
A log of thanks, and some question. :), Janos Haar
why raid5 not like this?,
舒星
to understand the logic of raid0_make_request,
liu yang
RAID5 troubles,
osk
Failed Hard Disk... help!,
David M. Strang
which CPU for XOR?,
Dexter Filmore
And then there was Bryce...,
Bryce
"command 0x25 timeout, stat 0x50 host_stat 0x1",
Andy Smith
[Index of Archives]
[Linux RAID Wiki]
[Linux Block]
[ATA RAID]
[Kernel]
[Linux SCSI]
[Linux iSCSI]
[Linux SCSI Target Infrastructure]
[Linux Books]
