Linux Kernel Newbies
[Prev Page][Next Page]
- auxiliary bus/drivers feature set versus platform/mfd
- From: "Billie Alsup (balsup)" <balsup@xxxxxxxxx>
- Userspace or kernelspace driver once again
- From: Patryk <pbiel7@xxxxxxxxx>
- Re: git send-email and gmail smtp
- From: Konstantin Ryabitsev <konstantin@xxxxxxxxxxxxxxxxxxx>
- Re: git send-email and gmail smtp
- From: Siddh Raman Pant <sanganaka@xxxxxxxx>
- Re: git send-email and gmail smtp
- From: Ezra Buehler <ezra@xxxxxxxx>
- git send-email and gmail smtp
- From: jim.cromie@xxxxxxxxx
- Re: uboot and kernel entry point, load address for booting kernel from FIT image
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- uboot and kernel entry point, load address for booting kernel from FIT image
- From: Lev Olshvang <levonshe@xxxxxxxxxx>
- Re: Seeking help addressing maintainer objections
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: Seeking help addressing maintainer objections
- From: Ian Pilcher <arequipeno@xxxxxxxxx>
- Re: Seeking help addressing maintainer objections
- From: Bjørn Mork <bjorn@xxxxxxx>
- Seeking help addressing maintainer objections
- From: Ian Pilcher <arequipeno@xxxxxxxxx>
- Compile error on Rasperry PI arm64 in arch/arm64/kvm/hyp/nvhe/gen-hyprel
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Netlink protocol
- From: Abdulrasaq Lawani <abdulrasaqolawani@xxxxxxxxx>
- Re: Coding style when using atomic_dec_and_test
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Coding style when using atomic_dec_and_test
- From: Camila Alvarez Inostroza <cam.alvarez.i@xxxxxxxxx>
- Re: Controlling the same I2C device from user and kernel space
- From: Patryk <pbiel7@xxxxxxxxx>
- Controlling the same I2C device from user and kernel space
- From: Patryk <pbiel7@xxxxxxxxx>
- Fwd: Mail delivery failed: returning message to sender
- From: daniel watson <ozzloy@xxxxxxx>
- EFAULT for sending UDP from LKM
- From: Jaydeep Das <jaydeepjd.8914@xxxxxxxxx>
- Translation fault while using mmu-600 (only when dma alloc is done during application on the fly)
- From: 김찬 <ckim@xxxxxxxxxx>
- Porting Interrupt registertion code from kernel 2.6 to kernel 4.14
- From: "Khalid F. Sabzwari" <kfsabzwari@xxxxxxxxx>
- Re: Seeking Suggestions for Open Source Projects to Contribute to as a New Contributor
- From: Pragati Ghatte <ghattepragati7@xxxxxxxxx>
- Re: Which tree to track: linux-next or staging?
- From: Jonathan Bergh <bergh.jonathan@xxxxxxxxx>
- Re: Which tree to track: linux-next or staging?
- From: Konstantin Ryabitsev <konstantin@xxxxxxxxxxxxxxxxxxx>
- Re: Seeking Suggestions for Open Source Projects to Contribute to as a New Contributor
- From: AYAN KUMAR HALDER <ayankumarh@xxxxxxxxx>
- Seeking Suggestions for Open Source Projects to Contribute to as a New Contributor
- From: Pragati Ghatte <ghattepragati7@xxxxxxxxx>
- Which tree to track: linux-next or staging?
- From: Jonathan Bergh <bergh.jonathan@xxxxxxxxx>
- Google Summer of Code / Mentorship Opportunity
- From: Isaac Cilia Attard <iciliaat@xxxxxxxxx>
- Re: PHY drivers
- From: achraf boussetta <boussettaachraf26@xxxxxxxxx>
- PHY drivers
- From: Patryk <pbiel7@xxxxxxxxx>
- Re: Before submitting a driver for Casper Excalibur Laptops
- From: Greg KH <greg@xxxxxxxxx>
- Before submitting a driver for Casper Excalibur Laptops
- From: Mustafa Ekşi <mustafa.eskieksi@xxxxxxxxx>
- Re: firefox does not start with 6.8-rc
- From: Greg KH <greg@xxxxxxxxx>
- firefox does not start with 6.8-rc
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Re: Boot log before panic
- From: Mandeep Sandhu <mandeepsandhu.chd@xxxxxxxxx>
- Boot log before panic
- From: Abdulrasaq Lawani <abdulrasaqolawani@xxxxxxxxx>
- Re: Kernelnewbies
- From: Greg KH <greg@xxxxxxxxx>
- Completion wait timeout error thrown by i2c-ismt.c driver
- From: "Rahul Gore (Nokia)" <rahul.gore@xxxxxxxxx>
- Re: Generic USB LED HID driver
- From: Kirill Yatsenko <kirill31051997f@xxxxxxxxx>
- Re: Generic USB LED HID driver
- From: Greg KH <greg@xxxxxxxxx>
- Re: Generic USB LED HID driver
- From: Kirill Yatsenko <kirill31051997f@xxxxxxxxx>
- Re: Generic USB LED HID driver
- From: Greg KH <greg@xxxxxxxxx>
- Generic USB LED HID driver
- From: Kirill Yatsenko <kirill31051997f@xxxxxxxxx>
- Lost memory
- From: Andrea Tomassetti <andrea.tomassetti-opensource@xxxxxxxx>
- Re: Boot stucks at "Loading initial ramdisk"
- From: Dileep Sankhla <dileepsankhla.ds@xxxxxxxxx>
- Re: Boot stucks at "Loading initial ramdisk"
- From: Aditya Gupta <adityag@xxxxxxxxxxxxx>
- Re: Boot stucks at "Loading initial ramdisk"
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Information about interrupt in userpace
- From: Patryk <pbiel7@xxxxxxxxx>
- Re: Re: Boot stucks at "Loading initial ramdisk"
- From: Dileep Sankhla <dileepsankhla.ds@xxxxxxxxx>
- Re: Re: Boot stucks at "Loading initial ramdisk"
- From: Aditya Gupta <adityag@xxxxxxxxxxxxx>
- Backtracing to find the assignment of a null pointer.
- From: Dileep Sankhla <dileepsankhla.ds@xxxxxxxxx>
- Re: Identifying the initial bug within the x86 architecture subsystem
- From: Dileep Sankhla <dileepsankhla.ds@xxxxxxxxx>
- Re: Identifying the initial bug within the x86 architecture subsystem
- From: Greg KH <greg@xxxxxxxxx>
- Re: Identifying the initial bug within the x86 architecture subsystem
- From: Dileep Sankhla <dileepsankhla.ds@xxxxxxxxx>
- Re: Identifying the initial bug within the x86 architecture subsystem
- From: Greg KH <greg@xxxxxxxxx>
- Identifying the initial bug within the x86 architecture subsystem
- From: Dileep Sankhla <dileepsankhla.ds@xxxxxxxxx>
- Re: Boot stucks at "Loading initial ramdisk"
- From: Dileep Sankhla <dileepsankhla.ds@xxxxxxxxx>
- mtd0 device is missing in /sys/class/mtd
- From: Manojkiran Eda <manojkiran.eda@xxxxxxxxx>
- Re: Boot stucks at "Loading initial ramdisk"
- From: Dileep Sankhla <dileepsankhla.ds@xxxxxxxxx>
- Re: Boot stucks at "Loading initial ramdisk"
- From: Dileep Sankhla <dileepsankhla.ds@xxxxxxxxx>
- Re: Boot stucks at "Loading initial ramdisk"
- From: Dileep Sankhla <dileepsankhla.ds@xxxxxxxxx>
- Re: Boot stucks at "Loading initial ramdisk"
- From: Soumya Negi <soumya.negi97@xxxxxxxxx>
- Re: Boot stucks at "Loading initial ramdisk"
- From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
- Re: Boot stucks at "Loading initial ramdisk"
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Boot stucks at "Loading initial ramdisk"
- From: Dileep Sankhla <dileepsankhla.ds@xxxxxxxxx>
- why high io requests will slow down kernel scheduling?
- From: kipade <kipade@xxxxxxx>
- Insight into Load, Runnable, and Utilization Averages in Linux Scheduler Code
- From: iso m <isomorphik.ibm@xxxxxxxxx>
- Re: when/how is the schedule() function actually called?
- From: "Billie Alsup (balsup)" <balsup@xxxxxxxxx>
- Question regarding FlexSPI controller available on NXP boards
- From: Patryk <pbiel7@xxxxxxxxx>
- Re: when/how is the schedule() function actually called?
- From: Dawei Li <daweilics@xxxxxxxxx>
- Re: from CoLinux to MoreLinux :D
- From: Mario Marietto <marietto2008@xxxxxxxxx>
- Re: from CoLinux to MoreLinux :D
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- Re: from CoLinux to MoreLinux :D
- From: Mario Marietto <marietto2008@xxxxxxxxx>
- Re: from CoLinux to MoreLinux :D
- From: Mario Marietto <marietto2008@xxxxxxxxx>
- Re: from CoLinux to MoreLinux :D
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- Re: from CoLinux to MoreLinux :D
- From: Mario Marietto <marietto2008@xxxxxxxxx>
- Re: when/how is the schedule() function actually called?
- From: iso m <isomorphik.ibm@xxxxxxxxx>
- Re: when/how is the schedule() function actually called?
- From: "Billie Alsup (balsup)" <balsup@xxxxxxxxx>
- Re: when/how is the schedule() function actually called?
- From: Dawei Li <daweilics@xxxxxxxxx>
- Re: when/how is the schedule() function actually called?
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- when/how is the schedule() function actually called?
- From: Dawei Li <daweilics@xxxxxxxxx>
- Re: from CoLinux to MoreLinux :D
- From: Mario Marietto <marietto2008@xxxxxxxxx>
- Re: from CoLinux to MoreLinux :D
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- Re: from CoLinux to MoreLinux :D
- From: Mario Marietto <marietto2008@xxxxxxxxx>
- Re: from CoLinux to MoreLinux :D
- From: Mario Marietto <marietto2008@xxxxxxxxx>
- Re: Linux 4 block device driver infrastructure
- From: jim.cromie@xxxxxxxxx
- Re: from CoLinux to MoreLinux :D
- From: jim.cromie@xxxxxxxxx
- Re: Setting CPUFreq scaling governor to performance not setting CPU frequency to the highest
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
- Setting CPUFreq scaling governor to performance not setting CPU frequency to the highest
- From: Vigneshwar S <svigneshj@xxxxxxxxx>
- Re: from CoLinux to MoreLinux :D
- From: Mario Marietto <marietto2008@xxxxxxxxx>
- Re: from CoLinux to MoreLinux :D
- From: Mario Marietto <marietto2008@xxxxxxxxx>
- Re: from CoLinux to MoreLinux :D
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- from CoLinux to MoreLinux :D
- From: Mario Marietto <marietto2008@xxxxxxxxx>
- Fwd: Linux 4 block device driver infrastructure
- From: Alexandru Goia <goia.i.alexandru@xxxxxxxxx>
- Linux 4 block device driver infrastructure
- From: Alexandru Goia <goia.i.alexandru@xxxxxxxxx>
- Re: how to find the octeon driver in menuconfig?
- From: Jeremi Piotrowski <jeremi.piotrowski@xxxxxxxxx>
- how to find the octeon driver in menuconfig?
- From: Chen shuo <1289151713@xxxxxx>
- Re: What situation will an anonymous writer come?
- From: jim.cromie@xxxxxxxxx
- how to use perf record effectively
- From: jim.cromie@xxxxxxxxx
- What situation will an anonymous writer come?
- From: mlin@xxxxxxxxxxxxxxxx
- How should I integrate my SPI driver into kernel?
- From: Patryk <pbiel7@xxxxxxxxx>
- Re: Sharing the same SPI between two devices.
- From: "Billie Alsup (balsup)" <balsup@xxxxxxxxx>
- Re: Sharing the same SPI between two devices.
- From: Lucas Tanure <tanure@xxxxxxxxx>
- Sharing the same SPI between two devices.
- From: Patryk <pbiel7@xxxxxxxxx>
- How can I make dma_alloc to use the device's reserved memory?
- From: 김찬 <ckim@xxxxxxxxxx>
- Re: How to switch driver from wireless extension to cfg/mac80211
- From: jim.cromie@xxxxxxxxx
- help - macro arg reuse - fix ?
- From: jim.cromie@xxxxxxxxx
- How to switch driver from wireless extension to cfg/mac80211
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Why does kernel has different commandline options to disable Local APIC and I/O APIC?
- From: Mushahid Hussain <mushi.shar@xxxxxxxxx>
- Re: ktypes vs. devices classes (struct class)
- From: Greg KH <greg@xxxxxxxxx>
- Re: ktypes vs. devices classes (struct class)
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- Re: ktypes vs. devices classes (struct class)
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- Re: ktypes vs. devices classes (struct class)
- From: Greg KH <greg@xxxxxxxxx>
- Re: ktypes vs. devices classes (struct class)
- From: Greg KH <greg@xxxxxxxxx>
- ktypes vs. devices classes (struct class)
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- Re: Kernelnewbies Digest, Vol 154, Issue 14
- From: Michael <mail@xxxxxxxxx>
- Re: Kernel Improvements
- From: Michael <mail@xxxxxxxxx>
- Kernel improvements.
- From: Juro Dobrík <dobrik.juro@xxxxxxxxx>
- Re: [Question] dt bindings for BeagleConnect
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [Question] dt bindings for BeagleConnect
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [Question] dt bindings for BeagleConnect
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: Small MSS in vmxnet3
- From: Naruto Nguyen <narutonguyen2018@xxxxxxxxx>
- Re: [Question] dt bindings for BeagleConnect
- From: Ayush Singh <ayushdevel1325@xxxxxxxxx>
- [Question] dt bindings for BeagleConnect
- From: Ayush Singh <ayushdevel1325@xxxxxxxxx>
- Small MSS in vmxnet3
- From: Naruto Nguyen <narutonguyen2018@xxxxxxxxx>
- Re: Kernel freeze down while booting
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Kernel freeze down while booting
- From: Christian Stalp <cstalp@xxxxxxxxxx>
- Re: How to support maintainers
- From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
- How to support maintainers
- From: Lucas Tanure <tanure@xxxxxxxxx>
- Re: Neovim LSP with Linux Kernel
- From: "Ricardo B. Marliere" <ricardo@xxxxxxxxxxxx>
- Re: Neovim LSP with Linux Kernel
- From: Maciej Wieczór-Retman <maciej.wieczor-retman@xxxxxxxxx>
- Re: Neovim LSP with Linux Kernel
- From: "Ricardo B. Marliere" <ricardo@xxxxxxxxxxxx>
- Neovim LSP with Linux Kernel
- From: Maciej Wieczór-Retman <maciej.wieczor-retman@xxxxxxxxx>
- Best file system for NAND flash
- From: JeongHwan Kim <frog007.kernel.kr@xxxxxxxxx>
- Re: Debugging i2c : i2cdetect cant detect a device on i2c line
- From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
- Re: Question regarding Linux-6.1, rootfs and ADC
- From: Parastoo Ebrahimzadeh <parastoo.ebrahimzadeh@xxxxxxxxxxx>
- Re: Question regarding Linux-6.3.5 and Sunxi A20 NAND/NFC support
- From: John Watts <contact@xxxxxxxxxx>
- Re: Adding compatible string to standard UART
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- RE: A question on endpoint_test code in the linux source by Kishon Vijay Abraham I.
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- A question on endpoint_test code in the linux source by Kishon Vijay Abraham I.
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Debugging i2c : i2cdetect cant detect a device on i2c line
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: Debugging i2c : i2cdetect cant detect a device on i2c line
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: Debugging i2c : i2cdetect cant detect a device on i2c line
- From: Lucas Tanure <tanure@xxxxxxxxx>
- Re: Debugging i2c : i2cdetect cant detect a device on i2c line
- From: Raul Piper <raulpblooper@xxxxxxxxx>
- Re: Debugging i2c : i2cdetect cant detect a device on i2c line
- From: Lucas Tanure <tanure@xxxxxxxxx>
- Re: Debugging i2c : i2cdetect cant detect a device on i2c line
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Debugging i2c : i2cdetect cant detect a device on i2c line
- From: Raul Piper <raulpblooper@xxxxxxxxx>
- Mutt labeling
- From: Maciej Wieczór-Retman <maciej.wieczor-retman@xxxxxxxxx>
- Adding compatible string to standard UART
- From: Ayush Singh <ayushdevel1325@xxxxxxxxx>
- Re: What is retpoline ?
- From: Halil Demirezen <halil@xxxxxxxxxxxxx>
- What is retpoline ?
- From: "Axel M." <axel.moittier@xxxxx>
- gpio-it87: gpiod_get*() always return -ENOENT
- From: "Alexander Ivanov" <amivanov@xxxxxxxxxxxx>
- how to fix MACRO_ARG_REUSE
- From: jim.cromie@xxxxxxxxx
- forcibly disable config
- From: Oleksii <inisider@xxxxxxxxx>
- dma_alloc for pcie_device, how can I allocate from the pci device memory?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Seeking Guidance for New SPI Driver in Mainline Linux Kernel
- From: Muni Sekhar <munisekharrms@xxxxxxxxx>
- Re: Seeking Guidance for New SPI Driver in Mainline Linux Kernel
- From: Raul Piper <raulpblooper@xxxxxxxxx>
- Enable UART after driver removal without reboot
- From: Ayush Singh <ayushdevel1325@xxxxxxxxx>
- Seeking Guidance for New SPI Driver in Mainline Linux Kernel
- From: Muni Sekhar <munisekharrms@xxxxxxxxx>
- Seeking Guidance for New SPI Driver in Mainline Linux Kernel
- From: Muni Sekhar <munisekharrms@xxxxxxxxx>
- Re: Question regarding Linux-6.3.5 and Sunxi A20 NAND/NFC support
- From: Fawad Lateef <fawadlateef@xxxxxxxxx>
- Re: Question regarding Linux-6.3.5 and Sunxi A20 NAND/NFC support
- From: Fawad Lateef <fawadlateef@xxxxxxxxx>
- amd-pstate: Setting the maximum frequency in guided mode
- From: Siddh Raman Pant <sanganaka@xxxxxxxx>
- Re: Question regarding Linux-6.3.5 and Sunxi A20 NAND/NFC support
- From: Fawad Lateef <fawadlateef@xxxxxxxxx>
- Question regarding Linux-6.3.5 and Sunxi A20 NAND/NFC support
- From: Fawad Lateef <fawadlateef@xxxxxxxxx>
- Re: Using net/wan/hdlc with serdev
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: Using net/wan/hdlc with serdev
- From: Ayush Singh <ayushdevel1325@xxxxxxxxx>
- Getting a DMA channel on x86 for a PCIe transfer
- From: johannes@gnu-linux.rocks
- Re: Looking for ways to contribute
- From: <ozlinux@xxxxxxxxxxx>
- Re: Looking for ways to contribute
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- Re: Looking for ways to contribute
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Re: Looking for ways to contribute
- From: Mario Marietto <marietto2008@xxxxxxxxx>
- Looking for ways to contribute
- From: <ozlinux@xxxxxxxxxxx>
- Using net/wan/hdlc with serdev
- From: Ayush Singh <ayushdevel1325@xxxxxxxxx>
- Re: Neomutt/mutt copy message-id with b4
- From: Maciej Wieczór-Retman <maciej.wieczor-retman@xxxxxxxxx>
- Re: Neomutt/mutt copy message-id with b4
- From: Greg KH <greg@xxxxxxxxx>
- Neomutt/mutt copy message-id with b4
- From: Maciej Wieczór-Retman <maciej.wieczor-retman@xxxxxxxxx>
- vfs_cache_pressure - time to reevaluate the defaults?
- From: Felix Howe <info@xxxxxxxxxx>
- Re: GPIO and interrupt
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- GPIO and interrupt
- From: Tony He <huangya90@xxxxxxxxx>
- NFS issue a network boot
- From: Hitesh Patidar <hitesh08patidar@xxxxxxxxx>
- Re: Linux Process Scheduling Algorithm
- From: Deepak Goel <deicool@xxxxxxxxx>
- Re: Linux Process Scheduling Algorithm
- From: Devendra aaru <devendra.aaru@xxxxxxxxx>
- Linux Process Scheduling Algorithm
- From: Deepak Goel <deicool@xxxxxxxxx>
- back at the naming bikeshed
- From: jim.cromie@xxxxxxxxx
- Re: kernel modules, derived work and GPLv2
- From: Ezra Buehler <ezra@xxxxxxxx>
- modules.builtin and /sys/modules
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- Re: kernel modules, derived work and GPLv2
- From: Greg KH <greg@xxxxxxxxx>
- kernel modules, derived work and GPLv2
- From: Phil Perry <phil@xxxxxxxxxx>
- Multipath Routing sends IP datagrams to a wrong next hop with hashing enabled
- From: Viacheslav Biriukov <v.v.biriukov@xxxxxxxxx>
- Re: Getting help in writing tty driver
- From: Greg KH <greg@xxxxxxxxx>
- Getting help in writing tty driver
- From: Ayush Singh <ayushdevel1325@xxxxxxxxx>
- Re: CONFLICT (content): Merge conflict in scripts/kconfig/Makefile
- From: jim.cromie@xxxxxxxxx
- About the name of 'struct list_head', how about giving an alias for differentiating the usage?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Kernel module for a network interface - remove trailer from sk_buff on reception
- From: Abhiram V <abhi.raa.man.v@xxxxxxxxx>
- Re: Kernel module for a network interface - remove trailer from sk_buff on reception
- From: Greg KH <greg@xxxxxxxxx>
- Re: Kernel module for a network interface - remove trailer from sk_buff on reception
- From: Alison Schofield <alison.schofield@xxxxxxxxx>
- Re: Kernel module for a network interface - remove trailer from sk_buff on reception
- From: Abhiram V <abhi.raa.man.v@xxxxxxxxx>
- Re: Kernel module for a network interface - remove trailer from sk_buff on reception
- From: Greg KH <greg@xxxxxxxxx>
- Kernel module for a network interface - remove trailer from sk_buff on reception
- From: Abhiram V <abhi.raa.man.v@xxxxxxxxx>
- CONFLICT (content): Merge conflict in scripts/kconfig/Makefile
- From: Mario Marietto <marietto2008@xxxxxxxxx>
- How is 'addr_space' filled in the pcie endpoint controller device tree node?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: PCie card information for ACPI and Device Tree systems
- From: Greg KH <greg@xxxxxxxxx>
- PCie card information for ACPI and Device Tree systems
- From: Lucas Tanure <tanure@xxxxxxxxx>
- Re: [jimc:dd-fix-2g] BUILD REGRESSION 664531695395972a1684dbc3604731db280b479e
- From: jim.cromie@xxxxxxxxx
- Re: Watching for new files/symlinks/devices in sysfs (possible? which syscall?)
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- Watching for new files/symlinks/devices in sysfs (possible? which syscall?)
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- Re: [jimc:dd-fix-2g] BUILD REGRESSION 664531695395972a1684dbc3604731db280b479e
- From: jim.cromie@xxxxxxxxx
- Better way to upstream a single-board computer?
- From: Lucas Tanure <tanure@xxxxxxxxx>
- RE: Running u-boot and linux on qemu arm64 virt machine, linux shell does not respond.. ==> solved!
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Missing Ubuntu tools on KernelBuild page
- From: Alan Perry <alanp@xxxxxxxxxxxxx>
- Missing Ubuntu tools on KernelBuild page
- From: Alan Perry <alanp@xxxxxxxxxxxxx>
- Re: eBPF Verifier's Design Principles
- From: Patrick ZHANG <patrickzhang2333@xxxxxxxxx>
- Running u-boot and linux on qemu arm64 virt machine, linux shell does not respond..
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: eBPF Verifier's Design Principles
- From: Andrea Tomassetti <andrea.tomassetti-opensource@xxxxxxxx>
- eBPF Verifier's Design Principles
- From: Patrick ZHANG <patrickzhang2333@xxxxxxxxx>
- Re: trouble running lkp-tests
- From: jim.cromie@xxxxxxxxx
- Re: Earlier Linux Code...
- From: Aruna Hewapathirane <aruna.hewapathirane@xxxxxxxxx>
- Re: Earlier Linux Code...
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Re: Need help determining if the change is warranted.
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Release of my Kernel Development Tool
- From: Lucas Tanure <tanure@xxxxxxxxx>
- Re: Need help determining if the change is warranted.
- From: Lucas Tanure <tanure@xxxxxxxxx>
- Re: Need help determining if the change is warranted.
- From: Alison Schofield <alison.schofield@xxxxxxxxx>
- Re: Earlier Linux Code...
- From: Deepak Goel <deicool@xxxxxxxxx>
- Re: Earlier Linux Code...
- From: arshad hussain <arshad.super@xxxxxxxxx>
- Re: Earlier Linux Code...
- From: Deepak Goel <deicool@xxxxxxxxx>
- Re: Earlier Linux Code...
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: Earlier Linux Code...
- From: Deepak Goel <deicool@xxxxxxxxx>
- Re: Earlier Linux Code...
- From: Deepak Goel <deicool@xxxxxxxxx>
- Re: Earlier Linux Code...
- From: Prathu Baronia <quic_pbaronia@xxxxxxxxxxx>
- Re: Earlier Linux Code...
- From: Alexander Kapshuk <alexander.kapshuk@xxxxxxxxx>
- Re: Earlier Linux Code...
- From: Deepak Goel <deicool@xxxxxxxxx>
- Re: Earlier Linux Code...
- From: Prathu Baronia <quic_pbaronia@xxxxxxxxxxx>
- Earlier Linux Code...
- From: Deepak Goel <deicool@xxxxxxxxx>
- When is a child socket created on a receiving side during a 3wh process, given syncookies are not used?
- From: Вадим Самохин <samokhinvadim@xxxxxxxxx>
- Re: trouble running lkp-tests
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- trouble running lkp-tests
- From: jim.cromie@xxxxxxxxx
- Re: Starting to learn Linux...
- From: Constantine Shulyupin <constantine.shulyupin@xxxxxxxxx>
- Re: Starting to learn Linux...
- From: Fernando Apesteguía <fernando.apesteguia@xxxxxxxxx>
- Re: Starting to learn Linux...
- From: Deepak Goel <deicool@xxxxxxxxx>
- Re: Starting to learn Linux...
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: Starting to learn Linux...
- From: Deepak Goel <deicool@xxxxxxxxx>
- Re: Starting to learn Linux...
- From: Greg KH <greg@xxxxxxxxx>
- Re: Starting to learn Linux...
- From: Deepak Goel <deicool@xxxxxxxxx>
- Re: API between modules
- From: Prathu Baronia <quic_pbaronia@xxxxxxxxxxx>
- Re: API between modules
- From: Greg KH <greg@xxxxxxxxx>
- API between modules
- From: Lucas Tanure <tanure@xxxxxxxxx>
- Re: Starting to learn Linux...
- From: Constantine Shulyupin <constantine.shulyupin@xxxxxxxxx>
- Re: Starting to learn Linux...
- From: Tom Mitchell <niftylinkern@xxxxxxxxxxxx>
- Re: Starting to learn Linux...
- From: Deepak Goel <deicool@xxxxxxxxx>
- Re: Build mainline driver for another Kernel Version
- From: Greg KH <greg@xxxxxxxxx>
- Re: Build mainline driver for another Kernel Version
- From: Lucas Tanure <tanure@xxxxxxxxx>
- Re: Build mainline driver for another Kernel Version
- From: Greg KH <greg@xxxxxxxxx>
- Build mainline driver for another Kernel Version
- From: Lucas Tanure <tanure@xxxxxxxxx>
- Re: Starting to learn Linux...
- From: Greg KH <greg@xxxxxxxxx>
- Re: Starting to learn Linux...
- From: Deepak Goel <deicool@xxxxxxxxx>
- Re: How to debug high sysload in 2,3 second
- From: Valentin Vidić <vvidic@xxxxxxxxxxxxxxxxxxxxxx>
- Re: Starting to learn Linux...
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Re: How to debug high sysload in 2,3 second
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Starting to learn Linux...
- From: Deepak Goel <deicool@xxxxxxxxx>
- How to debug high sysload in 2,3 second
- From: Naruto Nguyen <narutonguyen2018@xxxxxxxxx>
- Default value of transparent_hugepage/shmem_enabled
- From: Phil Jones <philj56@xxxxxxxxx>
- Race between flush_cache_page and flush_tlb_page
- From: Karim Manaouil <k.manaouil@xxxxxxxxx>
- Re: BUG: kernel NULL pointer dereference while copying sk_buff struct
- From: Abdul Matin <abdulmatincuetcse17@xxxxxxxxx>
- Re: BUG: kernel NULL pointer dereference while copying sk_buff struct
- From: Alexander Kapshuk <alexander.kapshuk@xxxxxxxxx>
- Re: BUG: kernel NULL pointer dereference while copying sk_buff struct
- From: Alexander Kapshuk <alexander.kapshuk@xxxxxxxxx>
- BUG: kernel NULL pointer dereference while copying sk_buff struct
- From: Abdul Matin <abdulmatincuetcse17@xxxxxxxxx>
- Re: spin_lock_irqsave first used and then unused
- From: Torin Carey <torin@xxxxxxxxx>
- Re: spin_lock_irqsave first used and then unused
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- spin_lock_irqsave first used and then unused
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Re: Organizing patches/build artifacts against multiple trees
- From: jim.cromie@xxxxxxxxx
- Re: Kernel developer proccess
- From: Valentin Vidić <vvidic@xxxxxxxxxxxxxxxxxxxxxx>
- Re: Kernel developer proccess
- From: Aruna Hewapathirane <aruna.hewapathirane@xxxxxxxxx>
- Re: Kernel developer proccess
- From: Denis Kirjanov <dkirjanov@xxxxxxx>
- Re: Kernel developer proccess
- From: jim.cromie@xxxxxxxxx
- Re: MAC resolution issue [Two ethernet ports on same subnet]
- From: Anton Danilov <littlesmilingcloud@xxxxxxxxx>
- Re: ALSA: arecord : silennce recorded as 0x80
- From: Luke Koch <lu.ale.koch@xxxxxxxxx>
- ALSA: arecord : silennce recorded as 0x80
- From: Muni Sekhar <munisekharrms@xxxxxxxxx>
- Re: Kernel Panic - V6.2 - Reseved memory issue
- From: Lucas Tanure <tanure@xxxxxxxxx>
- Re: Kernel Panic - V6.2 - Reseved memory issue
- From: Lucas Tanure <tanure@xxxxxxxxx>
- Kernel Panic - V6.2 - Reseved memory issue
- From: Lucas Tanure <tanure@xxxxxxxxx>
- Re: screening patch here before sending to devs
- From: Daniel Watson <ozzloy@xxxxxxxxx>
- Re: screening patch here before sending to devs
- From: Daniel Watson <ozzloy@xxxxxxxxx>
- Re: screening patch here before sending to devs
- From: Greg KH <greg@xxxxxxxxx>
- Re: screening patch here before sending to devs
- From: Daniel Watson <ozzloy@xxxxxxxxx>
- Re: screening patch here before sending to devs
- From: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
- screening patch here before sending to devs
- From: Daniel Watson <ozzloy@xxxxxxxxx>
- Need help determining if the change is warranted.
- From: Anton Gusev <aagusev@xxxxxxxxx>
- Kernel developer proccess
- From: Panagiotis Filippakopoulos <filippakpan@xxxxxxxxx>
- RE: returned dma address value of dma_alloc_coherent, is it always in the lower 4GB range?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: returned dma address value of dma_alloc_coherent, is it always in the lower 4GB range?
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- returned dma address value of dma_alloc_coherent, is it always in the lower 4GB range?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: MAC resolution issue [Two ethernet ports on same subnet]
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
- MAC resolution issue [Two ethernet ports on same subnet]
- From: Hitesh Patidar <hitesh08patidar@xxxxxxxxx>
- Meaning of Task in TODO file
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Organizing patches/build artifacts against multiple trees
- From: Sarah Langstrom <sarahklangstrom@xxxxxxxxx>
- RE: In device tree, can't understand 'ranges' property of PCIe root complex node
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Calculating private and shared memory for processes
- From: Jeffrey Walton <noloader@xxxxxxxxx>
- Calculating private and shared memory for processes
- From: "Rahul Gore (Nokia)" <rahul.gore@xxxxxxxxx>
- Calculating private and shared memory for processes
- From: "Rahul Gore (Nokia)" <rahul.gore@xxxxxxxxx>
- Use of "iommu-map-mask" for PCIe root complex device tree node, does it make actual requester ID ignored?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- In place THP promotions
- From: Pedro Gomes <pedrodemargomes@xxxxxxxxx>
- In device tree, can't understand 'ranges' property of PCIe root complex node
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Where can I find information on memremap behavior?
- From: Siddh Raman Pant <sanganaka@xxxxxxxx>
- Where can I find information on memremap behavior?
- From: Anton Gusev <aagusev@xxxxxxxxx>
- a question in pcie-designware-ep.c, can't find where a variable has been set.
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- uninterruptible process
- From: "Axel M." <axel.moittier@xxxxx>
- Guideline on Linux NAT feature
- From: Abdul Matin <abdulmatincuetcse17@xxxxxxxxx>
- Re: custom compil
- From: aurel.pere@xxxxxxxxx
- Re: custom compil
- From: Siddh Raman Pant <sanganaka@xxxxxxxx>
- Isolating abstract sockets
- From: Stefan Bavendiek <stefan.bavendiek@xxxxxxxxxxx>
- Re: custom compil
- From: aurel.pere@xxxxxxxxx
- Re: custom compil
- From: Siddh Raman Pant <sanganaka@xxxxxxxx>
- Re: custom compil
- From: aurel.pere@xxxxxxxxx
- Services / processes shutdown
- From: "Axel M." <axel.moittier@xxxxx>
- Re: Query on New LTS version
- From: Greg KH <greg@xxxxxxxxx>
- Query on New LTS version
- From: Arun Sudhilal <getarunks@xxxxxxxxx>
- Re: custom compil
- From: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@xxxxxxxxx>
- custom compil
- From: A.Péré <aurel.pere@xxxxxxxxx>
- Re: POSIX.1b book/documentation
- From: "Axel M." <axel.moittier@xxxxx>
- Re: POSIX.1b book/documentation
- From: Alexander Kapshuk <alexander.kapshuk@xxxxxxxxx>
- POSIX.1b book/documentation
- From: "Axel M." <axel.moittier@xxxxx>
- Re: linked list within a kernel probe
- From: chrishell <chris@xxxxxxxxxxxx>
- Re: linked list within a kernel probe
- From: chrishell <chris@xxxxxxxxxxxx>
- Re: linked list within a kernel probe
- From: Tom Mitchell <niftylinkern@xxxxxxxxxxxx>
- Re: linked list within a kernel probe
- From: "Billie Alsup (balsup)" <balsup@xxxxxxxxx>
- Re: linked list within a kernel probe
- From: chrishell <chris@xxxxxxxxxxxx>
- Re: Determining the reason for reserved RAM
- From: Mikhail Krylov <sqarert@xxxxxxxxx>
- Determining the reason for reserved RAM
- From: Mikhail Krylov <sqarert@xxxxxxxxx>
- linked list within a kernel probe
- From: chrishell <chris@xxxxxxxxxxxx>
- RE: How can I reserve contiguous mem alloc region?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- How can I reserve contiguous mem alloc region?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- RE: How is the size of init ram disk determined when initramfs is used?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: How is the size of init ram disk determined when initramfs is used?
- From: Nicholas Mc Guire <der.herr@xxxxxxx>
- Re: How is the size of init ram disk determined when initramfs is used?
- From: Bernd Petrovitsch <bernd@xxxxxxxxxxxxxxxxxxx>
- Re: How is the size of init ram disk determined when initramfs is used?
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- Meaning of 'no-map' in reserved-memory, and accessing a memory region from two OSes using physical adderss
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: 2 modules from 1 source ?
- From: jim.cromie@xxxxxxxxx
- Re: 2 modules from 1 source ?
- From: Greg KH <greg@xxxxxxxxx>
- Re: 2 modules from 1 source ?
- From: jim.cromie@xxxxxxxxx
- 2 modules from 1 source ?
- From: jim.cromie@xxxxxxxxx
- Re: large global static arrays
- From: Ani Sinha <ani@xxxxxxxxxxx>
- Re: large global static arrays
- From: Greg KH <greg@xxxxxxxxx>
- Re: large global static arrays
- From: Ani Sinha <ani@xxxxxxxxxxx>
- Re: large global static arrays
- From: Greg KH <greg@xxxxxxxxx>
- Re: large global static arrays
- From: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@xxxxxxxxx>
- large global static arrays
- From: Ani Sinha <ani@xxxxxxxxxxx>
- Re: unmap memory mapped with devm_ioremap_resource
- From: Constantine Shulyupin <constantine.shulyupin@xxxxxxxxx>
- Re: unmap memory mapped with devm_ioremap_resource
- From: Adrian Fiergolski <adrian.fiergolski@xxxxxxxxxxxxx>
- Re: unmap memory mapped with devm_ioremap_resource
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Re: unmap memory mapped with devm_ioremap_resource
- From: jim.cromie@xxxxxxxxx
- Re: unmap memory mapped with devm_ioremap_resource
- From: Adrian Fiergolski <adrian.fiergolski@xxxxxxxxxxxxx>
- Re: The method to alloc DMA ring buffer
- From: Tony He <huangya90@xxxxxxxxx>
- Re: The method to alloc DMA ring buffer
- From: Tom Mitchell <niftylinkern@xxxxxxxxxxxx>
- The method to alloc DMA ring buffer
- From: Tony He <huangya90@xxxxxxxxx>
- Re: unmap memory mapped with devm_ioremap_resource
- From: Adrian Fiergolski <adrian.fiergolski@xxxxxxxxxxxxx>
- Re: unable to find the virtual to physical mapping
- From: Arun chandran <arun.edarath@xxxxxxxxx>
- unable to find the virtual to physical mapping
- From: Arun chandran <arun.edarath@xxxxxxxxx>
- Re: unmap memory mapped with devm_ioremap_resource
- From: Constantine Shulyupin <constantine.shulyupin@xxxxxxxxx>
- unmap memory mapped with devm_ioremap_resource
- From: Adrian Fiergolski <adrian.fiergolski@xxxxxxxxxxxxx>
- Re: OBJTOOL Build error
- From: "'Greg KH'" <gregkh@xxxxxxxxxxxxxxxxxxx>
- RE: OBJTOOL Build error
- From: "John Aron" <john@xxxxxxxxxxxxx>
- Re: OBJTOOL Build error
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- RE: OBJTOOL Build error
- From: "John Aron" <john@xxxxxxxxxxxxx>
- Re: struct definition inside a function
- From: Greg KH <greg@xxxxxxxxx>
- struct definition inside a function
- From: Anuz Pratap Singh Tomar <chambilkethakur@xxxxxxxxx>
- gdb vmlinux scripting
- From: jim.cromie@xxxxxxxxx
- Re: OBJTOOL Build error
- From: Greg KH <greg@xxxxxxxxx>
- OBJTOOL Build error
- From: "John Aron" <john@xxxxxxxxxxxxx>
- Re: Working with kernel cifs, NFS
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- Working with kernel cifs, NFS
- From: Rabinarayan Panigrahi <rabi.kernel.2012@xxxxxxxxx>
- Re: What does OS do with the 'ranges' property in PCI RC node in the device tree?
- From: Saad Masood <saadahmed42@xxxxxxxxx>
- What does OS do with the 'ranges' property in PCI RC node in the device tree?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: question about boot_params global variables
- From: jim.cromie@xxxxxxxxx
- Re: "4.7.0 Too Many recipients." issue in git send-email
- From: Dongliang Mu <mudongliangabcd@xxxxxxxxx>
- Re: "4.7.0 Too Many recipients." issue in git send-email
- From: Konstantin Ryabitsev <konstantin@xxxxxxxxxxxxxxxxxxx>
- "4.7.0 Too Many recipients." issue in git send-email
- From: Dongliang Mu <mudongliangabcd@xxxxxxxxx>
- Re: question about boot_params global variables
- From: Saad Masood <saadahmed42@xxxxxxxxx>
- Re: question about boot_params global variables
- From: jim.cromie@xxxxxxxxx
- RE: clock_gettime function doesn't scale to real time.. and changing CNTFRQ_EL0 doesn't make any change..(arm64)
- From: Siddh Raman Pant <code@xxxxxxxx>
- RE: clock_gettime function doesn't scale to real time.. and changing CNTFRQ_EL0 doesn't make any change..(arm64)
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- RE: clock_gettime function doesn't scale to real time.. and changing CNTFRQ_EL0 doesn't make any change..(arm64)
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: REPOST : Kernel panic when try to install Rocky 8.4
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
- Re: REPOST : Kernel panic when try to install Rocky 8.4
- From: Siddh Raman Pant <code@xxxxxxxx>
- Re: REPOST : Kernel panic when try to install Rocky 8.4
- From: mavis <mavisgame@xxxxx>
- Re: REPOST : Kernel panic when try to install Rocky 8.4
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
- Re: REPOST : Kernel panic when try to install Rocky 8.4
- From: mavis <mavisgame@xxxxx>
- Re: REPOST : Kernel panic when try to install Rocky 8.4
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
- Re: REPOST : Kernel panic when try to install Rocky 8.4
- From: mavis <mavisgame@xxxxx>
- RE: clock_gettime function doesn't scale to real time.. and changing CNTFRQ_EL0 doesn't make any change..(arm64)
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: REPOST : Kernel panic when try to install Rocky 8.4
- From: Siddh Raman Pant <code@xxxxxxxx>
- Re: clock_gettime function doesn't scale to real time.. and changing CNTFRQ_EL0 doesn't make any change..(arm64)
- From: Siddh Raman Pant <code@xxxxxxxx>
- Re: clock_gettime function doesn't scale to real time.. and changing CNTFRQ_EL0 doesn't make any change..(arm64)
- From: Linus Probert <linus.probert@xxxxxxxxx>
- REPOST : Kernel panic when try to install Rocky 8.4
- From: mavis <mavisgame@xxxxx>
- clock_gettime function doesn't scale to real time.. and changing CNTFRQ_EL0 doesn't make any change..(arm64)
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: kernel compile message
- From: jim.cromie@xxxxxxxxx
- Re: kernel compile message
- From: Anatoly Pugachev <matorola@xxxxxxxxx>
- Re: kernel compile message
- From: Anatoly Pugachev <matorola@xxxxxxxxx>
- Re: kernel compile message
- From: Anatoly Pugachev <matorola@xxxxxxxxx>
- Re: kernel compile message
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
- Re: kernel compile message
- From: Random Guy <random.guy.from.russia@xxxxxxxxx>
- Re: kernel compile message
- From: Alexander Kapshuk <alexander.kapshuk@xxxxxxxxx>
- kernel compile message
- From: Anatoly Pugachev <matorola@xxxxxxxxx>
- Re: Source code organization
- From: "Billie Alsup (balsup)" <balsup@xxxxxxxxx>
- Re: Source code organization
- From: Greg KH <greg@xxxxxxxxx>
- Re: Source code organization
- From: "Billie Alsup (balsup)" <balsup@xxxxxxxxx>
- Re: Vendor driver vs Kernel, which one gets priority?
- From: Do Hak Yong <crazyraven@xxxxxxxxx>
- Re: Source code organization
- From: Greg KH <greg@xxxxxxxxx>
- Re: Vendor driver vs Kernel, which one gets priority?
- From: Bjørn Mork <bjorn@xxxxxxx>
- Vendor driver vs Kernel, which one gets priority?
- From: Do Hak Yong <crazyraven@xxxxxxxxx>
- Re: work one webcam out of two webcam connect to xhci controller for 2 usb3.0 ports
- From: Malatesh <malatesh10@xxxxxxxxx>
- Re: work one webcam out of two webcam connect to xhci controller for 2 usb3.0 ports
- From: jim.cromie@xxxxxxxxx
- Source code organization
- From: "Billie Alsup (balsup)" <balsup@xxxxxxxxx>
- Re: How to refer to a code snippet in email?
- From: Drake Talley <drake@xxxxxxxxxxxxxxx>
- olddefconfig vs. menuconfig (just open, save file and close)
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- Mutex midpath question (mutex-design.rst , CONFIG_MUTEX_SPIN_ON_OWNER)
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- Re: Faster, incremental depmod when adding modules?
- From: jim.cromie@xxxxxxxxx
- Re: work one webcam out of two webcam connect to xhci controller for 2 usb3.0 ports
- From: jim.cromie@xxxxxxxxx
- Re: mabe a bug in kernel 5.4 since patchlevel 159 - dma error because use ttynull?
- From: jim.cromie@xxxxxxxxx
- mabe a bug in kernel 5.4 since patchlevel 159 - dma error because use ttynull?
- From: Simon Lindhorst <s.lindhorst@xxxxxx>
- howto strip trailing newline from a format string at compile-time ?
- From: jim.cromie@xxxxxxxxx
- work one webcam out of two webcam connect to xhci controller for 2 usb3.0 ports
- From: Malatesh <malatesh10@xxxxxxxxx>
- Re: Can KASAN be used with loadable modules?
- From: John Ousterhout <john.ousterhout@xxxxxxxxx>
- Can KASAN be used with loadable modules?
- From: John Ousterhout <john.ousterhout@xxxxxxxxx>
- Re: only one element get stored in kfifo
- From: chrishell <chris@xxxxxxxxxxxx>
- only one element get stored in kfifo
- From: chrishell <chris@xxxxxxxxxxxx>
- Re: How to refer to a code snippet in email?
- From: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
- Re: How to refer to a code snippet in email?
- From: Greg KH <greg@xxxxxxxxx>
- How to refer to a code snippet in email?
- From: Drake Talley <drake@xxxxxxxxxxxxxxx>
- Re: Missing linux-headers
- From: neutrino network <neutrino.network1@xxxxxxxxx>
- Re: Missing linux-headers
- From: Jeffrey Walton <noloader@xxxxxxxxx>
- Re: Missing linux-headers
- From: "Scott J. Crouch" <scottjcrouch@xxxxxxxxx>
- Re: Missing linux-headers
- From: neutrino network <neutrino.network1@xxxxxxxxx>
- Re: Using printk, how can I know where the kernel jumps after schedule() function?
- From: "Fabio M. De Francesco" <fmdefrancesco@xxxxxxxxx>
- Can Cgroup memory subsystem provide estimated available memory, just like /proc/meminfo: MemAvailable?
- From: "=?gb18030?b?xP6+srXEzOy/1Q==?=" <497692757@xxxxxx>
- Re: Missing linux-headers
- From: "Scott J. Crouch" <scottjcrouch@xxxxxxxxx>
- Missing linux-headers
- From: neutrino network <neutrino.network1@xxxxxxxxx>
- Re: Extract patch from kernel mailing list
- From: neutrino network <neutrino.network1@xxxxxxxxx>
- How is the size of init ram disk determined when initramfs is used?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Extract patch from kernel mailing list
- From: Konstantin Ryabitsev <konstantin@xxxxxxxxxxxxxxxxxxx>
- Re: Extract patch from kernel mailing list
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- Extract patch from kernel mailing list
- From: neutrino network <neutrino.network1@xxxxxxxxx>
- Re: Abbreviation for variables
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Re: Abbreviation for variables
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Abbreviation for variables
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- RE: how to debug... program hangs while downing for write a rwsem (busybox shell hangs/stucks after boot, a case related to u-boot)
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- unable to detect ov5640 mipi module in Raspberry Pi
- From: subbu Subhash <lavudijannisubhash@xxxxxxxxx>
- Re: workqueue - queue + drain
- From: "Fabio M. De Francesco" <fmdefrancesco@xxxxxxxxx>
- Re: difference between DECLARE_* and DEFINE_* macro namespaces ?
- From: Rik van Riel <riel@xxxxxxxxxxx>
- RE: how to debug... program hangs while downing for write a rwsem
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- RE: how to debug... program hangs while downing for write a rwsem
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Where do I put my new driver?
- From: Greg KH <greg@xxxxxxxxx>
- Re: Where do I put my new driver?
- From: jim.cromie@xxxxxxxxx
- difference between DECLARE_* and DEFINE_* macro namespaces ?
- From: jim.cromie@xxxxxxxxx
- Re: how to debug... program hangs while downing for write a rwsem
- From: Greg KH <greg@xxxxxxxxx>
- how to debug... program hangs while downing for write a rwsem
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Kernelnewbies Digest, Vol 142, Issue 6
- From: Patrick Jattke <kerneln00bs@xxxxxxxxx>
- Re: Get personal support for your first kernel patch
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Get personal support for your first kernel patch
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Fwd: What is the right thing to do if a patch got ignored?
- From: "Sv. Jason M. Christos the First" <thekernelnewbie@xxxxxxxxx>
- Re: How to find hook points for USB device additions and removals
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- How to program a cpu local APIC timer to issue interrupt
- From: Rohit Chourasia <chourasiarohit27@xxxxxxxxx>
- mail server issues fixed?
- From: Rik van Riel <riel@xxxxxxxxxxx>
- Using printk, how can I know where the kernel jumps after schedule() function?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- How to find hook points for USB device additions and removals
- From: Yang Hanlin <mattoncis@xxxxxxxxxxx>
- Faster, incremental depmod when adding modules?
- From: Ian Pilcher <arequipeno@xxxxxxxxx>
- Re: Misunderstanding documentation on enabling cgroup controllers
- From: Valentin Vidić <vvidic@xxxxxxxxxxxxxxxxxxxxxx>
- RE: busybox shell doesn't come up or get stuck.. where should I look or how should I debug it?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Misunderstanding documentation on enabling cgroup controllers
- From: Nicky Chorley <ndchorley@xxxxxxxxx>
- RE: busybox shell doesn't come up or get stuck.. where should I look or how should I debug it?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- RE: busybox shell doesn't come up or get stuck.. where should I look or how should I debug it?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: question about boot_params global variables
- From: Valentin Vidić <vvidic@xxxxxxxxxxxxxxxxxxxxxx>
- question about boot_params global variables
- From: shiyu chou <shiyu2010310@xxxxxxxxx>
- Re: How to resubmit patches in the right way after review fixes?
- From: Greg KH <greg@xxxxxxxxx>
- Re: Why can't I remove a cgroup?
- From: Nicky Chorley <ndchorley@xxxxxxxxx>
- How to resubmit patches in the right way after review fixes?
- From: Adverg Ebashinskii <ebashinskii@xxxxxxxxx>
- busybox shell doesn't come up or get stuck.. where should I look or how should I debug it?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- workqueue - queue + drain
- From: Martin Kaiser <lists@xxxxxxxxx>
- Re: Why can't I remove a cgroup?
- From: Jack Wang <xjtuwjp@xxxxxxxxx>
- Re: Why can't I remove a cgroup?
- From: Valentin Vidić <vvidic@xxxxxxxxxxxxxxxxxxxxxx>
- Why can't I remove a cgroup?
- From: Nicky Chorley <ndchorley@xxxxxxxxx>
- Where do I put my new driver?
- From: Alec Matthews <me@xxxxxxxxxxxxxxxx>
- Re: gpiod_get() - How to get GPIO from chip & offset?
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: gpiod_get() - How to get GPIO from chip & offset?
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: What is the right thing to do if a patch got ignored?
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Re: What is the right thing to do if a patch got ignored?
- From: Greg KH <greg@xxxxxxxxx>
- What is the right thing to do if a patch got ignored?
- From: Adverg Ebashinskii <ebashinskii@xxxxxxxxx>
- gpiod_get() - How to get GPIO from chip & offset?
- From: Ian Pilcher <arequipeno@xxxxxxxxx>
- Re: git magic or usage wisdom.
- From: jim.cromie@xxxxxxxxx
- Re: pipe writes, ERESTARTSYS and SA_RESTART
- From: Viacheslav Biriukov <v.v.biriukov@xxxxxxxxx>
- Re: git magic or usage wisdom.
- From: Ismael Luceno <ismael@xxxxxxxxxxx>
- git magic or usage wisdom.
- From: jim.cromie@xxxxxxxxx
- Re: pipe writes, ERESTARTSYS and SA_RESTART
- From: Yann Droneaud <ydroneaud@xxxxxxxxxx>
- pipe writes, ERESTARTSYS and SA_RESTART
- From: Viacheslav Biriukov <v.v.biriukov@xxxxxxxxx>
- vt6655 implementation of cfg80211 subsystem
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Re: Kernelnewbies Digest, Vol 141, Issue 1
- From: Francisco Arevalo del Rio <farevalod@xxxxxxxxx>
- Compile Kernel with -g3 option to have additional debug information
- From: Adverg Ebashinskii <ebashinskii@xxxxxxxxx>
- Re: Is arch/x86/boot/main.c main obsolete?
- From: jim.cromie@xxxxxxxxx
- RE: Confused about how to apply add-symbol-file in gdb
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Confused about how to apply add-symbol-file in gdb
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Failed to set gdb breakpoint at 0x10200 while debugging Linux 5.18.10 with qemu_system_x86_64
- From: 吴腾 <wutengaa@xxxxxxxxx>
- Re: Can I debug busybox program running on a qemu virtual machine using gdb?
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- Re: What is considered a real name?
- From: Konstantin Ryabitsev <konstantin@xxxxxxxxxxxxxxxxxxx>
- Re: Can I debug busybox program running on a qemu virtual machine using gdb?
- From: Tom Mitchell <niftylinkern@xxxxxxxxxxxx>
- Re: Can I debug busybox program running on a qemu virtual machine using gdb?
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- RE: Can I debug busybox program running on a qemu virtual machine using gdb?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Can I debug busybox program running on a qemu virtual machine using gdb?
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- What is considered a real name?
- From: "R. Valentim Feitoza da Silva" <valentimfeitoza@xxxxxxxxxxx>
- Can I debug busybox program running on a qemu virtual machine using gdb?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: pr_info in driver question
- From: Denis Kirjanov <dkirjanov@xxxxxxx>
- Re: pr_info in driver question
- From: Denis Kirjanov <dkirjanov@xxxxxxx>
- pr_info in driver question
- From: A mp <ampklabs@xxxxxxxxx>
- Re: What to do when your patch gets ignored
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Re: What to do when your patch gets ignored
- From: Andrea Tomassetti <andrea.tomassetti-opensource@xxxxxxxx>
- RE: A question about memblock.reserved
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Is arch/x86/boot/main.c main obsolete?
- From: ebashinskii <ebashinskii@xxxxxxxxx>
- Re: Is arch/x86/boot/main.c main obsolete?
- From: Aruna Hewapathirane <aruna.hewapathirane@xxxxxxxxx>
- Is arch/x86/boot/main.c main obsolete?
- From: ebashinskii <ebashinskii@xxxxxxxxx>
- Re: A question about memblock.reserved
- From: Wonhyuk Yang <vvghjk1234@xxxxxxxxx>
- A question about memblock.reserved
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Workaround to send patch with git send email and gmail account
- From: Konstantin Ryabitsev <konstantin@xxxxxxxxxxxxxxxxxxx>
- Re: Workaround to send patch with git send email and gmail account
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Workaround to send patch with git send email and gmail account
- From: Jules Irenge <jbi.octave@xxxxxxxxx>
- Re: When reviewers stop responding
- From: Greg KH <greg@xxxxxxxxx>
- Re: When reviewers stop responding
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Confusion about x86 page table PUD entries and pud_xxx helpers
- From: Marco Bonelli <marco@xxxxxxxxxx>
- Re: What to do when your patch gets ignored
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Re: What to do when your patch gets ignored
- From: Greg KH <greg@xxxxxxxxx>
- Re: What to do when your patch gets ignored
- From: Andrea Tomassetti <andrea.tomassetti@xxxxxxxx>
- Re: What to do when your patch gets ignored
- From: Richard <richard_siegfried@xxxxxxxxxxxx>
- Re: request for feedback before sending this patch
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- What to do when your patch gets ignored
- From: Andrea Tomassetti <andrea.tomassetti@xxxxxxxx>
- Re: When reviewers stop responding
- From: Greg KH <greg@xxxxxxxxx>
- Re: When reviewers stop responding
- From: Ian Pilcher <arequipeno@xxxxxxxxx>
- Re: request for feedback before sending this patch
- From: ozzloy <ozzloy@xxxxxxxxx>
- Re: request for feedback before sending this patch
- From: Greg KH <greg@xxxxxxxxx>
- request for feedback before sending this patch
- From: ozzloy <ozzloy@xxxxxxxxx>
- precautions
- From: Kernel Newbie <thekernelnewbie@xxxxxxxxx>
- Re: driver 88XX.au fails to compile on kernel 5.18.0 ppa Ubuntu
- From: Greg KH <greg@xxxxxxxxx>
- driver 88XX.au fails to compile on kernel 5.18.0 ppa Ubuntu
- From: Jose Luis Alarcon Sanchez <jlalarcon@xxxxxxxxxxxxxxx>
- Sponsor me
- From: Kernel Newbie <thekernelnewbie@xxxxxxxxx>
- Re: Possibility of merge of disable icotl TIOCSTI patch
- From: Yann Droneaud <ydroneaud@xxxxxxxxxx>
- Re: Kconfig rules (depends, imply)
- From: Muni Sekhar <munisekharrms@xxxxxxxxx>
- Re: Kconfig rules (depends, imply)
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
- Kconfig rules (depends, imply)
- From: Muni Sekhar <munisekharrms@xxxxxxxxx>
- How to remove kernel message log "random: get_random_u32 called from allocate_slab"?
- From: Dongliang Mu <mudongliangabcd@xxxxxxxxx>
- Re: Supporting a USB HID device interface that is missing a interrupt input endpoint
- From: Greg KH <greg@xxxxxxxxx>
- Re: Supporting a USB HID device interface that is missing a interrupt input endpoint
- From: Matt Silva <msilva-dev@xxxxxxxxxxxxxx>
- Re: Hacking the schedutil governor to upshift to maximum clock rate at every process dispatch.
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Hacking the schedutil governor to upshift to maximum clock rate at every process dispatch.
- From: David Kra <dakra137@xxxxxxxxx>
- How is rid (requester ID) is used in SMMU-v3 connected to PCIe RC?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Possibility of merge of disable icotl TIOCSTI patch
- From: Simon Brand <simon.brand@xxxxxxxxxxxxxxxx>
- small device nodes in syscon, simple-mfd node in device tree
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- RE: when is pci_dev->resource values are filled?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- when is pci_dev->resource values are filled?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: How to track the source tree of kernel
- From: Fox Chen <foxhlchen@xxxxxxxxx>
- Re: How to track the source tree of kernel
- From: 陈 明政 <chen.mingzheng@xxxxxxxxxxx>
- Re: Supporting a USB HID device interface that is missing a interrupt input endpoint
- From: Greg KH <greg@xxxxxxxxx>
- Re: Supporting a USB HID device interface that is missing a interrupt input endpoint
- From: Matt Silva <msilva-dev@xxxxxxxxxxxxxx>
- Re: How to track the source tree of kernel
- From: Greg KH <greg@xxxxxxxxx>
- How to track the source tree of kernel
- From: "chen.mingzheng" <chen.mingzheng@xxxxxxxxxxx>
- Re: Supporting a USB HID device interface that is missing a interrupt input endpoint
- From: Greg KH <greg@xxxxxxxxx>
- Supporting a USB HID device interface that is missing a interrupt input endpoint
- From: Matt Silva <msilva-dev@xxxxxxxxxxxxxx>
- Re: A question about linux pipes
- From: Aruna Hewapathirane <aruna.hewapathirane@xxxxxxxxx>
- Re: UAPI syscall exception interpretation
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Re: UAPI syscall exception interpretation
- From: Muhammad Ali <m.ali023@xxxxxxxxxxx>
- A question about linux pipes
- From: xhighway999 <xhighway999@xxxxxxxxxxxxxx>
- Re: UAPI syscall exception interpretation
- From: Greg KH <greg@xxxxxxxxx>
- Mapping ram memory using ioremap
- From: noman pouigt <variksla@xxxxxxxxx>
- Re: UAPI syscall exception interpretation
- From: Muhammad Ali <m.ali023@xxxxxxxxxxx>
- Re: UAPI syscall exception interpretation
- From: Greg KH <greg@xxxxxxxxx>
- UAPI syscall exception interpretation
- From: Muhammad Ali <M.ALI023@xxxxxxxxxxx>
- Re: Beginner's guide to writing a SATA device driver?
- From: Ozgur Karatas <ozgurk@xxxxxxxx>
- Re: Beginner's guide to writing a SATA device driver?
- From: Ozgur Karatas <ozgurk@xxxxxxxx>
- Beginner's guide to writing a SATA device driver?
- From: "Gabriel L. Somlo" <gsomlo@xxxxxxxxx>
- How is 'ranges' property of pci node of a device tree determined?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- A question about iommu, passing to the device user data containing pointers
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Why do we need READ_ONCE() in list_empty()?
- From: Valentin Vidić <vvidic@xxxxxxxxxxxxxxxxxxxxxx>
- Why do we need READ_ONCE() in list_empty()?
- From: Karim Manaouil <k.manaouil@xxxxxxxxx>
- Re: Linux kernel environment setup in VSCode
- From: Kwanghoon Son <k.son@xxxxxxxxxxx>
- Re: smp_processor_id used in preemptable context ?
- From: Vincent Ray <vray@xxxxxxxxxxxxx>
- Re: smp_processor_id used in preemptable context ?
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Device mapper does not find dev in list
- From: Leon Gross <leon.gross@xxxxxx>
- smp_processor_id used in preemptable context ?
- From: Vincent Ray <vray@xxxxxxxxxxxxx>
- rcu / rcu_bh and ddos
- From: Vincent Ray <vray@xxxxxxxxxxxxx>
- RE: Backtrace stopped: previous frame identical to this frame (corrupt stack?) , even with fresh qemu and linux build
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- RE: Backtrace stopped: previous frame identical to this frame (corrupt stack?) , even with fresh qemu and linux build
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- RE: Backtrace stopped: previous frame identical to this frame (corrupt stack?) , even with fresh qemu and linux build
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Replace two ioread32 with ioread64_lo_hi non_atomic
- From: Ozgur Karatas <ozgurk@xxxxxxxx>
- Re: Replace two ioread32 with ioread64_lo_hi non_atomic
- From: Abu Rasheda <rcpilot2010@xxxxxxxxx>
- Replace two ioread32 with ioread64_lo_hi non_atomic
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Re: A blog for kernel development
- From: Amit Kumar <free.amit.kumar@xxxxxxxxx>
- RE: Backtrace stopped: previous frame identical to this frame (corrupt stack?) , even with fresh qemu and linux build
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Coding style operator precedence
- From: Solomon Tan <wjsota@xxxxxxxxx>
- Re: Coding style operator precedence
- From: Greg KH <greg@xxxxxxxxx>
- Re: Backtrace stopped: previous frame identical to this frame (corrupt stack?) , even with fresh qemu and linux build
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
- Coding style operator precedence
- From: Solomon Tan <wjsota@xxxxxxxxx>
- Backtrace stopped: previous frame identical to this frame (corrupt stack?) , even with fresh qemu and linux build
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Slowing down task using a modified FIFO scheduler
- From: J Mårtensson <martensson.jacob@xxxxxxxxx>
- Re: [ARM64] Trap and Forward CPU_ON psci smc
- From: Ozgur Karatas <ozgurk@xxxxxxxx>
- Re: [ARM64] Trap and Forward CPU_ON psci smc
- From: Ozgur Karatas <ozgurk@xxxxxxxx>
- [ARM64] Trap and Forward CPU_ON psci smc
- From: Mushahid Hussain <mushi.shar@xxxxxxxxx>
- Re: System does not start with kernel from staging-testing pulled 3hours ago
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Re: System does not start with kernel from staging-testing pulled 3hours ago
- From: Ozgur Karatas <ozgurk@xxxxxxxx>
- Re: System does not start with kernel from staging-testing pulled 3hours ago
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Re: System does not start with kernel from staging-testing pulled 3hours ago
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Re: System does not start with kernel from staging-testing pulled 3hours ago
- From: Ozgur Karatas <ozgurk@xxxxxxxx>
- System does not start with kernel from staging-testing pulled 3hours ago
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Re: Linux kernel environment setup in VSCode
- From: Pavel Skripkin <paskripkin@xxxxxxxxx>
- Re: How to write to a PCIe config space during kernel boot up
- From: "Khalid F. Sabzwari" <kfsabzwari@xxxxxxxxx>
- Re: How to write to a PCIe config space during kernel boot up
- From: Ozgur Karatas <ozgurk@xxxxxxxx>
- Re: How to write to a PCIe config space during kernel boot up
- From: Greg KH <greg@xxxxxxxxx>
- Re: How to write to a PCIe config space during kernel boot up
- From: "Khalid F. Sabzwari" <kfsabzwari@xxxxxxxxx>
- Re: How to write to a PCIe config space during kernel boot up
- From: Ozgur Karatas <ozgurk@xxxxxxxx>
- How to write to a PCIe config space during kernel boot up
- From: "Khalid F. Sabzwari" <kfsabzwari@xxxxxxxxx>
- Re: Can't understand /proc/interrupts output for GICv3 case
- From: "'Greg KH'" <greg@xxxxxxxxx>
- Re: Can't understand /proc/interrupts output for GICv3 case
- From: Ozgur Karatas <ozgurk@xxxxxxxx>
- RE: Can't understand /proc/interrupts output for GICv3 case
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Can't understand /proc/interrupts output for GICv3 case
- From: Ozgur Karatas <ozgurk@xxxxxxxx>
- RE: Can't understand /proc/interrupts output for GICv3 case
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- RE: Can't understand /proc/interrupts output for GICv3 case
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Can't understand /proc/interrupts output for GICv3 case
- From: "'Greg KH'" <greg@xxxxxxxxx>
- RE: Can't understand /proc/interrupts output for GICv3 case
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- RE: Can't understand /proc/interrupts output for GICv3 case
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Can't understand /proc/interrupts output for GICv3 case
- From: Ozgur Karatas <ozgurk@xxxxxxxx>
- Re: Can't understand /proc/interrupts output for GICv3 case
- From: Peter Maydell <peter.maydell@xxxxxxxxxx>
- Re: Can't understand /proc/interrupts output for GICv3 case
- From: Ozgur Karatas <ozgurk@xxxxxxxx>
- Re: Can't understand /proc/interrupts output for GICv3 case
- From: Greg KH <greg@xxxxxxxxx>
- Re: Can't understand /proc/interrupts output for GICv3 case
- From: Peter Maydell <peter.maydell@xxxxxxxxxx>
- Re: Can't understand /proc/interrupts output for GICv3 case
- From: "'Greg KH'" <greg@xxxxxxxxx>
- RE: Can't understand /proc/interrupts output for GICv3 case
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Can't understand /proc/interrupts output for GICv3 case
- From: "'Greg KH'" <greg@xxxxxxxxx>
- Re: Can't understand /proc/interrupts output for GICv3 case
- From: Ozgur Kara <ozgur@xxxxxxxxxx>
- RE: Can't understand /proc/interrupts output for GICv3 case
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- RE: Can't understand /proc/interrupts output for GICv3 case
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Can't understand /proc/interrupts output for GICv3 case
- From: Ozgur Kara <ozgur@xxxxxxxxxx>
- Re: Can't understand /proc/interrupts output for GICv3 case
- From: Greg KH <greg@xxxxxxxxx>
- RE: Can't understand /proc/interrupts output for GICv3 case
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Can't understand /proc/interrupts output for GICv3 case
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Linux kernel environment setup in VSCode
- From: Minh Dang <minhdang1990@xxxxxxxxx>
- Linux kernel environment setup in VSCode
- From: Jasper Surmont <surmontjasper@xxxxxxxxx>
- RE: irq_desc not found for my interrupt number during request_irq (radix tree of irq_desc has only 64 entries..)
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- irq_desc not found for my interrupt number during request_irq (radix tree of irq_desc has only 64 entries..)
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- RE: How can I debug kernel module running on a virtual machine?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- How can I debug kernel module running on a virtual machine?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- RE: request_irq not working.. what else should I do?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- request_irq not working.. what else should I do?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Rescheduling Interrupt
- From: H C <hc128168@xxxxxxxxx>
- Re: "tftp: sendto: Network is unreachable" during tftp on a virtual machine. What config should I add to kernel build?
- From: Grant Taylor <gtaylor@xxxxxxxxxxxxxxxxxx>
- "tftp: sendto: Network is unreachable" during tftp on a virtual machine. What config should I add to kernel build?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: kernel space: finding cpu usage of individual process/thread
- From: Greg KH <greg@xxxxxxxxx>
- Re: arm64 code looking for variable rodata_enabled when STRICT_KERNEL_RWX = n
- From: Pavel Skripkin <paskripkin@xxxxxxxxx>
- kernel space: finding cpu usage of individual process/thread
- From: Pintu Agarwal <pintu.ping@xxxxxxxxx>
- RE: arm64 code looking for variable rodata_enabled when STRICT_KERNEL_RWX = n
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- RE: arm64 code looking for variable rodata_enabled when STRICT_KERNEL_RWX = n
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: arm64 code looking for variable rodata_enabled when STRICT_KERNEL_RWX = n
- From: FMDF <fmdefrancesco@xxxxxxxxx>
- Re: What to do with macros with do while (0) body
- From: Greg KH <greg@xxxxxxxxx>
- What to do with macros with do while (0) body
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- RE: Which Page table is appled when MMU is turned on in boot process of ARM64
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Which Page table is appled when MMU is turned on in boot process of ARM64
- From: JeongHwan Kim <frog007.kernel.kr@xxxxxxxxx>
- arm64 code looking for variable rodata_enabled when STRICT_KERNEL_RWX = n
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- RE: Which Page table is appled when MMU is turned on in boot process of ARM64
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Which Page table is appled when MMU is turned on in boot process of ARM64
- From: JeongHwan Kim <frog007.kernel.kr@xxxxxxxxx>
- Re: ioctl number change / backwards compatibility doubt
- From: Greg KH <greg@xxxxxxxxx>
- RE: arm64 cache policy setting
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- [PATCH] dogs -
- From: Jim Cromie <jim.cromie@xxxxxxxxx>
- arm64 cache policy setting
- From: JeongHwan Kim <frog007.kernel.kr@xxxxxxxxx>
- S25HS512T SPI Flash support in Linux Kernel 4.9.X
- From: Mithran B <mithranb22@xxxxxxxxx>
- How to understand sched_period in the cfs schedule class?
- From: Song Zhi <hizhisong@xxxxxxxxxxx>
- Re: "Disappearing" file in Documentation/ABI/testing
- From: Ozgur Kara <ozgur@xxxxxxxxxx>
- Re: "Disappearing" file in Documentation/ABI/testing
- From: Ozgur Kara <ozgur@xxxxxxxxxx>
- Re: "Disappearing" file in Documentation/ABI/testing
- From: Greg KH <greg@xxxxxxxxx>
- "Disappearing" file in Documentation/ABI/testing
- From: Ian Pilcher <arequipeno@xxxxxxxxx>
- Re: ioctl number change / backwards compatibility doubt
- From: Rogério Valentim Feitoza da Silva <rogerio.silva3920@xxxxxxxxx>
- Re: ioctl number change / backwards compatibility doubt
- From: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@xxxxxxxxx>
- Re: Does Linux (Torvald's tree) infringe GPLv2 and contain proprietary binary blobs?
- From: Robert Joslyn <robert.joslyn@xxxxxxxxxxxxxxxx>
- Re: A blog for kernel development
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: Does Linux (Torvald's tree) infringe GPLv2 and contain proprietary binary blobs?
- From: Konstantin Ryabitsev <konstantin@xxxxxxxxxxxxxxxxxxx>
- Re: Does Linux (Torvald's tree) infringe GPLv2 and contain proprietary binary blobs?
- From: FMDF <fmdefrancesco@xxxxxxxxx>
- Does Linux (Torvald's tree) infringe GPLv2 and contain proprietary binary blobs?
- From: FMDF <fmdefrancesco@xxxxxxxxx>
- Re: A blog for kernel development
- From: FMDF <fmdefrancesco@xxxxxxxxx>
- Re: A blog for kernel development
- From: Amit Kumar <free.amit.kumar@xxxxxxxxx>
- Re: A blog for kernel development
- From: John A <john@xxxxxxxxxxxxx>
- Re: A blog for kernel development
- From: Amit Kumar <free.amit.kumar@xxxxxxxxx>
- Re: A blog for kernel development
- From: Torin Carey <torin@xxxxxxxxx>
- Re: A blog for kernel development
- From: Amit Kumar <free.amit.kumar@xxxxxxxxx>
- Re: A blog for kernel development
- From: Amit Kumar <free.amit.kumar@xxxxxxxxx>
- Re: A blog for kernel development
- From: Ozgur Kara <ozgur@xxxxxxxxxx>
- Re: A blog for kernel development
- From: Amit Kumar <free.amit.kumar@xxxxxxxxx>
- Re: *** Compiler is too old
- From: Aruna Hewapathirane <aruna.hewapathirane@xxxxxxxxx>
- Re: *** Compiler is too old
- From: jim.cromie@xxxxxxxxx
- Re: USB CDC performance test
- From: Mithran B <mithranb22@xxxxxxxxx>
- Re: *** Compiler is too old
- From: Rogério Valentim Feitoza da Silva <rogerio.silva3920@xxxxxxxxx>
- Re: USB CDC performance test
- From: Greg KH <greg@xxxxxxxxx>
- Re: USB CDC performance test
- From: Mithran B <mithranb22@xxxxxxxxx>
- Re: *** Compiler is too old
- From: jim.cromie@xxxxxxxxx
- Re: A blog for kernel development
- From: Amit Kumar <free.amit.kumar@xxxxxxxxx>
- Re: A blog for kernel development
- From: Thomas Piekarski <t.piekarski@xxxxxxxxxxxxxx>
- Re: Which vger list is for linux-firmware?
- From: Ozgur Kara <ozgur@xxxxxxxxxx>
- Which vger list is for linux-firmware?
- From: Jeffrey Walton <noloader@xxxxxxxxx>
- A blog for kernel development
- From: Amit Kumar <free.amit.kumar@xxxxxxxxx>
- Re: USB CDC performance test
- From: Jeffrey Walton <noloader@xxxxxxxxx>
- Re: USB CDC performance test
- From: Greg KH <greg@xxxxxxxxx>
- Re: USB CDC performance test
- From: Mithran B <mithranb22@xxxxxxxxx>
- Re: USB CDC performance test
- From: Greg KH <greg@xxxxxxxxx>
- Re: Exporting cpu instruction set to kernel .config file
- From: Torin Carey <torin@xxxxxxxxx>
- USB CDC performance test
- From: Mithran B <mithranb22@xxxxxxxxx>
- Does fixmap pages for fdt require 4MB memory?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Questions about data protection in the kernel
- From: Kai Meyer <kai.meyer@xxxxxxxxxxxx>
- Re: Exporting cpu instruction set to kernel .config file
- From: Rogério Valentim Feitoza da Silva <rogerio.silva3920@xxxxxxxxx>
- Re: Exporting cpu instruction set to kernel .config file
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Re: Exporting cpu instruction set to kernel .config file
- From: FMDF <fmdefrancesco@xxxxxxxxx>
- Fwd: Exporting cpu instruction set to kernel .config file
- From: FMDF <fmdefrancesco@xxxxxxxxx>
- Re: Exporting cpu instruction set to kernel .config file
- From: FMDF <fmdefrancesco@xxxxxxxxx>
- Re: How to compile source code of new kernel specifically for my pc hardware with uefi secure boot.
- From: Guddla Rupesh <rupeshforu3@xxxxxxxxx>
- Re: Event Tracing in the Linux kernel
- From: Donald Hunter <donald@xxxxxxxxxxxx>
- Re: Exporting cpu instruction set to kernel .config file
- From: Guddla Rupesh <rupeshforu3@xxxxxxxxx>
- RE: weird printk operation early at start_kernel..
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Exporting cpu instruction set to kernel .config file
- From: FMDF <fmdefrancesco@xxxxxxxxx>
- Re: Exporting cpu instruction set to kernel .config file
- From: FMDF <fmdefrancesco@xxxxxxxxx>
- Re: How to compile source code of new kernel specifically for my pc hardware with uefi secure boot.
- From: Greg KH <greg@xxxxxxxxx>
- Re: Exporting cpu instruction set to kernel .config file
- From: Torin Carey <torin@xxxxxxxxx>
- Exporting cpu instruction set to kernel .config file
- From: Guddla Rupesh <rupeshforu3@xxxxxxxxx>
- Re: How to compile source code of new kernel specifically for my pc hardware with uefi secure boot.
- From: Guddla Rupesh <rupeshforu3@xxxxxxxxx>
- Re: Event Tracing in the Linux kernel
- From: David Kahurani <k.kahurani@xxxxxxxxx>
- Re: Event Tracing in the Linux kernel
- From: David Kahurani <k.kahurani@xxxxxxxxx>
- Re: Event Tracing in the Linux kernel
- From: Constantine Shulyupin <constantine.shulyupin@xxxxxxxxx>
- Event Tracing in the Linux kernel
- From: David Kahurani <k.kahurani@xxxxxxxxx>
- Re: Safe registration of procfs entries in LKM
- From: Torin Carey <torin@xxxxxxxxx>
- Re: How to compile source code of new kernel specifically for my pc hardware with uefi secure boot.
- From: Guddla Rupesh <rupeshforu3@xxxxxxxxx>
- Re: How to compile source code of new kernel specifically for my pc hardware with uefi secure boot.
- From: Greg KH <greg@xxxxxxxxx>
- How to compile source code of new kernel specifically for my pc hardware with uefi secure boot.
- From: Guddla Rupesh <rupeshforu3@xxxxxxxxx>
- macro arg reuse warnings, howto fix ?
- From: jim.cromie@xxxxxxxxx
- Re: How do I start contributing to the Linux kernel?
- From: Ozgur Kara <ozgur@xxxxxxxxxx>
- Re: How do I start contributing to the Linux kernel?
- From: Sebastian Fricke <sebastian.fricke@xxxxxxxxxx>
- Re: How do I start contributing to the Linux kernel?
- From: Ozgur Kara <ozgur@xxxxxxxxxx>
- Re: How do I start contributing to the Linux kernel?
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Safe registration of procfs entries in LKM
- From: Torin Carey <torin@xxxxxxxxx>
- Re: make menuconfig and make j$(nproc) throwing errors
- From: Constantine Shulyupin <constantine.shulyupin@xxxxxxxxx>
- Re: make menuconfig and make j$(nproc) throwing errors
- From: Aruna Hewapathirane <aruna.hewapathirane@xxxxxxxxx>
- Re: make menuconfig and make j$(nproc) throwing errors
- From: Greg KH <greg@xxxxxxxxx>
- Re: make menuconfig and make j$(nproc) throwing errors
- From: Aruna Hewapathirane <aruna.hewapathirane@xxxxxxxxx>
- Re: make menuconfig and make j$(nproc) throwing errors
- From: Greg KH <greg@xxxxxxxxx>
- Re: How do I start contributing to the Linux kernel?
- From: Sebastian Fricke <sebastian.fricke.linux@xxxxxxxxx>
- make menuconfig and make j$(nproc) throwing errors
- From: Aruna Hewapathirane <aruna.hewapathirane@xxxxxxxxx>
- How do I start contributing to the Linux kernel?
- From: Rogério Valentim Feitoza da Silva <rogerio.silva3920@xxxxxxxxx>
- Re: Are there any requirements to sign up for Kernel Newbies?
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Are there any requirements to sign up for Kernel Newbies?
- From: Rogério Valentim Feitoza da Silva <rogerio.silva3920@xxxxxxxxx>
- Re: *** Compiler is too old
- From: Aruna Hewapathirane <aruna.hewapathirane@xxxxxxxxx>
- Re: *** Compiler is too old
- From: Aruna Hewapathirane <aruna.hewapathirane@xxxxxxxxx>
- Re: *** Compiler is too old
- From: Aruna Hewapathirane <aruna.hewapathirane@xxxxxxxxx>
- Re: *** Compiler is too old
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Re: *** Compiler is too old
- From: FMDF <fmdefrancesco@xxxxxxxxx>
- *** Compiler is too old
- From: Aruna Hewapathirane <aruna.hewapathirane@xxxxxxxxx>
- Re: Why doesn't the GCC give any warning to these unused variables in the Linux kernel?
- From: Greg KH <greg@xxxxxxxxx>
- Why doesn't the GCC give any warning to these unused variables in the Linux kernel?
- From: Song Zhi <hizhisong@xxxxxxxxxxx>
- About RISC-V syscalls and the __ARCH_WANT_TIME32_SYSCALLS macro
- From: Yimin Gu <ustcymgu@xxxxxxxxx>
- weird printk operation early at start_kernel..
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: Need good starting point
- From: Ankit Pandey <itsankitkp@xxxxxxxxx>
- Re: Need good starting point
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Re: Need good starting point
- From: Ankit Pandey <itsankitkp@xxxxxxxxx>
- Re: Need good starting point
- From: Rohan Puri <rohan.puri15@xxxxxxxxx>
- Need good starting point
- From: Ankit Pandey <itsankitkp@xxxxxxxxx>
- Re: Fwd: Need guidance regarding fixing styleguide error in rtl871x_pwrctrl.h
- From: Jeffrey Walton <noloader@xxxxxxxxx>
- Re: Fwd: Need guidance regarding fixing styleguide error in rtl871x_pwrctrl.h
- From: Ankit Pandey <itsankitkp@xxxxxxxxx>
- Re: Fwd: Need guidance regarding fixing styleguide error in rtl871x_pwrctrl.h
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Re: Need guidance regarding fixing styleguide error in rtl871x_pwrctrl.h
- From: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
- Fwd: Need guidance regarding fixing styleguide error in rtl871x_pwrctrl.h
- From: Ankit Pandey <itsankitkp@xxxxxxxxx>
- Re: Kernel freezes instead of panicking
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Can't find vprintk_safe in System.map
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- vmcore-dmesg : Missing the log_buf symbol
- From: David Kahurani <k.kahurani@xxxxxxxxx>
- Re: Kernel freezes instead of panicking
- From: David Kahurani <k.kahurani@xxxxxxxxx>
- Re: Kernel freezes instead of panicking
- From: Wonhyuk Yang <vvghjk1234@xxxxxxxxx>
- Re: Kernel freezes instead of panicking
- From: David Kahurani <k.kahurani@xxxxxxxxx>
- Kernel freezes instead of panicking
- From: David Kahurani <k.kahurani@xxxxxxxxx>
- Re: How to debug stuck read?
- From: Dāvis Mosāns <davispuh@xxxxxxxxx>
- Re: How to debug stuck read?
- From: Matthew Wilcox <willy@xxxxxxxxxxxxx>
- Re: How to debug stuck read?
- From: Dāvis Mosāns <davispuh@xxxxxxxxx>
- Re: How to debug stuck read?
- From: Matthew Wilcox <willy@xxxxxxxxxxxxx>
- Re: How to debug stuck read?
- From: Dāvis Mosāns <davispuh@xxxxxxxxx>
- Re: How to debug stuck read?
- From: FMDF <fmdefrancesco@xxxxxxxxx>
- Re: How to debug stuck read?
- From: Matthew Wilcox <willy@xxxxxxxxxxxxx>
- RE: RFQ of FPGA PCB with assembly
- From: "Andy. Yu" <bobojijixiao@xxxxxxx>
- Re: How to debug stuck read?
- From: Matthew Wilcox <willy@xxxxxxxxxxxxx>
- Re: How to debug stuck read?
- From: FMDF <fmdefrancesco@xxxxxxxxx>
- Re: Trying to understand oom-killer (output)
- From: Valentin Vidić <vvidic@xxxxxxxxxxxxxxxxxxxxxx>
- Re: Linux driver of vt6656 from staging area causes system to freeze.
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Trying to understand oom-killer (output)
- From: Sasa Vilic <sasavilic@xxxxxxxxx>
- Re: Linux driver of vt6656 from staging area causes system to freeze.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Linux driver of vt6656 from staging area causes system to freeze.
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Re: How to debug stuck read?
- From: Dāvis Mosāns <davispuh@xxxxxxxxx>
- How to debug stuck read?
- From: Dāvis Mosāns <davispuh@xxxxxxxxx>
- Core dump does not contain the section ".reg"
- From: William Tambe <tambewilliam@xxxxxxxxx>
- Re: First Time Contributor: Looking for Good Beginner issues
- From: "Fabio M. De Francesco" <fmdefrancesco@xxxxxxxxx>
- First Time Contributor: Looking for Good Beginner issues
- From: Dhruva gole <goledhruva@xxxxxxxxx>
- EISA always probes
- From: Bram Stolk <b.stolk@xxxxxxxxx>
- Re: ioctl number change / backwards compatibility doubt
- From: Greg KH <greg@xxxxxxxxx>
- Re: ioctl number change / backwards compatibility doubt
- From: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@xxxxxxxxx>
- RE: adding GCC optimze O0 to early_fixmap_init causes compiler error (BUILD_BUG failed)
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: adding GCC optimze O0 to early_fixmap_init causes compiler error (BUILD_BUG failed)
- From: jim.cromie@xxxxxxxxx
- RE: how to fix section mismatch warning after inserting #pragma GCC optimize ?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- RE: adding GCC optimze O0 to early_fixmap_init causes compiler error (BUILD_BUG failed)
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- adding GCC optimze O0 to early_fixmap_init causes compiler error (BUILD_BUG failed)
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: how to fix section mismatch warning after inserting #pragma GCC optimize ?
- From: Greg KH <greg@xxxxxxxxx>
- Re: ioctl number change / backwards compatibility doubt
- From: Greg KH <greg@xxxxxxxxx>
- how to fix section mismatch warning after inserting #pragma GCC optimize ?
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: ioctl number change / backwards compatibility doubt
- From: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@xxxxxxxxx>
- Re: About the kernel configuration(CONFIG_CPU_FREQ and CONFIG_CPU_IDLE.)
- From: jim.cromie@xxxxxxxxx
- Re: How to Convert Legacy Kernel Modules for modern Kernels
- From: Tianrui Wei <tianrui@xxxxxxxxxxxxxx>
- Re: How to Convert Legacy Kernel Modules for modern Kernels
- From: Greg KH <greg@xxxxxxxxx>
- Re: How to Convert Legacy Kernel Modules for modern Kernels
- From: Tianrui Wei <tianrui@xxxxxxxxxxxxxx>
- Re: How to Convert Legacy Kernel Modules for modern Kernels
- From: Greg KH <greg@xxxxxxxxx>
- How to Convert Legacy Kernel Modules for modern Kernels
- From: Tianrui Wei <tianrui@xxxxxxxxxxxxxx>
- RE: error: impossible constraint in 'asm' when compiling kernel code with -O0 option
- From: "Chan Kim" <ckim@xxxxxxxxxx>
- Re: About the kernel configuration(CONFIG_CPU_FREQ and CONFIG_CPU_IDLE.)
- From: 孙世龙 sunshilong <sunshilong369@xxxxxxxxx>
- About the kernel configuration(CONFIG_CPU_FREQ and CONFIG_CPU_IDLE.)
- From: 孙世龙 sunshilong <sunshilong369@xxxxxxxxx>
- Re: ioctl number change / backwards compatibility doubt
- From: Greg KH <greg@xxxxxxxxx>
- ioctl number change / backwards compatibility doubt
- From: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@xxxxxxxxx>
- Re: Where to find the information how to write a state of the art USB driver?
- From: Pavel Skripkin <paskripkin@xxxxxxxxx>
- RE: How to disable address randomization ?
- From: admin LI <admin@xxxxxxxxxxxxx>
- Re: How to disable address randomization ?
- From: admin LI <admin@xxxxxxxxxxxxx>
- Re: How to disable address randomization ?
- From: admin LI <admin@xxxxxxxxxxxxx>
[Index of Archives]
[Newbies FAQ]
[Linux Kernel Mentors]
[Linux Kernel Development]
[IETF Annouce]
[Git]
[Networking]
[Security]
[Bugtraq]
[Yosemite]
[MIPS Linux]
[ARM Linux]
[Linux RAID]
[Linux SCSI]
[Linux ACPI]