Re: kernel compile message

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Oct 30, 2022 at 3:33 AM Mulyadi Santosa
<mulyadi.santosa@xxxxxxxxx> wrote:
> On Tue, Oct 25, 2022, 16:29 Anatoly Pugachev <matorola@xxxxxxxxx> wrote:
>>
>> Hello!
>>
>> Doing kernel testing, occasionally I started to get messages:
>>
>> mator@ttip:~/linux-2.6$ make -j olddefconfig; nice make -j20 && nice
>> make -j20 modules
>> #
>> # configuration written to .config
>> #
>>   SYNC    include/config/auto.conf.cmd
>> make[1]: /bin/sh: Bad address
>>   UPD     include/generated/compile.h
>>   UPD     include/config/kernel.release
>>   UPD     include/generated/utsrelease.h
>>
>>
>> It is not always "bad address" is shown, next time i run "make
>> olddefconfig" it does not shows, but sometimes it shows... How do i
>> debug this ?
>
>
> Sounds like bad RAM to me

is a VM... and if it would be "bad ram" there would be random program
segfaults and kernel OOPS all around...
But thanks anyway, going to use "V=1"

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@xxxxxxxxxxxxxxxxx
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies



[Index of Archives]     [Newbies FAQ]     [Linux Kernel Mentors]     [Linux Kernel Development]     [IETF Annouce]     [Git]     [Networking]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux SCSI]     [Linux ACPI]

  Powered by Linux