[also Cc: devicetree and ARM folks] On Thu, Sep 07, 2023 at 08:21:44AM +0530, Raul Piper wrote: > Hello , > I am trying to detect an i2c device A on i2c1 line on one of the Arm > Cortex A7 platform but not able to see any device on a given address ( > 0x3d) . > > Is there any parameters of i2c which i can change like rise/fall time > , timeout etc in a device tree or kernel source and re test it? > I have tried changing the i2c speed from 100KHz to 400 KHz but no success. > I have even tried removing the 1.5K pull ups on the i2c lines but no result. > > So I wanted to know on what factors i2cdetect may not probe the device > or show it on the hex dump. > What parameters of i2c driver i can tinker and where? Is Platform dts > is the only file i can modify and test with? > Kernel is 5.51 . Do you mean v5.15.y stable series? > There are other 2-3 devices on the same lines which responds to > i2cdetect with correct address but not this device (0x3D) . > Its i2c address is also different from the current devices. > Specifically, what device do you have this issue with? Confused... -- An old man doll... just what I always wanted! - Clara
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
