LM Sensors

• Thread Index

• Re: [PATCH] sensors-detect: Nuvoton chip updates
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Patch and Upstart file for healthd.sh
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] sensors-detect: Nuvoton chip updates
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2] ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: Fancontrol memory consumption
  • From: Taz <rastataz@xxxxxxxxx>
• Re: Fancontrol memory consumption
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: Fancontrol memory consumption
  • From: Taz <rastataz@xxxxxxxxx>
• Re: Fancontrol memory consumption
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: Fancontrol memory consumption
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [RFC PATCH] hwmon: (it87) Add support for IT8620E
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: (gpio-fan) allow to use alarm support alone from DT
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Patch and Upstart file for healthd.sh
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: Fancontrol memory consumption
  • From: Taz <rastataz@xxxxxxxxx>
• Re: Fancontrol memory consumption
  • From: Taz <rastataz@xxxxxxxxx>
• Re: Fancontrol memory consumption
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: Patch and Upstart file for healthd.sh
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] hwmon: (nct7904) Strenghten detect function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (nct7904) Strenghten detect function
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH] sensors-detect: Nuvoton chip updates
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (nct7904) Strenghten detect function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (nct7904) Strenghten detect function
  • From: "Vadim V. Vlasov" <vvlasov@xxxxxxxxxxxxx>
• [PATCH] hwmon: (nct7904) Strenghten detect function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4] Add Nuvoton NCT7904 hwmon driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4] Add Nuvoton NCT7904 hwmon driver
  • From: "Vadim V. Vlasov" <vvlasov@xxxxxxxxxxxxx>
• Patch and Upstart file for healthd.sh
  • From: vbooh <vbooh@xxxxxxxxxx>
• [GIT PULL] hwmon fixes for v4.0-rc2
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3] Add Nuvoton NCT7904 hwmon driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3] Add Nuvoton NCT7904 hwmon driver
  • From: "Vadim V. Vlasov" <vvlasov@xxxxxxxxxxxxx>
• Re: [PATCH] Add Nuvoton NCT7904 hwmon driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] Add Nuvoton NCT7904 hwmon driver
  • From: "Vadim V. Vlasov" <vvlasov@xxxxxxxxxxxxx>
• Re: [PATCH] Add Nuvoton NCT7904 hwmon driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] Add Nuvoton NCT7904 hwmon driver
  • From: "Vadim V. Vlasov" <vvlasov@xxxxxxxxxxxxx>
• Re: [PATCH v6 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH v6 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v6 5/6] hwmon: pwm-fan: Read PWM FAN configuration from device tree
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v6 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v6 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v6 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v6 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v6 2/6] ARM: dts: Add pwm-fan node to the Odroid-U3 board
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v6 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH v2 5/5] hwmon: (it87) No need to skip fan4 for IT8603
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2 2/5] hwmon: (it87) Add feature flags for fans count and 16-bit fan configuration
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2 1/5] hwmon: (it87) Don't configure 16 bit fan counters it not necessary
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v5 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v5 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v5 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH 1/4] kernel.h: add find_closest() macro
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v5 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v5 5/6] hwmon: pwm-fan: Read PWM FAN configuration from device tree
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v5 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v5 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v5 2/6] ARM: dts: Add pwm-fan node to the Odroid-U3 board
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v5 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v5 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v2] ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2
  • From: Simon Guinot <simon.guinot@xxxxxxxxxxxx>
• [PATCH v2] hwmon: (gpio-fan) allow to use alarm support alone from DT
  • From: Simon Guinot <simon.guinot@xxxxxxxxxxxx>
• Re: [RFC PATCH 1/3] powerpc/powernv: Check OPAL sensor calls exist
  • From: Cedric Le Goater <clg@xxxxxxxxxx>
• [PATCH v2 4/5] hwmon: (it87) Add support for IT8786E
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 5/5] hwmon: (it87) No need to skip fan4 for IT8603
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 2/5] hwmon: (it87) Add feature flags for fans count and 16-bit fan configuration
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 3/5] hwmon: (it87) Add feature flag for VID support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 1/5] hwmon: (it87) Don't configure 16 bit fan counters it not necessary
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) allow to use alarm support alone from DT
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) allow to use alarm support alone from DT
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2
  • From: Simon Guinot <simon.guinot@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) allow to use alarm support alone from DT
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) allow to use alarm support alone from DT
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH] ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) allow to use alarm support alone from DT
  • From: Simon Guinot <simon.guinot@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) allow to use alarm support alone from DT
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH] ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2
  • From: Simon Guinot <simon.guinot@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) allow to use alarm support alone from DT
  • From: Simon Guinot <simon.guinot@xxxxxxxxxxxx>
• Re: [PATCH 1/4] kernel.h: add find_closest() macro
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH] sensors-detect: Detect additional IDT temperature sensors
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: Test with Chip IT8620E on a Gigabyte GA-H97M-HD3 version 2
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH] sensors-detect: Detect additional IDT temperature sensors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (jc42) Add support for additional IDT temperature sensors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (jc42) Add support for additional IDT temperature sensors
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v4 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v4 2/8] thermal: Provide stub for thermal_cdev_update() function
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v4 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [RESEND PATCH 3/4] hwmon: (lm85) replace x_TO_REG() functions with find_closest()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/4] kernel.h: add find_closest() macro
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/4] kernel.h: add find_closest() macro
  • From: Phil Pokorny <ppokorny@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2] (gpio-fan): Add thermal control hooks
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH V2] (gpio-fan): Add thermal control hooks
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH V2] (gpio-fan): Add thermal control hooks
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V2] (gpio-fan): Add thermal control hooks
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: IT8620E/IT8623E vs. IT8603E
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Asrock Q87 / Nuvoton NCT6681D support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (jc42) Add support for additional IDT temperature sensors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] Add Nuvoton NCT7904 hwmon driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Asrock Q87 / Nuvoton NCT6681D support
  • From: Servesh Muralidharan <servesh@xxxxxxxx>
• [RESEND PATCH 3/4] hwmon: (lm85) replace x_TO_REG() functions with find_closest()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [RESEND PATCH 4/4] hwmon: (w83795) use find_closest_desc() in pwm_freq_to_reg()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [RESEND PATCH 2/4] hwmon: (ina2xx) replace ina226_avg_bits() with find_closest()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [RESEND PATCH 1/4] kernel.h: add find_closest() macro
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [RESEND PATCH 0/4] find_closest() macro
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 3/4] hwmon: (lm85) replace XXX_TO_REG() functions with find_closest()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 4/4] hwmon: (w83795) use find_closest_desc() in pwm_freq_to_reg()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 0/4] find_closest() macro
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 1/4] kernel.h: add find_closest() macro
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 2/4] hwmon: (ina2xx) replace ina226_avg_bits() with find_closest()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: Test with Chip IT8620E on a Gigabyte GA-H97M-HD3 version 2
  • From: cedric <cedric321@xxxxxxxxxx>
• Re: Test with Chip IT8620E on a Gigabyte GA-H97M-HD3 version 2
  • From: cedric <cedric321@xxxxxxxxxx>
• Re: Test with Chip IT8620E on a Gigabyte GA-H97M-HD3 version 2
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Nuvoton NCT6681D support
  • From: Servesh Muralidharan <servesh@xxxxxxxx>
• Re: ITE 8620E Support
  • From: Jay Foster <jayf0ster@xxxxxxxxxxxxxx>
• [PATCH] Add Nuvoton NCT7904 hwmon driver
  • From: "Vadim V. Vlasov" <vvlasov@xxxxxxxxxxxxx>
• Re: Test with Chip IT8620E on a Gigabyte GA-H97M-HD3 version 2
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: Test with Chip IT8620E on a Gigabyte GA-H97M-HD3 version 2
  • From: cedric <cedric321@xxxxxxxxxx>
• Re: [PATCH 2/4] hwmon: (it87) Add feature flags for fans count and 16-bit fan configuration
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Test with Chip IT8620E on a Gigabyte GA-H97M-HD3 version 2
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: ITE 8620E Support
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: IT8620E working with it87 driver
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: IT8620E working with it87 driver
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: IT8620E/IT8623E vs. IT8603E
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 4/4] hwmon: (it87) Add support for IT8786E
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 3/4] hwmon: (it87) Add feature flag for VID support
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 2/4] hwmon: (it87) Add feature flags for fans count and 16-bit fan configuration
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/4] hwmon: (it87) Add support for IT8781F
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [RFC PATCH 1/3] powerpc/powernv: Check OPAL sensor calls exist
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH] hwmon: (jc42) Add support for additional IDT temperature sensors
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v4 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH v4 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH v4 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) allow to use alarm support alone from DT
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2
  • From: Simon Guinot <simon.guinot@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) allow to use alarm support alone from DT
  • From: Simon Guinot <simon.guinot@xxxxxxxxxxxx>
• Re: [PATCH] ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) allow to use alarm support alone from DT
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) allow to use alarm support alone from DT
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH] ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2
  • From: Simon Guinot <simon.guinot@xxxxxxxxxxxx>
• [PATCH] hwmon: (gpio-fan) allow to use alarm support alone from DT
  • From: Simon Guinot <simon.guinot@xxxxxxxxxxxx>
• Re: [RFC PATCH 0/3] hwmon: (ibmpowernv) add DTS support
  • From: Cedric Le Goater <clg@xxxxxxxxxx>
• Re: i8k: move driver from char to hwmon
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: i8k: move driver from char to hwmon
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: i8k: move driver from char to hwmon
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: i8k: move driver from char to hwmon
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: i8k: move driver from char to hwmon
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• i8k: move driver from char to hwmon
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: i8k: move driver from char to hwmon
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Address Port chip IT8620E
  • From: Phil Pokorny <ppokorny@xxxxxxxxxxxxxxxxxxxx>
• Address Port chip IT8620E
  • From: cedric <cedric321@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] hwmon: (ibmpowernv) add DTS support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH 0/3] hwmon: (ibmpowernv) add DTS support
  • From: Cedric Le Goater <clg@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] hwmon: (ibmpowernv) add DTS support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH 1/3] powerpc/powernv: Check OPAL sensor calls exist
  • From: Cedric Le Goater <clg@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] hwmon: (ibmpowernv) add DTS support
  • From: Cedric Le Goater <clg@xxxxxxxxxx>
• [RFC PATCH 0/3] hwmon: (ibmpowernv) add DTS support
  • From: Cédric Le Goater <clg@xxxxxxxxxx>
• [RFC PATCH 3/3] hwmon: (ibmpowernv) add DTS support
  • From: Cédric Le Goater <clg@xxxxxxxxxx>
• [RFC PATCH 1/3] powerpc/powernv: Check OPAL sensor calls exist
  • From: Cédric Le Goater <clg@xxxxxxxxxx>
• [RFC PATCH 2/3] powerpc/powernv: handle OPAL_SUCCESS return in opal_sensor_read
  • From: Cédric Le Goater <clg@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] hwmon: (ibmpowernv) add DTS support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH 1/3] powerpc/powernv: Check OPAL sensor calls exist
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v4 0/8] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v4 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH v4 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board
  • From: Andreas Färber <afaerber@xxxxxxx>
• [PATCH v4 8/8] hwmon: pwm-fan: Code for using PWM FAN as a cooling device
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v4 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v4 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v4 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v4 2/8] thermal: Provide stub for thermal_cdev_update() function
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: hwmon strangeness, no fan control on w83627dhg
  • From: Pavel Machek <pavel@xxxxxx>
• Re: hwmon strangeness, no fan control on w83627dhg
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: hwmon strangeness, no fan control on w83627dhg
  • From: Pavel Machek <pavel@xxxxxx>
• Sensors-Unity: GTK UI for Ubuntu
  • From: Pavel Rojtberg <mail@xxxxxxxxxxxx>
• sensors.conf for Gigabyte GA-H97N Wifi
  • From: Pavel Rojtberg <mail@xxxxxxxxxxxx>
• [PATCH 3/3] hwmon: (nct6775) Enable auxiliary fan monitoring on ASRock Z77 Pro4-M
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/3] hwmon: (nct6775) Restore hardware monitoring logical device status on resume
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/3] hwmon: (nct6775) Convert to use SIMPLE_DEV_PM_OPS
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/4] hwmon: (it87) Add support for IT8781F
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 4/4] hwmon: (it87) Add support for IT8786E
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 3/4] hwmon: (it87) Add feature flag for VID support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/4] hwmon: (it87) Add feature flags for fans count and 16-bit fan configuration
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: hwmon strangeness, no fan control on w83627dhg
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/3] hwmon: (applesmc) Allow format checking
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/3] hwmon: (coretemp) Allow format checking
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] hwmon: (ibmpex) Allow format string checking
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (jc42) Add support for additional IDT temperature sensors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/3] hwmon: (applesmc) Allow format checking
  • From: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] hwmon: (coretemp) Allow format checking
  • From: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] hwmon: (ibmpex) Allow format string checking
  • From: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
• Test with Chip IT8620E on a Gigabyte GA-H97M-HD3 version 2
  • From: cedric <cedric321@xxxxxxxxxx>
• Test with Chip IT8620E on a Gigabyte GA-H97M-HD3
  • From: cedric <cedric321@xxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Check return value of devm_regmap_init_i2c
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (ads7828) Check return value of devm_regmap_init_i2c
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• Re: [PATCH v3 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree
  • From: Lukasz Majewski <l.majewski@xxxxxxxxx>
• Re: [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle
  • From: Lukasz Majewski <l.majewski@xxxxxxxxx>
• [GIT PULL] hwmon updates for 3.20
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: NCT6776 on ASRock Z77 Pro4-M
  • From: eaut <eaut@xxxxxxxxx>
• Re: [PATCH v3 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v3 8/8] hwmon: pwm-fan: Code for using PWM FAN as a cooling device
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v3 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v3 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v3 2/8] thermal: Provide stub for thermal_cdev_update() function
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v3 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v3 0/8] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v3 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: NCT6776 on ASRock Z77 Pro4-M
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: NCT6776 on ASRock Z77 Pro4-M
  • From: eaut <eaut@xxxxxxxxx>
• Re: NCT6776 on ASRock Z77 Pro4-M
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• NCT6776 on ASRock Z77 Pro4-M
  • From: eaut <eaut@xxxxxxxxx>
• [PATCH hwmon] hwmon: tmp102_dev_pm_ops can be static
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• [hwmon:hwmon-next 19/19] drivers/hwmon/tmp102.c:284:1: sparse: symbol 'tmp102_dev_pm_ops' was not declared. Should it be static?
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• Re: [PATCH v2] hwmon: tmp102: add hibernation callbacks
  • From: Grygorii Strashko <grygorii.strashko@xxxxxxxxxx>
• Re: [PATCH v2] hwmon: tmp102: add hibernation callbacks
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] hwmon: tmp102: add hibernation callbacks
  • From: <grygorii.strashko@xxxxxxxxxx>
• Re: [PATCH] hwmon: tmp102: add hibernation callbacks
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: tmp102: add hibernation callbacks
  • From: <grygorii.strashko@xxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Robert Rosengren <robert.rosengren@xxxxxxxx>
• [PATCH v2 1/2] ads2828: Convert to use regmap
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 2/2] hwmon: (ads2828) Only keep data in device data structure if needed
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Robert Rosengren <robert.rosengren@xxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Robert Rosengren <robert.rosengren@xxxxxxxx>
• Making the pwmcontrol UI a little easier, and delays
  • From: darxus@xxxxxxxxxxxxxxx
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Robert Rosengren <robert.rosengren@xxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Robert Rosengren <robert.rosengren@xxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Robert Rosengren <robert.rosengren@xxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Robert Rosengren <robert.rosengren@xxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [GIT PULL] hwmon updates for Linux 3.19
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] hwmon: (jc42) Allow negative hysteresis temperatures
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (jc42) Allow negative hysteresis temperatures
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] hwmon: (jc42) Fix integer overflow when writing hysteresis value
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/2] hwmon: (jc42) Use sign_extend32 for sign extension
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 2/2] hwmon: (jc42) Fix integer overflow
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] sensors-detect: Add detection of IT8786E
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/2] drivers/hwmon/ad7314.c: Do proper sign extension
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/2] drivers/hwmon/adc128d818.c: Do proper sign extension
  • From: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] drivers/hwmon/ad7314.c: Do proper sign extension
  • From: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] sensors-detect: Add detection of IT8731F and IT8732F
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] sensors-detect: Add detection of IT8780F
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 2/2] drivers/hwmon/adc128d818.c: Do proper sign extension
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: abx500: fix format string warnings
  • From: Asaf Vertz <asaf.vertz@xxxxxxxxxxx>
• Re: [PATCH] hwmon: abx500: fix format string warnings
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (jc42) Fix integer overflow when writing hysteresis value
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Robert Rosengren <robert.rosengren@xxxxxxxx>
• Py-smbus for Python 3
  • From: Michael Mercier <michael.mercier@xxxxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Selection Committee 2015
  • From: "Fredric Taylor" <cmesidor@xxxxxxxxxxxxxx>
• [PATCH 2/2] hwmon: (jc42) Fix integer overflow
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/2] hwmon: (jc42) Use sign_extend32 for sign extension
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] sensors-detect: Add detection of IT8731F and IT8732F
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] sensors-detect: Add detection of IT8780F
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] sensors-detect: Add detection of IT8786E
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 1/2] ads2828: Convert to use regmap
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 2/2] hwmon: (ads2828) Only keep data in device data structure if needed
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/2] hwmon: (ads2828) Only keep data in device data structure if needed
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/2] ads2828: Convert to use regmap
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (ads7828) Make sample interval configurable
  • From: Robert Rosengren <robert.rosengren@xxxxxxxx>
• Re: [PATCH v2] hwmon: (ina2xx) Add ina231 compatible string
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device
  • From: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH v2 2/8] thermal: Provide stub for thermal_cdev_update() function
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH v2 2/8] thermal: Provide stub for thermal_cdev_update() function
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH v2] hwmon: (ina2xx) Add ina231 compatible string
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] hwmon: (ina2xx) Add ina231 compatible string
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] hwmon: (ina2xx) Add ina231 compatible string
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [notifications@xxxxxxxxxx: [it87] Support for ITE8786 (#2)]
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ina2xx) Add ina231 compatible string
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (ina2xx) Add ina231 compatible string
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: X10SLM-F with SMBus
  • From: Patrik Dufresne <ikus060@xxxxxxxxx>
• Re: X10SLM-F with SMBus
  • From: Patrik Dufresne <ikus060@xxxxxxxxx>
• randconfig build error with next-20150112, in drivers/hwmon/gpio-fan.c
  • From: Jim Davis <jim.epost@xxxxxxxxx>
• Re: randconfig build error with next-20150112, in drivers/hwmon/gpio-fan.c
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: hwmon strangeness, no fan control on w83627dhg
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 0/2] hwmon: (ina2xx) code clean-up and minor fixes
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/2] hwmon: (ina2xx) use DIV_ROUND_CLOSEST() to avoid rounding errors
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 0/2] hwmon: (ina2xx) code clean-up and minor fixes
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 1/2] hwmon: (ina2xx) remove an unnecessary dev_get_drvdata() result check
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: X10SLM-F with SMBus
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: hwmon strangeness, no fan control on w83627dhg
  • From: Pavel Machek <pavel@xxxxxx>
• Re: hwmon strangeness, no fan control on w83627dhg
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: X10SLM-F with SMBus
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: X10SLM-F with SMBus
  • From: Patrik Dufresne <ikus060@xxxxxxxxx>
• Re: [PATCHv3] hwmon: (ina2xx) implement update_interval attribute for ina226
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: X10SLM-F with SMBus
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• X10SLM-F with SMBus
  • From: Patrik Dufresne <ikus060@xxxxxxxxx>
• Re: [PATCHv2] hwmon: (ina2xx) implement update_interval attribute for ina226
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCHv3] hwmon: (ina2xx) implement update_interval attribute for ina226
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCHv2] hwmon: (ina2xx) implement update_interval attribute for ina226
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCHv2] hwmon: (ina2xx) implement update_interval attribute for ina226
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCHv2] hwmon: (ina2xx) implement update_interval attribute for ina226
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH V2] (gpio-fan): Add thermal control hooks
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH V2] (gpio-fan): Add thermal control hooks
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ina2xx) implement update_interval attribute for ina226
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: hwmon strangeness, no fan control on w83627dhg
  • From: Pavel Machek <pavel@xxxxxx>
• Re: hwmon strangeness, no fan control on w83627dhg
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: hwmon strangeness, no fan control on w83627dhg
  • From: Pavel Machek <pavel@xxxxxx>
• Re: hwmon strangeness, no fan control on w83627dhg
  • From: David Hubbard <david.c.hubbard@xxxxxxxxx>
• hwmon strangeness, no fan control on w83627dhg
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] hwmon: (ina2xx) implement update_interval attribute for ina226
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH V2] (gpio-fan): Add thermal control hooks
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] hwmon: (ina2xx) implement update_interval attribute for ina226
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (ina2xx) implement update_interval attribute for ina226
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH] (gpio-fan): Add thermal control hooks
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] (gpio-fan): Add thermal control hooks
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] hwmon: ina2xx: allow to change the averaging rate at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: ina2xx: allow to change the averaging rate at run-time
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: ina2xx: allow to change the averaging rate at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: ina2xx: allow to change the averaging rate at run-time
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [v8, 5/5] hwmon: ina2xx: allow to change the averaging rate at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH] hwmon: ina2xx: allow to change the averaging rate at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v8 0/5] hwmon: ina2xx: implement chip reinitialization and add new attributes
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [v8, 5/5] hwmon: ina2xx: allow to change the averaging rate at run-time
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: hwmon: nct7802: Constify struct regmap_config
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v8 5/5] hwmon: ina2xx: allow to change the averaging rate at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v8 4/5] hwmon: ina2xx: make shunt resistance configurable at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v8 3/5] hwmon: ina2xx: don't accept shunt values greater than the calibration factor
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v8 1/5] hwmon: ina2xx: reinitialize the chip in case it's been reset
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v8 2/5] hwmon: ina2xx: remove a stray new line
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v8 0/5] hwmon: ina2xx: implement chip reinitialization and add new attributes
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device
  • From: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
• [PATCH] hwmon: nct7802: Constify struct regmap_config
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v2 5/8] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v2 3/8] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v2 2/8] thermal: Provide stub for thermal_cdev_update() function
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH v2 6/8] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty cycle
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 7/8] hwmon: thermal: Read PWM FAN configuration from device tree
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/3] DT Binding for omap3 temperature sensor
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/3] DT Binding for omap3 temperature sensor
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: OMAP34xx/36xx: Add temperature sensor
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/3] DT Binding for omap3 temperature sensor
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] add omap34xx temperature monitoring support
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH] add omap34xx temperature monitoring support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] add omap34xx temperature monitoring support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] add omap34xx temperature monitoring support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 3/3] ARM: dts: OMAP34xx/36xx: Add temperature sensor
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH] add omap34xx temperature monitoring support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/3] OMAP3 temperature sensor
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 1/3] DT Binding for omap3 temperature sensor
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: SuperMicro H8DG6-F-O IPMI BMC and lm_sensors
  • From: "G. Richard Bellamy" <rbellamy@xxxxxxxxxxxxx>
• Re: Trying to get lm_sensors working on an ASUS M5A97 R2.0 motherboard
  • From: Mark Hansen <meh@xxxxxxxxxxxx>
• Re: Trying to get lm_sensors working on an ASUS M5A97 R2.0 motherboard
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: SuperMicro H8DG6-F-O IPMI BMC and lm_sensors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Trying to get lm_sensors working on an ASUS M5A97 R2.0 motherboard
  • From: Mark Hansen <meh@xxxxxxxxxxxx>
• SuperMicro H8DG6-F-O IPMI BMC and lm_sensors
  • From: "G. Richard Bellamy" <rbellamy@xxxxxxxxxxxxx>
• [PATCH v2 8/8] hwmon: thermal: Code for using PWM FAN as a cooling device
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v2 5/8] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v2 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v2 6/8] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty cycle
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v2 3/8] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v2 0/8] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v2 2/8] thermal: Provide stub for thermal_cdev_update() function
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v2 7/8] hwmon: thermal: Read PWM FAN configuration from device tree
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Richard Llom <richard.llom@xxxxxxxxx>
• Re: [v7, 5/5] hwmon: ina2xx: allow to change the averaging rate at run-time
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device
  • From: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
• [PATCH 8/9] hwmon: thermal: Provide 'default-pulse-width' property to setup FAN on boot
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 9/9] hwmon: thermal: dts: Disable FAN on boot on the Odroid U3
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 7/9] hwmon: thermal: Code for using PWM FAN as a cooling device
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 5/9] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty cycle
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 6/9] hwmon: thermal: Read PWM FAN configuration from device tree
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 1/9] thermal: Provide stub for thermal_of_cooling_device_register() function
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 4/9] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 0/9] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 3/9] ARM: dts: Add pwm-fan node to the Odroid-U3 board
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH v7 0/5] hwmon: ina2xx: implement chip reinitialization and add new attributes
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Richard Llom <richard.llom@xxxxxxxxx>
• [RESEND PATCH v7 4/5] hwmon: ina2xx: make shunt resistance configurable at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [RESEND PATCH v7 5/5] hwmon: ina2xx: allow to change the averaging rate at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [RESEND PATCH v7 3/5] hwmon: ina2xx: don't accept shunt values greater than the calibration factor
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [RESEND PATCH v7 2/5] hwmon: ina2xx: remove a stray new line
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [RESEND PATCH v7 0/5] hwmon: ina2xx: implement chip reinitialization and add new attributes
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [RESEND PATCH v7 1/5] hwmon: ina2xx: reinitialize the chip in case it's been reset
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Richard Llom <richard.llom@xxxxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Richard Llom <richard.llom@xxxxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Richard Llom <richard.llom@xxxxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Richard Llom <richard.llom@xxxxxxxxx>
• Re: Supermicro X7DBU configuration
  • From: "Sean O'Brien" <sean451@xxxxxxxxxxx>
• Re: Supermicro X7DBU configuration
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: Supermicro X7DBU configuration
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: Supermicro X7DBU configuration
  • From: "Sean O'Brien" <sean451@xxxxxxxxxxx>
• Re: Supermicro X7DBU configuration
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Supermicro X7DBU configuration
  • From: "Sean O'Brien" <sean451@xxxxxxxxxxx>
• Re: Supermicro X7DBU configuration
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Supermicro X7DBU configuration
  • From: "Sean O'Brien" <sean451@xxxxxxxxxxx>
• Re: Supermicro X7DBU configuration
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Supermicro X7DBU configuration
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: Supermicro X7DBU configuration
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Collection of config files
  • From: Vojtech Pavlik <vojtech@xxxxxxx>
• Re: Supermicro X7DBU configuration
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Richard Llom <richard.llom@xxxxxxxxx>
• Re: Supermicro X7DBU configuration
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Supermicro X7DBU configuration
  • From: "Sean M. O'Brien" <sean451@xxxxxxxxxxx>
• [PATCH v7 5/5] hwmon: ina2xx: allow to change the averaging rate at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v7 4/5] hwmon: ina2xx: make shunt resistance configurable at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v7 0/5] hwmon: ina2xx: implement chip reinitialization and add new attributes
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v7 2/5] hwmon: ina2xx: remove a stray new line
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v7 3/5] hwmon: ina2xx: don't accept shunt values greater than the calibration factor
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v7 1/5] hwmon: ina2xx: reinitialize the chip in case it's been reset
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v6 1/5] hwmon: ina2xx: reinitialize the chip in case it's been reset
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v6 5/5] hwmon: ina2xx: allow to change the averaging rate at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v6 3/5] hwmon: ina2xx: don't accept shunt values greater than the calibration factor
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v6 1/5] hwmon: ina2xx: reinitialize the chip in case it's been reset
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v6 2/5] hwmon: ina2xx: remove a stray new line
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v6 4/5] hwmon: ina2xx: make shunt resistance configurable at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v6 0/5] hwmon: ina2xx: implement chip reinitialization and add new attributes
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v4] sensors-detect: Add code to detect TMP400 and TMP435
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4] sensors-detect: Add code to detect TMP400 and TMP435
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v5 1/3] hwmon: ina2xx: make shunt resistance configurable at run-time
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Richard Llom <richard.llom@xxxxxxxxx>
• [PATCH v4] sensors-detect: Add code to detect TMP400 and TMP435
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: System Monitor cannot read sensors anymore
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v3] sensors-detect: Add code to detect TMP400 and TMP435
  • From: Jean Delvare <jdelvare@xxxxxxx>
• System Monitor cannot read sensors anymore
  • From: Richard Llom <richard.llom@xxxxxxxxx>
• Re: [PATCH v5 1/3] hwmon: ina2xx: make shunt resistance configurable at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v5 1/3] hwmon: ina2xx: make shunt resistance configurable at run-time
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Is w83627ehf driver working with lm-sensors?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 1/3] hwmon: ina2xx: make shunt resistance configurable at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Is w83627ehf driver working with lm-sensors?
  • From: "Pablo Jose Royo" <pjroyo@xxxxxxxxxxxx>
• Re: [PATCH v5 1/3] hwmon: ina2xx: make shunt resistance configurable at run-time
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 3/3] hwmon: ina2xx: documentation update for new sysfs attributes
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v5 2/3] hwmon: ina2xx: allow to change the averaging rate at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v5 3/3] hwmon: ina2xx: documentation update for new sysfs attributes
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v5 1/3] hwmon: ina2xx: make shunt resistance configurable at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v5 0/3] hwmon: ina2xx: new attributes
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v3] sensors-detect: Add code to detect TMP400 and TMP435
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3] sensors-detect: Add code to detect TMP400 and TMP435
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3] sensors-detect: Add code to detect TMP400 and TMP435
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v3] sensors-detect: Add code to detect TMP400 and TMP435
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [GIT PULL] hwmon updates for 3.19
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [GIT PULL] hwmon updates for 3.19
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: [GIT PULL] hwmon updates for 3.19
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [GIT PULL] hwmon updates for 3.19
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3] sensors-detect: Add code to detect TMP400 and TMP435
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] sensors-detect: Add code to detect TMP435
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (tmp401) Detect TMP435 on all addresses it supports
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] sensors-detect: Add code to detect TMP435
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] hwmon: (tmp401) Detect TMP435 on all addresses it supports
  • From: Jean Delvare <jdelvare@xxxxxxx>
• libsensors python bindings: sensors.py
  • From: Pavel Rojtberg <mail@xxxxxxxxxxxx>
• [PATCH v2] sensors-detect: Add code to detect TMP435
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (tmp401) Detect TMP435 on all addresses it supports
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm75) Strengthen detect function
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] hwmon: (lm75) Strengthen detect function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm75) Strengthen detect function
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] sensors-detect: Add code to detect TMP435
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm75) Strengthen detect function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm75) Strengthen detect function
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] sensors-detect: Add code to detect TMP435
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] sensors-detect: Add code to detect TMP435
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] hwmon: (lm75) Strengthen detect function
  • From: Robert Coulson <rob.coulson@xxxxxxxxx>
• Re: [PATCH] sensors-detect: Add code to detect TMP435
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/3] hwmon: tmp401: add support for TI TMP435
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm75) Strengthen detect function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm75) Strengthen detect function
  • From: Robert Coulson <rob.coulson@xxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) Allow usage of gpio operations that may sleep
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) Allow usage of gpio operations that may sleep
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] sensors-detect: Add code to detect TMP435
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) Add a shutdown handler to poweroff the fans
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) Allow usage of gpio operations that may sleep
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: tmp401: add support for TI TMP435
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 0/3] hwmon: tmp401: support for TMP435 and fix for a probe issue
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (lm75) Strengthen detect function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: tmp401: add support for TI TMP435
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH] hwmon: (gpio-fan) Add a shutdown handler to poweroff the fans
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] hwmon: (gpio-fan) Allow usage of gpio operations that may sleep
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v3 3/3] hwmon: tmp401: bail-out from tmp401_probe() in case of write errors
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v3 2/3] hwmon: tmp401: add TMP435 to the list of supported chips in docs and Kconfig
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v3 1/3] hwmon: tmp401: add support for TI TMP435
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v3 0/3] hwmon: tmp401: support for TMP435 and fix for a probe issue
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] hwmon: tmp401: add support for TI TMP435
  • From: Patrick Titiano <ptitiano@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] hwmon: tmp401: bail-out from tmp401_probe() in case of write errors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] hwmon: tmp401: add support for TI TMP435
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 3/3] hwmon: tmp401: bail-out from tmp401_probe() in case of write errors
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v2 2/3] hwmon: tmp401: add TMP435 to the list of supported chips in docs and Kconfig
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v2 1/3] hwmon: tmp401: add support for TI TMP435
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v2 0/3] hwmon: tmp401: support for TMP435 and fix for a probe issue
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: tmp401: add support for TI TMP435
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: tmp401: bail-out from tmp401_probe() in case of write errors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: tmp401: add support for TI TMP435
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/2] hwmon: tmp401: bail-out from tmp401_probe() in case of write errors
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 0/2] hwmon: tmp401: support for TMP435 and fix for a probe issue
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 1/2] hwmon: tmp401: add support for TI TMP435
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: adt7475 driver: PWM invert configuration bit
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: adt7475 driver: PWM invert configuration bit
  • From: Curt Brune <curt@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 2/3] hwmon: ina2xx: allow to change the averaging rate at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v4 1/3] hwmon: ina2xx: make shunt resistance configurable at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v4 3/3] hwmon: ina2xx: documentation update for new sysfs attributes
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v4 0/3] hwmon: ina2xx: new attributes
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v3 2/3] hwmon: ina2xx: allow to change the averaging rate at run-time
  • From: Bartosz Golaszewski <bartekgola@xxxxxxxxx>
• [PATCH v3 1/3] hwmon: ina2xx: make shunt resistance configurable at run-time
  • From: Bartosz Golaszewski <bartekgola@xxxxxxxxx>
• [PATCH v3 3/3] hwmon: ina2xx: documentation update for new sysfs attributes
  • From: Bartosz Golaszewski <bartekgola@xxxxxxxxx>
• [PATCH v3 0/3] hwmon: ina2xx: new attributes
  • From: Bartosz Golaszewski <bartekgola@xxxxxxxxx>
• Re: adt7475 driver: PWM invert configuration bit
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• adt7475 driver: PWM invert configuration bit
  • From: Curt Brune <curt@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] hwmon: (lm95234) Add support for LM95233
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] hwmon: (lm95234) Add support for LM95233
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2 1/2] hwmon: (lm95245) Add support for LM95235
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] hwmon: (lm95245) Add support for LM95235
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 2/3] i8k: Rework error retries
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/3] i8k: Rework error retries
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 3/3] i8k: Add support for Dell XPS 13
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] i8k: Add support for Dell XPS 13
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/3] MAINTAINERS: Fix up entry for Dell laptop SMM driver
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v2 2/2] hwmon: (lm95234) Add support for LM95233
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 1/2] hwmon: (lm95245) Add support for LM95235
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/3] MAINTAINERS: Fix up entry for Dell laptop SMM driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/3] i8k: Rework error retries
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 3/3] i8k: Add support for Dell XPS 13
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 4/5] hwmon: ina2xx: change hex constants to lower-case
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/5] hwmon: ina2xx: make shunt resistance configurable at run-time
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 3/5] hwmon: ina2xx: allow to change the averaging rate at run-time
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/5] hwmon: ina2xx: bail-out from ina2xx_probe() in case of configuration errors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/5] hwmon: ina2xx: make shunt resistance configurable at run-time
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] i8k: Add support for temperature sensor labels
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• ITE IT8620E
  • From: Pavel Rojtberg <mail@xxxxxxxxxxxx>
• Re: libsensors license question - GPL or LGPL ?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: libsensors license question - GPL or LGPL ?
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/5] hwmon: ina2xx: bail-out from ina2xx_probe() in case of configuration errors
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v2 5/5] hwmon: ina2xx: documentation update for new sysfs attributes
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v2 4/5] hwmon: ina2xx: change hex constants to lower-case
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v2 3/5] hwmon: ina2xx: allow to change the averaging rate at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v2 1/5] hwmon: ina2xx: bail-out from ina2xx_probe() in case of configuration errors
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v2 2/5] hwmon: ina2xx: make shunt resistance configurable at run-time
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v2 0/5] hwmon: ina2xx: fixes & extensions
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• libsensors license question - GPL or LGPL ?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/5] hwmon: ina2xx: bail-out from ina2xx_probe() in case of configuration errors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: ASRock C2750D4I - Case fans are showing zero RPM and 1 is missing
  • From: Dulcow <dulcow@xxxxxxxxx>
• Re: ASRock C2750D4I - Case fans are showing zero RPM and 1 is missing
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [GIT PULL] hwmon fixes for 3.18-rc7
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: (nct6775) Documentation updates
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: (nct6775) Documentation updates
  • From: Jean Delvare <jdelvare@xxxxxxx>
• ASRock C2750D4I - Case fans are showing zero RPM and 1 is missing
  • From: Dulcow <dulcow@xxxxxxxxx>
• Re: [PATCH v2] hwmon: (nct6775) Documentation updates
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] sensors-detect: Nuvoton chip updates
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2] hwmon: (nct6775) Documentation updates
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v2] hwmon: (nct6775) Documentation updates
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (nct6775) Documentation updates
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (nct6775) Documentation updates
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v2 1/2] sensors-detect: Nuvoton chip updates
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 2/2] sensors-detect: EMC14xx chip updates
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCHv5 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCHv5 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCHv5 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCHv5 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCHv4 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCHv4 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH 2/2] sensors-detect: EMC14xx chip updates
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/2] sensors-detect: Nuvoton chip updates
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCHv0] hwmon: g762: fix call to devm_hwmon_device_register_with_groups()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCHv0] hwmon: g762: fix call to devm_hwmon_device_register_with_groups()
  • From: Arnaud Ebalard <arno@xxxxxxxxxxxx>
• Re: [PATCHv4 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Mikko Perttunen <mikko.perttunen@xxxxxxxx>
• Re: [PATCHv4 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Mikko Perttunen <mikko.perttunen@xxxxxxxx>
• Re: [PATCHv4 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCHv4 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCHv4 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Alexandre Courbot <gnurou@xxxxxxxxx>
• Re: [PATCH v2] hwmon: (lm75) Add support for the NXP LM75B
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/2] sensors-detect: EMC14xx chip updates
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/2] sensors-detect: Nuvoton chip updates
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Support for SMSC EMC1402
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Support for SMSC EMC1402
  • From: Juraj Fiala <doctorjellyface@xxxxxxxxxx>
• [PATCHv4 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH v2] hwmon: (lm75) Add support for the NXP LM75B
  • From: Michael Thalmeier <michael.thalmeier@xxxxxxx>
• Re: [PATCH 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCHv2 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCHv2 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCHv2 1/1] thermal: of: improve of-thermal sensor registration API
  • From: Mikko Perttunen <mikko.perttunen@xxxxxxxx>
• Re: [PATCH 2/2] hwmon: (lm95234) Add support for LM95233
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (nct6775) Documentation updates
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: (lm95234) Add support for LM95233
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/2] hwmon: (lm95245) Add support for LM95235
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/2] hwmon: (lm95245) Add support for LM95235
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 2/2] hwmon: (nct6775) Add blank lines after declarations
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/2] hwmon: (nct6775) Add support for NCT6792D
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 1/2] hwmon: (lm95245) Add support for LM95235
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/2] hwmon: (lm95234) Add support for LM95233
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/2] hwmon: (nct6775) Add support for NCT6792D
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/2] hwmon: (nct6775) Add blank lines after declarations
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Fancontrol memory consumption
  • From: Taz <rastataz@xxxxxxxxx>
• [GIT PULL] hwmon fixes for 3.18-rc5
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ibmpowernv) Convert to module_platform_driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (ibmpowernv) Convert to module_platform_driver
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• Re: [PATCH v2] hwmon: (ibmpowernv) Use platform 'id_table' to probe the device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: (ibmpowernv) Use platform 'id_table' to probe the device
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: Fancontrol memory consumption
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: Kaveri [and Radeon] temps
  • From: Aravind Gopalakrishnan <aravind.gopalakrishnan@xxxxxxx>
• Re: [PATCH] hwmon: (lm75) Add support for the NXP LM75B
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm75) put chip into shutdown mode on shutdown
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (lm75) put chip into shutdown mode on shutdown
  • From: Michael Thalmeier <michael.thalmeier@xxxxxxx>
• [PATCH] hwmon: (lm75) Add support for the NXP LM75B
  • From: Michael Thalmeier <michael.thalmeier@xxxxxxx>