Re: [PATCH v5 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Feb 25, 2015 at 02:29:18PM -0400, Eduardo Valentin wrote:
> Guenter,
> 
> On Wed, Feb 25, 2015 at 09:18:20AM -0800, Guenter Roeck wrote:
> > On Wed, Feb 25, 2015 at 04:34:16PM +0100, Lukasz Majewski wrote:
> > > Presented patches add support for Odroid's U3 optional CPU FAN, which uses PWM
> > > subsystem for low level control.
> > > 
> > > After successful probe it registers itself as a cooling device for thermal
> > > subsystem.
> > > 
> > > This driver also supports devices without DTS specified.
> > > 
> > > To provide correct functionality, new properties to device tree description for
> > > Exynos4412 and in particular Odroid U3 have been added.
> > > 
> > > Those patches were tested at Exynos4412 - Odroid U3 board.
> > > 
> > > Patches were applied on:
> > > linux-soc-thermal/fixes branch (Linux v4.0-rc1)
> > > SHA1: b71d399c7f2fe06b60b96155ec0b9ae167334e4a
> > > 
> > > Kamil Debski (1):
> > >   ARM: dts: Add pwm-fan node to the Odroid-U3 board
> > > 
> > > Lukasz Majewski (5):
> > >   Documentation: dts: Documentation entry to explain how to use PWM FAN
> > >     as a cooling device
> > >   ARM: dts: Add properties to use pwm-fan device as a cooling device in
> > >     Odroid U3
> > >   hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty
> > >     cycle
> > >   hwmon: pwm-fan: Read PWM FAN configuration from device tree
> > >   hwmon: pwm-fan: Code for using PWM FAN as a cooling device
> > > 
> > >  .../devicetree/bindings/hwmon/pwm-fan.txt          |  25 +++-
> > >  arch/arm/boot/dts/exynos4.dtsi                     |   2 +-
> > >  arch/arm/boot/dts/exynos4412-odroidu3.dts          |  43 ++++++
> > >  drivers/hwmon/pwm-fan.c                            | 166 +++++++++++++++++++--
> > >  4 files changed, 220 insertions(+), 16 deletions(-)
> > > 
> > For the series:
> > 
> > Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> > 
> > Should I take it through hwmon ? Might make sense given the majority
> > of the changes is in hwmon code.
> 
> I believe the series should go via your tree, yes. I had only minor
> comments in the code added for the cooling device code, as it lacks the
> unregistration call in the .remove callback. 
> 
> Also, the DTS changes may generate conflicts with platform code. Lukasz
> may probably ask  Kukjin Kim to add them via the samsung tree.
> 
Ok, I'll wait for the updated patch and then add the hwmon parts to hwmon-next.

Thanks,
Guenter

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors




[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux