From: Grygorii Strashko <Grygorii.Strashko@xxxxxxxxxx> Setting a dev_pm_ops suspend/resume pair but not a set of hibernation functions means those pm functions will not be called upon hibernation. Fix this by using SIMPLE_DEV_PM_OPS, which appropriately assigns the suspend and hibernation handlers and move mp102_suspend/tmp102_resume under CONFIG_PM_SLEEP to avoid build warnings. Signed-off-by: Grygorii Strashko <Grygorii.Strashko@xxxxxxxxxx> --- V1: - https://lkml.org/lkml/2015/2/2/509 drivers/hwmon/tmp102.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c index ba9f478..565df47 100644 --- a/drivers/hwmon/tmp102.c +++ b/drivers/hwmon/tmp102.c @@ -253,7 +253,7 @@ static int tmp102_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int tmp102_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); @@ -279,17 +279,10 @@ static int tmp102_resume(struct device *dev) config &= ~TMP102_CONF_SD; return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config); } - -static const struct dev_pm_ops tmp102_dev_pm_ops = { - .suspend = tmp102_suspend, - .resume = tmp102_resume, -}; - -#define TMP102_DEV_PM_OPS (&tmp102_dev_pm_ops) -#else -#define TMP102_DEV_PM_OPS NULL #endif /* CONFIG_PM */ +SIMPLE_DEV_PM_OPS(tmp102_dev_pm_ops, tmp102_suspend, tmp102_resume); + static const struct i2c_device_id tmp102_id[] = { { "tmp102", 0 }, { } @@ -298,7 +291,7 @@ MODULE_DEVICE_TABLE(i2c, tmp102_id); static struct i2c_driver tmp102_driver = { .driver.name = DRIVER_NAME, - .driver.pm = TMP102_DEV_PM_OPS, + .driver.pm = &tmp102_dev_pm_ops, .probe = tmp102_probe, .remove = tmp102_remove, .id_table = tmp102_id, -- 1.9.1 _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
