Hi I have a Nexcom vehicular console running Ubuntu 14.04 LTS (x86_64) with voltage monitoring enabled in BIOS. I´m using both 3.13.0-32 and 3.13.11.10 x86_64 kernels, with winbond w83627ehf driver (loaded using modprobe force_id=0x8850) I need to check when input voltage is low in order to shutdown the system in proper way. Using lm-sensors from the distribution, or from last source, i always see same values in all voltage sensors (Vcc, CPU,..etc) . I mean, there is no CHANGE in it when I vary input voltage from a variable power supply (with constant current limit to emulate a battery). My /etc/sensor3.conf is Ok for this chip. Temperature sensors seem to work with this driver (and with coretemp). Do you know if lm-sensors works with this driver? What more could I check? In sources, I see last date shown is 2012, so it seems quite recent. Thank you! _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
