On Thu 2015-01-08 21:29:19, Pavel Machek wrote: > Hi! > > Plus, no matter what I do, I can't control the pwm2 (only one used on > my board): > > root@amd:/sys/class/hwmon/hwmon1/device# cat pwm2 > 80 > root@amd:/sys/class/hwmon/hwmon1/device# echo 0 > pwm2 > root@amd:/sys/class/hwmon/hwmon1/device# cat pwm2 > 80 > root@amd:/sys/class/hwmon/hwmon1/device# > > I tried playing with other files, too, but no luck. Documentation > mentions: > > Note: last six functions are influenced by other control bits, not yet > exported > by the driver, so a change might not have any effect. > > > Any ideas what bits those are, and what needs to be implemented? (I'm > currently reading through the documentation). I have pwm2_mode set to 1. I can set it to 0 and can hear the fan spinning up, and rpm go to >1500. So I have _some_ kind of control... But normally fan is around 800, and nothing else seems to change it... Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
