From: Kamil Debski <k.debski@xxxxxxxxxxx> Add pwm-fan node to the Odroid-U3 board file to enable PWM control of the cooling fan. In addition, add the "pwm" label to the pwm@139D0000 node in the exynos4412.dtsi. Signed-off-by: Kamil Debski <k.debski@xxxxxxxxxxx> [Rebased on the newest mainline by l.majewski@xxxxxxxxxxx] --- Changes since v1: - added pwm label to the pwm@139D0000 node in exynos4.dtsi - use the pwm label in the exynos4412-odroidu3.dts - change order or properties in the pwn-fan node, to be sorted in alphabetical order --- arch/arm/boot/dts/exynos4.dtsi | 2 +- arch/arm/boot/dts/exynos4412-odroidu3.dts | 13 +++++++++++++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index f18d746..75266e3 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -582,7 +582,7 @@ status = "disabled"; }; - pwm@139D0000 { + pwm: pwm@139D0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x139D0000 0x1000>; interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index c8a64be..60bd1e4 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -31,6 +31,19 @@ linux,default-trigger = "heartbeat"; }; }; + + pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 0 10000 0>; + status = "okay"; + }; +}; + +&pwm { + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <0>; + status = "okay"; }; &usb3503 { -- 2.0.0.rc2 _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors